Python codeop.compile_command() Examples
The following are 30
code examples of codeop.compile_command().
You can vote up the ones you like or vote down the ones you don't like,
and go to the original project or source file by following the links above each example.
You may also want to check out all available functions/classes of the module
codeop
, or try the search function
.
.
Example #1
| Source File: test_codeop.py From BinderFilter with MIT License | 6 votes |
|
def assertValid(self, str, symbol='single'):
'''succeed iff str is a valid piece of code'''
if is_jython:
code = compile_command(str, "<input>", symbol)
self.assertTrue(code)
if symbol == "single":
d,r = {},{}
saved_stdout = sys.stdout
sys.stdout = cStringIO.StringIO()
try:
exec code in d
exec compile(str,"<input>","single") in r
finally:
sys.stdout = saved_stdout
elif symbol == 'eval':
ctx = {'a': 2}
d = { 'value': eval(code,ctx) }
r = { 'value': eval(str,ctx) }
self.assertEqual(unify_callables(r),unify_callables(d))
else:
expected = compile(str, "<input>", symbol, PyCF_DONT_IMPLY_DEDENT)
self.assertEqual(compile_command(str, "<input>", symbol), expected)
Example #2
| Source File: test_codeop.py From Fluid-Designer with GNU General Public License v3.0 | 6 votes |
|
def assertValid(self, str, symbol='single'):
'''succeed iff str is a valid piece of code'''
if is_jython:
code = compile_command(str, "<input>", symbol)
self.assertTrue(code)
if symbol == "single":
d,r = {},{}
saved_stdout = sys.stdout
sys.stdout = io.StringIO()
try:
exec(code, d)
exec(compile(str,"<input>","single"), r)
finally:
sys.stdout = saved_stdout
elif symbol == 'eval':
ctx = {'a': 2}
d = { 'value': eval(code,ctx) }
r = { 'value': eval(str,ctx) }
self.assertEqual(unify_callables(r),unify_callables(d))
else:
expected = compile(str, "<input>", symbol, PyCF_DONT_IMPLY_DEDENT)
self.assertEqual(compile_command(str, "<input>", symbol), expected)
Example #3
| Source File: test_codeop.py From CTFCrackTools-V2 with GNU General Public License v3.0 | 6 votes |
|
def assertValid(self, str, symbol='single'):
'''succeed iff str is a valid piece of code'''
if is_jython:
code = compile_command(str, "<input>", symbol)
self.assertTrue(code)
if symbol == "single":
d,r = {},{}
saved_stdout = sys.stdout
sys.stdout = cStringIO.StringIO()
try:
exec code in d
exec compile(str,"<input>","single") in r
finally:
sys.stdout = saved_stdout
elif symbol == 'eval':
ctx = {'a': 2}
d = { 'value': eval(code,ctx) }
r = { 'value': eval(str,ctx) }
self.assertEqual(unify_callables(r),unify_callables(d))
else:
expected = compile(str, "<input>", symbol, PyCF_DONT_IMPLY_DEDENT)
self.assertEqual(compile_command(str, "<input>", symbol), expected)
Example #4
| Source File: test_codeop.py From oss-ftp with MIT License | 6 votes |
|
def assertValid(self, str, symbol='single'):
'''succeed iff str is a valid piece of code'''
if is_jython:
code = compile_command(str, "<input>", symbol)
self.assertTrue(code)
if symbol == "single":
d,r = {},{}
saved_stdout = sys.stdout
sys.stdout = cStringIO.StringIO()
try:
exec code in d
exec compile(str,"<input>","single") in r
finally:
sys.stdout = saved_stdout
elif symbol == 'eval':
ctx = {'a': 2}
d = { 'value': eval(code,ctx) }
r = { 'value': eval(str,ctx) }
self.assertEqual(unify_callables(r),unify_callables(d))
else:
expected = compile(str, "<input>", symbol, PyCF_DONT_IMPLY_DEDENT)
self.assertEqual(compile_command(str, "<input>", symbol), expected)
Example #5
| Source File: test_codeop.py From medicare-demo with Apache License 2.0 | 6 votes |
|
def assertValid(self, str, symbol='single'):
'''succeed iff str is a valid piece of code'''
if is_jython:
code = compile_command(str, "<input>", symbol)
self.assertTrue(code)
if symbol == "single":
d,r = {},{}
saved_stdout = sys.stdout
sys.stdout = cStringIO.StringIO()
try:
exec code in d
exec compile(str,"<input>","single") in r
finally:
sys.stdout = saved_stdout
elif symbol == 'eval':
ctx = {'a': 2}
d = { 'value': eval(code,ctx) }
r = { 'value': eval(str,ctx) }
self.assertEquals(unify_callables(r),unify_callables(d))
else:
expected = compile(str, "<input>", symbol, PyCF_DONT_IMPLY_DEDENT)
self.assertEquals( compile_command(str, "<input>", symbol), expected)
Example #6
| Source File: test_codeop.py From ironpython3 with Apache License 2.0 | 6 votes |
|
def assertValid(self, str, symbol='single'):
'''succeed iff str is a valid piece of code'''
if is_jython:
code = compile_command(str, "<input>", symbol)
self.assertTrue(code)
if symbol == "single":
d,r = {},{}
saved_stdout = sys.stdout
sys.stdout = io.StringIO()
try:
exec(code, d)
exec(compile(str,"<input>","single"), r)
finally:
sys.stdout = saved_stdout
elif symbol == 'eval':
ctx = {'a': 2}
d = { 'value': eval(code,ctx) }
r = { 'value': eval(str,ctx) }
self.assertEqual(unify_callables(r),unify_callables(d))
else:
expected = compile(str, "<input>", symbol, PyCF_DONT_IMPLY_DEDENT)
self.assertEqual(compile_command(str, "<input>", symbol), expected)
Example #7
| Source File: test_codeop.py From Project-New-Reign---Nemesis-Main with GNU General Public License v3.0 | 6 votes |
|
def assertValid(self, str, symbol='single'):
'''succeed iff str is a valid piece of code'''
if is_jython:
code = compile_command(str, "<input>", symbol)
self.assertTrue(code)
if symbol == "single":
d,r = {},{}
saved_stdout = sys.stdout
sys.stdout = io.StringIO()
try:
exec(code, d)
exec(compile(str,"<input>","single"), r)
finally:
sys.stdout = saved_stdout
elif symbol == 'eval':
ctx = {'a': 2}
d = { 'value': eval(code,ctx) }
r = { 'value': eval(str,ctx) }
self.assertEqual(unify_callables(r),unify_callables(d))
else:
expected = compile(str, "<input>", symbol, PyCF_DONT_IMPLY_DEDENT)
self.assertEqual(compile_command(str, "<input>", symbol), expected)
Example #8
| Source File: test_codeop.py From gcblue with BSD 3-Clause "New" or "Revised" License | 6 votes |
|
def assertValid(self, str, symbol='single'):
'''succeed iff str is a valid piece of code'''
if is_jython:
code = compile_command(str, "<input>", symbol)
self.assertTrue(code)
if symbol == "single":
d,r = {},{}
saved_stdout = sys.stdout
sys.stdout = cStringIO.StringIO()
try:
exec code in d
exec compile(str,"<input>","single") in r
finally:
sys.stdout = saved_stdout
elif symbol == 'eval':
ctx = {'a': 2}
d = { 'value': eval(code,ctx) }
r = { 'value': eval(str,ctx) }
self.assertEqual(unify_callables(r),unify_callables(d))
else:
expected = compile(str, "<input>", symbol, PyCF_DONT_IMPLY_DEDENT)
self.assertEqual(compile_command(str, "<input>", symbol), expected)
Example #9
| Source File: test_codeop.py From ironpython2 with Apache License 2.0 | 6 votes |
|
def assertValid(self, str, symbol='single'):
'''succeed iff str is a valid piece of code'''
if is_jython:
code = compile_command(str, "<input>", symbol)
self.assertTrue(code)
if symbol == "single":
d,r = {},{}
saved_stdout = sys.stdout
sys.stdout = cStringIO.StringIO()
try:
exec code in d
exec compile(str,"<input>","single") in r
finally:
sys.stdout = saved_stdout
elif symbol == 'eval':
ctx = {'a': 2}
d = { 'value': eval(code,ctx) }
r = { 'value': eval(str,ctx) }
self.assertEqual(unify_callables(r),unify_callables(d))
else:
expected = compile(str, "<input>", symbol, PyCF_DONT_IMPLY_DEDENT)
self.assertEqual(compile_command(str, "<input>", symbol), expected)
Example #10
| Source File: test_codeop.py From CTFCrackTools with GNU General Public License v3.0 | 6 votes |
|
def assertValid(self, str, symbol='single'):
'''succeed iff str is a valid piece of code'''
if is_jython:
code = compile_command(str, "<input>", symbol)
self.assertTrue(code)
if symbol == "single":
d,r = {},{}
saved_stdout = sys.stdout
sys.stdout = cStringIO.StringIO()
try:
exec code in d
exec compile(str,"<input>","single") in r
finally:
sys.stdout = saved_stdout
elif symbol == 'eval':
ctx = {'a': 2}
d = { 'value': eval(code,ctx) }
r = { 'value': eval(str,ctx) }
self.assertEqual(unify_callables(r),unify_callables(d))
else:
expected = compile(str, "<input>", symbol, PyCF_DONT_IMPLY_DEDENT)
self.assertEqual(compile_command(str, "<input>", symbol), expected)
Example #11
| Source File: code.py From canape with GNU General Public License v3.0 | 5 votes |
|
def runsource(self, source, filename="<input>", symbol="single"):
"""Compile and run some source in the interpreter.
Arguments are as for compile_command().
One several things can happen:
1) The input is incorrect; compile_command() raised an
exception (SyntaxError or OverflowError). A syntax traceback
will be printed by calling the showsyntaxerror() method.
2) The input is incomplete, and more input is required;
compile_command() returned None. Nothing happens.
3) The input is complete; compile_command() returned a code
object. The code is executed by calling self.runcode() (which
also handles run-time exceptions, except for SystemExit).
The return value is True in case 2, False in the other cases (unless
an exception is raised). The return value can be used to
decide whether to use sys.ps1 or sys.ps2 to prompt the next
line.
"""
try:
code = self.compile(source, filename, symbol)
except (OverflowError, SyntaxError, ValueError):
# Case 1
self.showsyntaxerror(filename)
return False
if code is None:
# Case 2
return True
# Case 3
self.runcode(code)
return False
Example #12
| Source File: code.py From CTFCrackTools with GNU General Public License v3.0 | 5 votes |
|
def runsource(self, source, filename="<input>", symbol="single"):
"""Compile and run some source in the interpreter.
Arguments are as for compile_command().
One several things can happen:
1) The input is incorrect; compile_command() raised an
exception (SyntaxError or OverflowError). A syntax traceback
will be printed by calling the showsyntaxerror() method.
2) The input is incomplete, and more input is required;
compile_command() returned None. Nothing happens.
3) The input is complete; compile_command() returned a code
object. The code is executed by calling self.runcode() (which
also handles run-time exceptions, except for SystemExit).
The return value is True in case 2, False in the other cases (unless
an exception is raised). The return value can be used to
decide whether to use sys.ps1 or sys.ps2 to prompt the next
line.
"""
try:
code = self.compile(source, filename, symbol)
except (OverflowError, SyntaxError, ValueError):
# Case 1
self.showsyntaxerror(filename)
return False
if code is None:
# Case 2
return True
# Case 3
self.runcode(code)
return False
Example #13
| Source File: test_codeop.py From medicare-demo with Apache License 2.0 | 5 votes |
|
def assertIncomplete(self, str, symbol='single'):
'''succeed iff str is the start of a valid piece of code'''
self.assertEquals( compile_command(str, symbol=symbol), None)
Example #14
| Source File: code.py From CTFCrackTools with GNU General Public License v3.0 | 5 votes |
|
def runsource(self, source, filename="<input>", symbol="single"):
"""Compile and run some source in the interpreter.
Arguments are as for compile_command().
One several things can happen:
1) The input is incorrect; compile_command() raised an
exception (SyntaxError or OverflowError). A syntax traceback
will be printed by calling the showsyntaxerror() method.
2) The input is incomplete, and more input is required;
compile_command() returned None. Nothing happens.
3) The input is complete; compile_command() returned a code
object. The code is executed by calling self.runcode() (which
also handles run-time exceptions, except for SystemExit).
The return value is True in case 2, False in the other cases (unless
an exception is raised). The return value can be used to
decide whether to use sys.ps1 or sys.ps2 to prompt the next
line.
"""
try:
code = self.compile(source, filename, symbol)
except (OverflowError, SyntaxError, ValueError):
# Case 1
self.showsyntaxerror(filename)
return False
if code is None:
# Case 2
return True
# Case 3
self.runcode(code)
return False
Example #15
| Source File: test_codeop.py From CTFCrackTools with GNU General Public License v3.0 | 5 votes |
|
def assertIncomplete(self, str, symbol='single'):
'''succeed iff str is the start of a valid piece of code'''
self.assertEqual(compile_command(str, symbol=symbol), None)
Example #16
| Source File: code.py From android_universal with MIT License | 5 votes |
|
def runsource(self, source, filename="<input>", symbol="single"):
"""Compile and run some source in the interpreter.
Arguments are as for compile_command().
One several things can happen:
1) The input is incorrect; compile_command() raised an
exception (SyntaxError or OverflowError). A syntax traceback
will be printed by calling the showsyntaxerror() method.
2) The input is incomplete, and more input is required;
compile_command() returned None. Nothing happens.
3) The input is complete; compile_command() returned a code
object. The code is executed by calling self.runcode() (which
also handles run-time exceptions, except for SystemExit).
The return value is True in case 2, False in the other cases (unless
an exception is raised). The return value can be used to
decide whether to use sys.ps1 or sys.ps2 to prompt the next
line.
"""
try:
code = self.compile(source, filename, symbol)
except (OverflowError, SyntaxError, ValueError):
# Case 1
self.showsyntaxerror(filename)
return False
if code is None:
# Case 2
return True
# Case 3
self.runcode(code)
return False
Example #17
| Source File: source.py From py with MIT License | 5 votes |
|
def getstatementrange_old(lineno, source, assertion=False):
""" return (start, end) tuple which spans the minimal
statement region which containing the given lineno.
raise an IndexError if no such statementrange can be found.
"""
# XXX this logic is only used on python2.4 and below
# 1. find the start of the statement
from codeop import compile_command
for start in range(lineno, -1, -1):
if assertion:
line = source.lines[start]
# the following lines are not fully tested, change with care
if 'super' in line and 'self' in line and '__init__' in line:
raise IndexError("likely a subclass")
if "assert" not in line and "raise" not in line:
continue
trylines = source.lines[start:lineno+1]
# quick hack to prepare parsing an indented line with
# compile_command() (which errors on "return" outside defs)
trylines.insert(0, 'def xxx():')
trysource = '\n '.join(trylines)
# ^ space here
try:
compile_command(trysource)
except (SyntaxError, OverflowError, ValueError):
continue
# 2. find the end of the statement
for end in range(lineno+1, len(source)+1):
trysource = source[start:end]
if trysource.isparseable():
return start, end
raise SyntaxError("no valid source range around line %d " % (lineno,))
Example #18
| Source File: code.py From unity-python with MIT License | 5 votes |
|
def runsource(self, source, filename="<input>", symbol="single"):
"""Compile and run some source in the interpreter.
Arguments are as for compile_command().
One several things can happen:
1) The input is incorrect; compile_command() raised an
exception (SyntaxError or OverflowError). A syntax traceback
will be printed by calling the showsyntaxerror() method.
2) The input is incomplete, and more input is required;
compile_command() returned None. Nothing happens.
3) The input is complete; compile_command() returned a code
object. The code is executed by calling self.runcode() (which
also handles run-time exceptions, except for SystemExit).
The return value is True in case 2, False in the other cases (unless
an exception is raised). The return value can be used to
decide whether to use sys.ps1 or sys.ps2 to prompt the next
line.
"""
try:
code = self.compile(source, filename, symbol)
except (OverflowError, SyntaxError, ValueError):
# Case 1
self.showsyntaxerror(filename)
return False
if code is None:
# Case 2
return True
# Case 3
self.runcode(code)
return False
Example #19
| Source File: code.py From PokemonGo-DesktopMap with MIT License | 5 votes |
|
def runsource(self, source, filename="<input>", symbol="single"):
"""Compile and run some source in the interpreter.
Arguments are as for compile_command().
One several things can happen:
1) The input is incorrect; compile_command() raised an
exception (SyntaxError or OverflowError). A syntax traceback
will be printed by calling the showsyntaxerror() method.
2) The input is incomplete, and more input is required;
compile_command() returned None. Nothing happens.
3) The input is complete; compile_command() returned a code
object. The code is executed by calling self.runcode() (which
also handles run-time exceptions, except for SystemExit).
The return value is True in case 2, False in the other cases (unless
an exception is raised). The return value can be used to
decide whether to use sys.ps1 or sys.ps2 to prompt the next
line.
"""
try:
code = self.compile(source, filename, symbol)
except (OverflowError, SyntaxError, ValueError):
# Case 1
self.showsyntaxerror(filename)
return False
if code is None:
# Case 2
return True
# Case 3
self.runcode(code)
return False
Example #20
| Source File: code.py From CTFCrackTools-V2 with GNU General Public License v3.0 | 5 votes |
|
def runsource(self, source, filename="<input>", symbol="single"):
"""Compile and run some source in the interpreter.
Arguments are as for compile_command().
One several things can happen:
1) The input is incorrect; compile_command() raised an
exception (SyntaxError or OverflowError). A syntax traceback
will be printed by calling the showsyntaxerror() method.
2) The input is incomplete, and more input is required;
compile_command() returned None. Nothing happens.
3) The input is complete; compile_command() returned a code
object. The code is executed by calling self.runcode() (which
also handles run-time exceptions, except for SystemExit).
The return value is True in case 2, False in the other cases (unless
an exception is raised). The return value can be used to
decide whether to use sys.ps1 or sys.ps2 to prompt the next
line.
"""
try:
code = self.compile(source, filename, symbol)
except (OverflowError, SyntaxError, ValueError):
# Case 1
self.showsyntaxerror(filename)
return False
if code is None:
# Case 2
return True
# Case 3
self.runcode(code)
return False
Example #21
| Source File: test_codeop.py From medicare-demo with Apache License 2.0 | 5 votes |
|
def test_filename(self):
self.assertEquals(compile_command("a = 1\n", "abc").co_filename,
compile("a = 1\n", "abc", 'single').co_filename)
self.assertNotEquals(compile_command("a = 1\n", "abc").co_filename,
compile("a = 1\n", "def", 'single').co_filename)
Example #22
| Source File: test_codeop.py From medicare-demo with Apache License 2.0 | 5 votes |
|
def assertInvalid(self, str, symbol='single', is_syntax=1):
'''succeed iff str is the start of an invalid piece of code'''
try:
compile_command(str,symbol=symbol)
self.fail("No exception thrown for invalid code")
except SyntaxError:
self.assertTrue(is_syntax)
except OverflowError:
self.assertTrue(not is_syntax)
Example #23
| Source File: code.py From CTFCrackTools-V2 with GNU General Public License v3.0 | 5 votes |
|
def runsource(self, source, filename="<input>", symbol="single"):
"""Compile and run some source in the interpreter.
Arguments are as for compile_command().
One several things can happen:
1) The input is incorrect; compile_command() raised an
exception (SyntaxError or OverflowError). A syntax traceback
will be printed by calling the showsyntaxerror() method.
2) The input is incomplete, and more input is required;
compile_command() returned None. Nothing happens.
3) The input is complete; compile_command() returned a code
object. The code is executed by calling self.runcode() (which
also handles run-time exceptions, except for SystemExit).
The return value is True in case 2, False in the other cases (unless
an exception is raised). The return value can be used to
decide whether to use sys.ps1 or sys.ps2 to prompt the next
line.
"""
try:
code = self.compile(source, filename, symbol)
except (OverflowError, SyntaxError, ValueError):
# Case 1
self.showsyntaxerror(filename)
return False
if code is None:
# Case 2
return True
# Case 3
self.runcode(code)
return False
Example #24
| Source File: code.py From medicare-demo with Apache License 2.0 | 5 votes |
|
def runsource(self, source, filename="<input>", symbol="single"):
"""Compile and run some source in the interpreter.
Arguments are as for compile_command().
One several things can happen:
1) The input is incorrect; compile_command() raised an
exception (SyntaxError or OverflowError). A syntax traceback
will be printed by calling the showsyntaxerror() method.
2) The input is incomplete, and more input is required;
compile_command() returned None. Nothing happens.
3) The input is complete; compile_command() returned a code
object. The code is executed by calling self.runcode() (which
also handles run-time exceptions, except for SystemExit).
The return value is True in case 2, False in the other cases (unless
an exception is raised). The return value can be used to
decide whether to use sys.ps1 or sys.ps2 to prompt the next
line.
"""
try:
code = self.compile(source, filename, symbol)
except (OverflowError, SyntaxError, ValueError):
# Case 1
self.showsyntaxerror(filename)
return False
if code is None:
# Case 2
return True
# Case 3
self.runcode(code)
return False
Example #25
| Source File: test_codeop.py From Project-New-Reign---Nemesis-Main with GNU General Public License v3.0 | 5 votes |
|
def test_filename(self):
self.assertEqual(compile_command("a = 1\n", "abc").co_filename,
compile("a = 1\n", "abc", 'single').co_filename)
self.assertNotEqual(compile_command("a = 1\n", "abc").co_filename,
compile("a = 1\n", "def", 'single').co_filename)
Example #26
| Source File: test_codeop.py From Project-New-Reign---Nemesis-Main with GNU General Public License v3.0 | 5 votes |
|
def assertInvalid(self, str, symbol='single', is_syntax=1):
'''succeed iff str is the start of an invalid piece of code'''
try:
compile_command(str,symbol=symbol)
self.fail("No exception raised for invalid code")
except SyntaxError:
self.assertTrue(is_syntax)
except OverflowError:
self.assertTrue(not is_syntax)
Example #27
| Source File: test_codeop.py From Project-New-Reign---Nemesis-Main with GNU General Public License v3.0 | 5 votes |
|
def assertIncomplete(self, str, symbol='single'):
'''succeed iff str is the start of a valid piece of code'''
self.assertEqual(compile_command(str, symbol=symbol), None)
Example #28
| Source File: code.py From Project-New-Reign---Nemesis-Main with GNU General Public License v3.0 | 5 votes |
|
def runsource(self, source, filename="<input>", symbol="single"):
"""Compile and run some source in the interpreter.
Arguments are as for compile_command().
One several things can happen:
1) The input is incorrect; compile_command() raised an
exception (SyntaxError or OverflowError). A syntax traceback
will be printed by calling the showsyntaxerror() method.
2) The input is incomplete, and more input is required;
compile_command() returned None. Nothing happens.
3) The input is complete; compile_command() returned a code
object. The code is executed by calling self.runcode() (which
also handles run-time exceptions, except for SystemExit).
The return value is True in case 2, False in the other cases (unless
an exception is raised). The return value can be used to
decide whether to use sys.ps1 or sys.ps2 to prompt the next
line.
"""
try:
code = self.compile(source, filename, symbol)
except (OverflowError, SyntaxError, ValueError):
# Case 1
self.showsyntaxerror(filename)
return False
if code is None:
# Case 2
return True
# Case 3
self.runcode(code)
return False
Example #29
| Source File: code.py From Splunking-Crime with GNU Affero General Public License v3.0 | 5 votes |
|
def runsource(self, source, filename="<input>", symbol="single"):
"""Compile and run some source in the interpreter.
Arguments are as for compile_command().
One several things can happen:
1) The input is incorrect; compile_command() raised an
exception (SyntaxError or OverflowError). A syntax traceback
will be printed by calling the showsyntaxerror() method.
2) The input is incomplete, and more input is required;
compile_command() returned None. Nothing happens.
3) The input is complete; compile_command() returned a code
object. The code is executed by calling self.runcode() (which
also handles run-time exceptions, except for SystemExit).
The return value is True in case 2, False in the other cases (unless
an exception is raised). The return value can be used to
decide whether to use sys.ps1 or sys.ps2 to prompt the next
line.
"""
try:
code = self.compile(source, filename, symbol)
except (OverflowError, SyntaxError, ValueError):
# Case 1
self.showsyntaxerror(filename)
return False
if code is None:
# Case 2
return True
# Case 3
self.runcode(code)
return False
Example #30
| Source File: code.py From datafari with Apache License 2.0 | 5 votes |
|
def runsource(self, source, filename="<input>", symbol="single"):
"""Compile and run some source in the interpreter.
Arguments are as for compile_command().
One several things can happen:
1) The input is incorrect; compile_command() raised an
exception (SyntaxError or OverflowError). A syntax traceback
will be printed by calling the showsyntaxerror() method.
2) The input is incomplete, and more input is required;
compile_command() returned None. Nothing happens.
3) The input is complete; compile_command() returned a code
object. The code is executed by calling self.runcode() (which
also handles run-time exceptions, except for SystemExit).
The return value is True in case 2, False in the other cases (unless
an exception is raised). The return value can be used to
decide whether to use sys.ps1 or sys.ps2 to prompt the next
line.
"""
try:
code = self.compile(source, filename, symbol)
except (OverflowError, SyntaxError, ValueError):
# Case 1
self.showsyntaxerror(filename)
return False
if code is None:
# Case 2
return True
# Case 3
self.runcode(code)
return False
