Python zipfile._EndRecData() Examples

The following are 30 code examples of zipfile._EndRecData(). You can vote up the ones you like or vote down the ones you don't like, and go to the original project or source file by following the links above each example. You may also want to check out all available functions/classes of the module zipfile , or try the search function .
Example #1
Source File: easy_install.py    From syntheticmass with Apache License 2.0 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #2
Source File: easy_install.py    From Financial-Portfolio-Flask with MIT License 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #3
Source File: easy_install.py    From planespotter with MIT License 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #4
Source File: easy_install.py    From rules_pip with MIT License 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #5
Source File: easy_install.py    From CTFCrackTools with GNU General Public License v3.0 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #6
Source File: easy_install.py    From Ansible with MIT License 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #7
Source File: easy_install.py    From Serverless-Deep-Learning-with-TensorFlow-and-AWS-Lambda with MIT License 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #8
Source File: easy_install.py    From setuptools with MIT License 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #9
Source File: easy_install.py    From PhonePi_SampleServer with MIT License 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #10
Source File: easy_install.py    From stopstalk-deployment with MIT License 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #11
Source File: easy_install.py    From CTFCrackTools-V2 with GNU General Public License v3.0 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #12
Source File: easy_install.py    From coffeegrindsize with MIT License 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #13
Source File: easy_install.py    From jarvis with GNU General Public License v2.0 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #14
Source File: easy_install.py    From V1EngineeringInc-Docs with Creative Commons Attribution Share Alike 4.0 International 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #15
Source File: easy_install.py    From Hands-On-Deep-Learning-for-Games with MIT License 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #16
Source File: easy_install.py    From aws-kube-codesuite with Apache License 2.0 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #17
Source File: easy_install.py    From android_universal with MIT License 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #18
Source File: easy_install.py    From Mastering-Elasticsearch-7.0 with MIT License 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #19
Source File: easy_install.py    From python-netsurv with MIT License 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #20
Source File: easy_install.py    From python-netsurv with MIT License 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #21
Source File: easy_install.py    From jbox with MIT License 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        cfg = configparser.RawConfigParser(
            {'version': '', 'target_version': ''})
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #22
Source File: easy_install.py    From lambda-packs with MIT License 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #23
Source File: easy_install.py    From ironpython2 with Apache License 2.0 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #24
Source File: easy_install.py    From lambda-chef-node-cleanup with Apache License 2.0 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        cfg = configparser.RawConfigParser(
            {'version': '', 'target_version': ''})
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #25
Source File: janus.py    From janus with MIT License 5 votes vote down vote up
def get_endrec(file):
    pos = file.tell()
    endrec = _EndRecData(file)
    file.seek(pos)

    return endrec 
Example #26
Source File: easy_install.py    From kobo-predict with BSD 2-Clause "Simplified" License 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #27
Source File: easy_install.py    From telegram-robot-rss with Mozilla Public License 2.0 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #28
Source File: easy_install.py    From anpr with Creative Commons Attribution 4.0 International 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #29
Source File: easy_install.py    From Safejumper-for-Desktop with GNU General Public License v2.0 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close() 
Example #30
Source File: easy_install.py    From pex with Apache License 2.0 5 votes vote down vote up
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()