Python distutils.sysconfig.get_config_h_filename() Examples
The following are 30
code examples of distutils.sysconfig.get_config_h_filename().
You can vote up the ones you like or vote down the ones you don't like,
and go to the original project or source file by following the links above each example.
You may also want to check out all available functions/classes of the module
distutils.sysconfig
, or try the search function
.
.
Example #1
| Source File: test_cygwinccompiler.py From Imogen with MIT License | 5 votes |
|
def tearDown(self):
sys.version = self.version
from distutils import sysconfig
sysconfig.get_config_h_filename = self.old_get_config_h_filename
cygwinccompiler.find_executable = self.old_find_executable
cygwinccompiler.Popen = self.old_popen
super(CygwinCCompilerTestCase, self).tearDown()
Example #2
| Source File: emxccompiler.py From medicare-demo with Apache License 2.0 | 5 votes |
|
def check_config_h():
"""Check if the current Python installation (specifically, pyconfig.h)
appears amenable to building extensions with GCC. Returns a tuple
(status, details), where 'status' is one of the following constants:
CONFIG_H_OK
all is well, go ahead and compile
CONFIG_H_NOTOK
doesn't look good
CONFIG_H_UNCERTAIN
not sure -- unable to read pyconfig.h
'details' is a human-readable string explaining the situation.
Note there are two ways to conclude "OK": either 'sys.version' contains
the string "GCC" (implying that this Python was built with GCC), or the
installed "pyconfig.h" contains the string "__GNUC__".
"""
# XXX since this function also checks sys.version, it's not strictly a
# "pyconfig.h" check -- should probably be renamed...
from distutils import sysconfig
import string
# if sys.version contains GCC then python was compiled with
# GCC, and the pyconfig.h file should be OK
if string.find(sys.version,"GCC") >= 0:
return (CONFIG_H_OK, "sys.version mentions 'GCC'")
fn = sysconfig.get_config_h_filename()
try:
# It would probably better to read single lines to search.
# But we do this only once, and it is fast enough
f = open(fn)
s = f.read()
f.close()
except IOError, exc:
# if we can't read this file, we cannot say it is wrong
# the compiler will complain later about this file as missing
return (CONFIG_H_UNCERTAIN,
"couldn't read '%s': %s" % (fn, exc.strerror))
Example #3
| Source File: cygwinccompiler.py From medicare-demo with Apache License 2.0 | 5 votes |
|
def check_config_h():
"""Check if the current Python installation (specifically, pyconfig.h)
appears amenable to building extensions with GCC. Returns a tuple
(status, details), where 'status' is one of the following constants:
CONFIG_H_OK
all is well, go ahead and compile
CONFIG_H_NOTOK
doesn't look good
CONFIG_H_UNCERTAIN
not sure -- unable to read pyconfig.h
'details' is a human-readable string explaining the situation.
Note there are two ways to conclude "OK": either 'sys.version' contains
the string "GCC" (implying that this Python was built with GCC), or the
installed "pyconfig.h" contains the string "__GNUC__".
"""
# XXX since this function also checks sys.version, it's not strictly a
# "pyconfig.h" check -- should probably be renamed...
from distutils import sysconfig
import string
# if sys.version contains GCC then python was compiled with
# GCC, and the pyconfig.h file should be OK
if string.find(sys.version,"GCC") >= 0:
return (CONFIG_H_OK, "sys.version mentions 'GCC'")
fn = sysconfig.get_config_h_filename()
try:
# It would probably better to read single lines to search.
# But we do this only once, and it is fast enough
f = open(fn)
s = f.read()
f.close()
except IOError, exc:
# if we can't read this file, we cannot say it is wrong
# the compiler will complain later about this file as missing
return (CONFIG_H_UNCERTAIN,
"couldn't read '%s': %s" % (fn, exc.strerror))
Example #4
| Source File: test_cygwinccompiler.py From Project-New-Reign---Nemesis-Main with GNU General Public License v3.0 | 5 votes |
|
def tearDown(self):
sys.version = self.version
from distutils import sysconfig
sysconfig.get_config_h_filename = self.old_get_config_h_filename
cygwinccompiler.find_executable = self.old_find_executable
cygwinccompiler.Popen = self.old_popen
super(CygwinCCompilerTestCase, self).tearDown()
Example #5
| Source File: test_cygwinccompiler.py From Project-New-Reign---Nemesis-Main with GNU General Public License v3.0 | 5 votes |
|
def setUp(self):
super(CygwinCCompilerTestCase, self).setUp()
self.version = sys.version
self.python_h = os.path.join(self.mkdtemp(), 'python.h')
from distutils import sysconfig
self.old_get_config_h_filename = sysconfig.get_config_h_filename
sysconfig.get_config_h_filename = self._get_config_h_filename
self.old_find_executable = cygwinccompiler.find_executable
cygwinccompiler.find_executable = self._find_executable
self._exes = {}
self.old_popen = cygwinccompiler.Popen
FakePopen.test_class = self
cygwinccompiler.Popen = FakePopen
Example #6
| Source File: test_sysconfig.py From Project-New-Reign---Nemesis-Main with GNU General Public License v3.0 | 5 votes |
|
def test_get_config_h_filename(self):
config_h = sysconfig.get_config_h_filename()
self.assertTrue(os.path.isfile(config_h), config_h)
Example #7
| Source File: test_cygwinccompiler.py From setuptools with MIT License | 5 votes |
|
def tearDown(self):
sys.version = self.version
from distutils import sysconfig
sysconfig.get_config_h_filename = self.old_get_config_h_filename
cygwinccompiler.find_executable = self.old_find_executable
cygwinccompiler.Popen = self.old_popen
super(CygwinCCompilerTestCase, self).tearDown()
Example #8
| Source File: test_cygwinccompiler.py From setuptools with MIT License | 5 votes |
|
def setUp(self):
super(CygwinCCompilerTestCase, self).setUp()
self.version = sys.version
self.python_h = os.path.join(self.mkdtemp(), 'python.h')
from distutils import sysconfig
self.old_get_config_h_filename = sysconfig.get_config_h_filename
sysconfig.get_config_h_filename = self._get_config_h_filename
self.old_find_executable = cygwinccompiler.find_executable
cygwinccompiler.find_executable = self._find_executable
self._exes = {}
self.old_popen = cygwinccompiler.Popen
FakePopen.test_class = self
cygwinccompiler.Popen = FakePopen
Example #9
| Source File: test_sysconfig.py From setuptools with MIT License | 5 votes |
|
def test_get_config_h_filename(self):
config_h = sysconfig.get_config_h_filename()
self.assertTrue(os.path.isfile(config_h), config_h)
Example #10
| Source File: test_cygwinccompiler.py From ironpython3 with Apache License 2.0 | 5 votes |
|
def tearDown(self):
sys.version = self.version
from distutils import sysconfig
sysconfig.get_config_h_filename = self.old_get_config_h_filename
cygwinccompiler.find_executable = self.old_find_executable
cygwinccompiler.Popen = self.old_popen
super(CygwinCCompilerTestCase, self).tearDown()
Example #11
| Source File: test_cygwinccompiler.py From ironpython3 with Apache License 2.0 | 5 votes |
|
def setUp(self):
super(CygwinCCompilerTestCase, self).setUp()
self.version = sys.version
self.python_h = os.path.join(self.mkdtemp(), 'python.h')
from distutils import sysconfig
self.old_get_config_h_filename = sysconfig.get_config_h_filename
sysconfig.get_config_h_filename = self._get_config_h_filename
self.old_find_executable = cygwinccompiler.find_executable
cygwinccompiler.find_executable = self._find_executable
self._exes = {}
self.old_popen = cygwinccompiler.Popen
FakePopen.test_class = self
cygwinccompiler.Popen = FakePopen
Example #12
| Source File: test_sysconfig.py From ironpython3 with Apache License 2.0 | 5 votes |
|
def test_get_config_h_filename(self):
config_h = sysconfig.get_config_h_filename()
self.assertTrue(os.path.isfile(config_h), config_h)
Example #13
| Source File: test_cygwinccompiler.py From Imogen with MIT License | 5 votes |
|
def setUp(self):
super(CygwinCCompilerTestCase, self).setUp()
self.version = sys.version
self.python_h = os.path.join(self.mkdtemp(), 'python.h')
from distutils import sysconfig
self.old_get_config_h_filename = sysconfig.get_config_h_filename
sysconfig.get_config_h_filename = self._get_config_h_filename
self.old_find_executable = cygwinccompiler.find_executable
cygwinccompiler.find_executable = self._find_executable
self._exes = {}
self.old_popen = cygwinccompiler.Popen
FakePopen.test_class = self
cygwinccompiler.Popen = FakePopen
Example #14
| Source File: test_sysconfig.py From Imogen with MIT License | 5 votes |
|
def test_get_config_h_filename(self):
config_h = sysconfig.get_config_h_filename()
self.assertTrue(os.path.isfile(config_h), config_h)
Example #15
| Source File: test_cygwinccompiler.py From Fluid-Designer with GNU General Public License v3.0 | 5 votes |
|
def setUp(self):
super(CygwinCCompilerTestCase, self).setUp()
self.version = sys.version
self.python_h = os.path.join(self.mkdtemp(), 'python.h')
from distutils import sysconfig
self.old_get_config_h_filename = sysconfig.get_config_h_filename
sysconfig.get_config_h_filename = self._get_config_h_filename
self.old_find_executable = cygwinccompiler.find_executable
cygwinccompiler.find_executable = self._find_executable
self._exes = {}
self.old_popen = cygwinccompiler.Popen
FakePopen.test_class = self
cygwinccompiler.Popen = FakePopen
Example #16
| Source File: test_sysconfig.py From Fluid-Designer with GNU General Public License v3.0 | 5 votes |
|
def test_get_config_h_filename(self):
config_h = sysconfig.get_config_h_filename()
self.assertTrue(os.path.isfile(config_h), config_h)
Example #17
| Source File: test_sysconfig.py From android_universal with MIT License | 5 votes |
|
def test_get_config_h_filename(self):
config_h = sysconfig.get_config_h_filename()
self.assertTrue(os.path.isfile(config_h), config_h)
Example #18
| Source File: test_cygwinccompiler.py From Fluid-Designer with GNU General Public License v3.0 | 5 votes |
|
def tearDown(self):
sys.version = self.version
from distutils import sysconfig
sysconfig.get_config_h_filename = self.old_get_config_h_filename
cygwinccompiler.find_executable = self.old_find_executable
cygwinccompiler.Popen = self.old_popen
super(CygwinCCompilerTestCase, self).tearDown()
Example #19
| Source File: test_cygwinccompiler.py From android_universal with MIT License | 5 votes |
|
def setUp(self):
super(CygwinCCompilerTestCase, self).setUp()
self.version = sys.version
self.python_h = os.path.join(self.mkdtemp(), 'python.h')
from distutils import sysconfig
self.old_get_config_h_filename = sysconfig.get_config_h_filename
sysconfig.get_config_h_filename = self._get_config_h_filename
self.old_find_executable = cygwinccompiler.find_executable
cygwinccompiler.find_executable = self._find_executable
self._exes = {}
self.old_popen = cygwinccompiler.Popen
FakePopen.test_class = self
cygwinccompiler.Popen = FakePopen
Example #20
| Source File: test_cygwinccompiler.py From android_universal with MIT License | 5 votes |
|
def tearDown(self):
sys.version = self.version
from distutils import sysconfig
sysconfig.get_config_h_filename = self.old_get_config_h_filename
cygwinccompiler.find_executable = self.old_find_executable
cygwinccompiler.Popen = self.old_popen
super(CygwinCCompilerTestCase, self).tearDown()
Example #21
| Source File: cygwinccompiler.py From RevitBatchProcessor with GNU General Public License v3.0 | 4 votes |
|
def check_config_h():
"""Check if the current Python installation (specifically, pyconfig.h)
appears amenable to building extensions with GCC. Returns a tuple
(status, details), where 'status' is one of the following constants:
CONFIG_H_OK
all is well, go ahead and compile
CONFIG_H_NOTOK
doesn't look good
CONFIG_H_UNCERTAIN
not sure -- unable to read pyconfig.h
'details' is a human-readable string explaining the situation.
Note there are two ways to conclude "OK": either 'sys.version' contains
the string "GCC" (implying that this Python was built with GCC), or the
installed "pyconfig.h" contains the string "__GNUC__".
"""
# XXX since this function also checks sys.version, it's not strictly a
# "pyconfig.h" check -- should probably be renamed...
from distutils import sysconfig
import string
# if sys.version contains GCC then python was compiled with
# GCC, and the pyconfig.h file should be OK
if string.find(sys.version,"GCC") >= 0:
return (CONFIG_H_OK, "sys.version mentions 'GCC'")
fn = sysconfig.get_config_h_filename()
try:
# It would probably better to read single lines to search.
# But we do this only once, and it is fast enough
f = open(fn)
try:
s = f.read()
finally:
f.close()
except IOError, exc:
# if we can't read this file, we cannot say it is wrong
# the compiler will complain later about this file as missing
return (CONFIG_H_UNCERTAIN,
"couldn't read '%s': %s" % (fn, exc.strerror))
Example #22
| Source File: cygwinccompiler.py From meddle with MIT License | 4 votes |
|
def check_config_h():
"""Check if the current Python installation (specifically, pyconfig.h)
appears amenable to building extensions with GCC. Returns a tuple
(status, details), where 'status' is one of the following constants:
CONFIG_H_OK
all is well, go ahead and compile
CONFIG_H_NOTOK
doesn't look good
CONFIG_H_UNCERTAIN
not sure -- unable to read pyconfig.h
'details' is a human-readable string explaining the situation.
Note there are two ways to conclude "OK": either 'sys.version' contains
the string "GCC" (implying that this Python was built with GCC), or the
installed "pyconfig.h" contains the string "__GNUC__".
"""
# XXX since this function also checks sys.version, it's not strictly a
# "pyconfig.h" check -- should probably be renamed...
from distutils import sysconfig
import string
# if sys.version contains GCC then python was compiled with
# GCC, and the pyconfig.h file should be OK
if string.find(sys.version,"GCC") >= 0:
return (CONFIG_H_OK, "sys.version mentions 'GCC'")
fn = sysconfig.get_config_h_filename()
try:
# It would probably better to read single lines to search.
# But we do this only once, and it is fast enough
f = open(fn)
try:
s = f.read()
finally:
f.close()
except IOError, exc:
# if we can't read this file, we cannot say it is wrong
# the compiler will complain later about this file as missing
return (CONFIG_H_UNCERTAIN,
"couldn't read '%s': %s" % (fn, exc.strerror))
Example #23
| Source File: cygwinccompiler.py From CTFCrackTools with GNU General Public License v3.0 | 4 votes |
|
def check_config_h():
"""Check if the current Python installation (specifically, pyconfig.h)
appears amenable to building extensions with GCC. Returns a tuple
(status, details), where 'status' is one of the following constants:
CONFIG_H_OK
all is well, go ahead and compile
CONFIG_H_NOTOK
doesn't look good
CONFIG_H_UNCERTAIN
not sure -- unable to read pyconfig.h
'details' is a human-readable string explaining the situation.
Note there are two ways to conclude "OK": either 'sys.version' contains
the string "GCC" (implying that this Python was built with GCC), or the
installed "pyconfig.h" contains the string "__GNUC__".
"""
# XXX since this function also checks sys.version, it's not strictly a
# "pyconfig.h" check -- should probably be renamed...
from distutils import sysconfig
import string
# if sys.version contains GCC then python was compiled with
# GCC, and the pyconfig.h file should be OK
if string.find(sys.version,"GCC") >= 0:
return (CONFIG_H_OK, "sys.version mentions 'GCC'")
fn = sysconfig.get_config_h_filename()
try:
# It would probably better to read single lines to search.
# But we do this only once, and it is fast enough
f = open(fn)
try:
s = f.read()
finally:
f.close()
except IOError, exc:
# if we can't read this file, we cannot say it is wrong
# the compiler will complain later about this file as missing
return (CONFIG_H_UNCERTAIN,
"couldn't read '%s': %s" % (fn, exc.strerror))
Example #24
| Source File: emxccompiler.py From CTFCrackTools with GNU General Public License v3.0 | 4 votes |
|
def check_config_h():
"""Check if the current Python installation (specifically, pyconfig.h)
appears amenable to building extensions with GCC. Returns a tuple
(status, details), where 'status' is one of the following constants:
CONFIG_H_OK
all is well, go ahead and compile
CONFIG_H_NOTOK
doesn't look good
CONFIG_H_UNCERTAIN
not sure -- unable to read pyconfig.h
'details' is a human-readable string explaining the situation.
Note there are two ways to conclude "OK": either 'sys.version' contains
the string "GCC" (implying that this Python was built with GCC), or the
installed "pyconfig.h" contains the string "__GNUC__".
"""
# XXX since this function also checks sys.version, it's not strictly a
# "pyconfig.h" check -- should probably be renamed...
from distutils import sysconfig
import string
# if sys.version contains GCC then python was compiled with
# GCC, and the pyconfig.h file should be OK
if string.find(sys.version,"GCC") >= 0:
return (CONFIG_H_OK, "sys.version mentions 'GCC'")
fn = sysconfig.get_config_h_filename()
try:
# It would probably better to read single lines to search.
# But we do this only once, and it is fast enough
f = open(fn)
try:
s = f.read()
finally:
f.close()
except IOError, exc:
# if we can't read this file, we cannot say it is wrong
# the compiler will complain later about this file as missing
return (CONFIG_H_UNCERTAIN,
"couldn't read '%s': %s" % (fn, exc.strerror))
Example #25
| Source File: cygwinccompiler.py From CTFCrackTools with GNU General Public License v3.0 | 4 votes |
|
def check_config_h():
"""Check if the current Python installation (specifically, pyconfig.h)
appears amenable to building extensions with GCC. Returns a tuple
(status, details), where 'status' is one of the following constants:
CONFIG_H_OK
all is well, go ahead and compile
CONFIG_H_NOTOK
doesn't look good
CONFIG_H_UNCERTAIN
not sure -- unable to read pyconfig.h
'details' is a human-readable string explaining the situation.
Note there are two ways to conclude "OK": either 'sys.version' contains
the string "GCC" (implying that this Python was built with GCC), or the
installed "pyconfig.h" contains the string "__GNUC__".
"""
# XXX since this function also checks sys.version, it's not strictly a
# "pyconfig.h" check -- should probably be renamed...
from distutils import sysconfig
import string
# if sys.version contains GCC then python was compiled with
# GCC, and the pyconfig.h file should be OK
if string.find(sys.version,"GCC") >= 0:
return (CONFIG_H_OK, "sys.version mentions 'GCC'")
fn = sysconfig.get_config_h_filename()
try:
# It would probably better to read single lines to search.
# But we do this only once, and it is fast enough
f = open(fn)
try:
s = f.read()
finally:
f.close()
except IOError, exc:
# if we can't read this file, we cannot say it is wrong
# the compiler will complain later about this file as missing
return (CONFIG_H_UNCERTAIN,
"couldn't read '%s': %s" % (fn, exc.strerror))
Example #26
| Source File: emxccompiler.py From canape with GNU General Public License v3.0 | 4 votes |
|
def check_config_h():
"""Check if the current Python installation (specifically, pyconfig.h)
appears amenable to building extensions with GCC. Returns a tuple
(status, details), where 'status' is one of the following constants:
CONFIG_H_OK
all is well, go ahead and compile
CONFIG_H_NOTOK
doesn't look good
CONFIG_H_UNCERTAIN
not sure -- unable to read pyconfig.h
'details' is a human-readable string explaining the situation.
Note there are two ways to conclude "OK": either 'sys.version' contains
the string "GCC" (implying that this Python was built with GCC), or the
installed "pyconfig.h" contains the string "__GNUC__".
"""
# XXX since this function also checks sys.version, it's not strictly a
# "pyconfig.h" check -- should probably be renamed...
from distutils import sysconfig
import string
# if sys.version contains GCC then python was compiled with
# GCC, and the pyconfig.h file should be OK
if string.find(sys.version,"GCC") >= 0:
return (CONFIG_H_OK, "sys.version mentions 'GCC'")
fn = sysconfig.get_config_h_filename()
try:
# It would probably better to read single lines to search.
# But we do this only once, and it is fast enough
f = open(fn)
try:
s = f.read()
finally:
f.close()
except IOError, exc:
# if we can't read this file, we cannot say it is wrong
# the compiler will complain later about this file as missing
return (CONFIG_H_UNCERTAIN,
"couldn't read '%s': %s" % (fn, exc.strerror))
Example #27
| Source File: emxccompiler.py From CTFCrackTools-V2 with GNU General Public License v3.0 | 4 votes |
|
def check_config_h():
"""Check if the current Python installation (specifically, pyconfig.h)
appears amenable to building extensions with GCC. Returns a tuple
(status, details), where 'status' is one of the following constants:
CONFIG_H_OK
all is well, go ahead and compile
CONFIG_H_NOTOK
doesn't look good
CONFIG_H_UNCERTAIN
not sure -- unable to read pyconfig.h
'details' is a human-readable string explaining the situation.
Note there are two ways to conclude "OK": either 'sys.version' contains
the string "GCC" (implying that this Python was built with GCC), or the
installed "pyconfig.h" contains the string "__GNUC__".
"""
# XXX since this function also checks sys.version, it's not strictly a
# "pyconfig.h" check -- should probably be renamed...
from distutils import sysconfig
import string
# if sys.version contains GCC then python was compiled with
# GCC, and the pyconfig.h file should be OK
if string.find(sys.version,"GCC") >= 0:
return (CONFIG_H_OK, "sys.version mentions 'GCC'")
fn = sysconfig.get_config_h_filename()
try:
# It would probably better to read single lines to search.
# But we do this only once, and it is fast enough
f = open(fn)
try:
s = f.read()
finally:
f.close()
except IOError, exc:
# if we can't read this file, we cannot say it is wrong
# the compiler will complain later about this file as missing
return (CONFIG_H_UNCERTAIN,
"couldn't read '%s': %s" % (fn, exc.strerror))
Example #28
| Source File: cygwinccompiler.py From CTFCrackTools-V2 with GNU General Public License v3.0 | 4 votes |
|
def check_config_h():
"""Check if the current Python installation (specifically, pyconfig.h)
appears amenable to building extensions with GCC. Returns a tuple
(status, details), where 'status' is one of the following constants:
CONFIG_H_OK
all is well, go ahead and compile
CONFIG_H_NOTOK
doesn't look good
CONFIG_H_UNCERTAIN
not sure -- unable to read pyconfig.h
'details' is a human-readable string explaining the situation.
Note there are two ways to conclude "OK": either 'sys.version' contains
the string "GCC" (implying that this Python was built with GCC), or the
installed "pyconfig.h" contains the string "__GNUC__".
"""
# XXX since this function also checks sys.version, it's not strictly a
# "pyconfig.h" check -- should probably be renamed...
from distutils import sysconfig
import string
# if sys.version contains GCC then python was compiled with
# GCC, and the pyconfig.h file should be OK
if string.find(sys.version,"GCC") >= 0:
return (CONFIG_H_OK, "sys.version mentions 'GCC'")
fn = sysconfig.get_config_h_filename()
try:
# It would probably better to read single lines to search.
# But we do this only once, and it is fast enough
f = open(fn)
try:
s = f.read()
finally:
f.close()
except IOError, exc:
# if we can't read this file, we cannot say it is wrong
# the compiler will complain later about this file as missing
return (CONFIG_H_UNCERTAIN,
"couldn't read '%s': %s" % (fn, exc.strerror))
Example #29
| Source File: emxccompiler.py From CTFCrackTools-V2 with GNU General Public License v3.0 | 4 votes |
|
def check_config_h():
"""Check if the current Python installation (specifically, pyconfig.h)
appears amenable to building extensions with GCC. Returns a tuple
(status, details), where 'status' is one of the following constants:
CONFIG_H_OK
all is well, go ahead and compile
CONFIG_H_NOTOK
doesn't look good
CONFIG_H_UNCERTAIN
not sure -- unable to read pyconfig.h
'details' is a human-readable string explaining the situation.
Note there are two ways to conclude "OK": either 'sys.version' contains
the string "GCC" (implying that this Python was built with GCC), or the
installed "pyconfig.h" contains the string "__GNUC__".
"""
# XXX since this function also checks sys.version, it's not strictly a
# "pyconfig.h" check -- should probably be renamed...
from distutils import sysconfig
import string
# if sys.version contains GCC then python was compiled with
# GCC, and the pyconfig.h file should be OK
if string.find(sys.version,"GCC") >= 0:
return (CONFIG_H_OK, "sys.version mentions 'GCC'")
fn = sysconfig.get_config_h_filename()
try:
# It would probably better to read single lines to search.
# But we do this only once, and it is fast enough
f = open(fn)
try:
s = f.read()
finally:
f.close()
except IOError, exc:
# if we can't read this file, we cannot say it is wrong
# the compiler will complain later about this file as missing
return (CONFIG_H_UNCERTAIN,
"couldn't read '%s': %s" % (fn, exc.strerror))
Example #30
| Source File: cygwinccompiler.py From canape with GNU General Public License v3.0 | 4 votes |
|
def check_config_h():
"""Check if the current Python installation (specifically, pyconfig.h)
appears amenable to building extensions with GCC. Returns a tuple
(status, details), where 'status' is one of the following constants:
CONFIG_H_OK
all is well, go ahead and compile
CONFIG_H_NOTOK
doesn't look good
CONFIG_H_UNCERTAIN
not sure -- unable to read pyconfig.h
'details' is a human-readable string explaining the situation.
Note there are two ways to conclude "OK": either 'sys.version' contains
the string "GCC" (implying that this Python was built with GCC), or the
installed "pyconfig.h" contains the string "__GNUC__".
"""
# XXX since this function also checks sys.version, it's not strictly a
# "pyconfig.h" check -- should probably be renamed...
from distutils import sysconfig
import string
# if sys.version contains GCC then python was compiled with
# GCC, and the pyconfig.h file should be OK
if string.find(sys.version,"GCC") >= 0:
return (CONFIG_H_OK, "sys.version mentions 'GCC'")
fn = sysconfig.get_config_h_filename()
try:
# It would probably better to read single lines to search.
# But we do this only once, and it is fast enough
f = open(fn)
try:
s = f.read()
finally:
f.close()
except IOError, exc:
# if we can't read this file, we cannot say it is wrong
# the compiler will complain later about this file as missing
return (CONFIG_H_UNCERTAIN,
"couldn't read '%s': %s" % (fn, exc.strerror))
