Python ssl.OP_NO_SSLv3() Examples

def _create_ssl_ctx(self, sslp):
        if isinstance(sslp, ssl.SSLContext):
            return sslp
        ca = sslp.get('ca')
        capath = sslp.get('capath')
        hasnoca = ca is None and capath is None
        ctx = ssl.create_default_context(cafile=ca, capath=capath)
        ctx.check_hostname = not hasnoca and sslp.get('check_hostname', True)
        ctx.verify_mode = ssl.CERT_NONE if hasnoca else ssl.CERT_REQUIRED
        if 'cert' in sslp:
            ctx.load_cert_chain(sslp['cert'], keyfile=sslp.get('key'))
        if 'cipher' in sslp:
            ctx.set_ciphers(sslp['cipher'])
        ctx.options |= ssl.OP_NO_SSLv2
        ctx.options |= ssl.OP_NO_SSLv3
        return ctx 

def _create_ssl_ctx(self, sslp):
        if isinstance(sslp, ssl.SSLContext):
            return sslp
        ca = sslp.get('ca')
        capath = sslp.get('capath')
        hasnoca = ca is None and capath is None
        ctx = ssl.create_default_context(cafile=ca, capath=capath)
        ctx.check_hostname = not hasnoca and sslp.get('check_hostname', True)
        ctx.verify_mode = ssl.CERT_NONE if hasnoca else ssl.CERT_REQUIRED
        if 'cert' in sslp:
            ctx.load_cert_chain(sslp['cert'], keyfile=sslp.get('key'))
        if 'cipher' in sslp:
            ctx.set_ciphers(sslp['cipher'])
        ctx.options |= ssl.OP_NO_SSLv2
        ctx.options |= ssl.OP_NO_SSLv3
        return ctx 

def _create_ssl_ctx(self, sslp):
        if isinstance(sslp, ssl.SSLContext):
            return sslp
        ca = sslp.get('ca')
        capath = sslp.get('capath')
        hasnoca = ca is None and capath is None
        ctx = ssl.create_default_context(cafile=ca, capath=capath)
        ctx.check_hostname = not hasnoca and sslp.get('check_hostname', True)
        ctx.verify_mode = ssl.CERT_NONE if hasnoca else ssl.CERT_REQUIRED
        if 'cert' in sslp:
            ctx.load_cert_chain(sslp['cert'], keyfile=sslp.get('key'))
        if 'cipher' in sslp:
            ctx.set_ciphers(sslp['cipher'])
        ctx.options |= ssl.OP_NO_SSLv2
        ctx.options |= ssl.OP_NO_SSLv3
        return ctx 

def _create_ssl_ctx(self, sslp):
        if isinstance(sslp, ssl.SSLContext):
            return sslp
        ca = sslp.get('ca')
        capath = sslp.get('capath')
        hasnoca = ca is None and capath is None
        ctx = ssl.create_default_context(cafile=ca, capath=capath)
        ctx.check_hostname = not hasnoca and sslp.get('check_hostname', True)
        ctx.verify_mode = ssl.CERT_NONE if hasnoca else ssl.CERT_REQUIRED
        if 'cert' in sslp:
            ctx.load_cert_chain(sslp['cert'], keyfile=sslp.get('key'))
        if 'cipher' in sslp:
            ctx.set_ciphers(sslp['cipher'])
        ctx.options |= ssl.OP_NO_SSLv2
        ctx.options |= ssl.OP_NO_SSLv3
        return ctx 

def _create_ssl_ctx(self, sslp):
        if isinstance(sslp, ssl.SSLContext):
            return sslp
        ca = sslp.get('ca')
        capath = sslp.get('capath')
        hasnoca = ca is None and capath is None
        ctx = ssl.create_default_context(cafile=ca, capath=capath)
        ctx.check_hostname = not hasnoca and sslp.get('check_hostname', True)
        ctx.verify_mode = ssl.CERT_NONE if hasnoca else ssl.CERT_REQUIRED
        if 'cert' in sslp:
            ctx.load_cert_chain(sslp['cert'], keyfile=sslp.get('key'))
        if 'cipher' in sslp:
            ctx.set_ciphers(sslp['cipher'])
        ctx.options |= ssl.OP_NO_SSLv2
        ctx.options |= ssl.OP_NO_SSLv3
        return ctx 

def __init__(self, *args, **kwargs):
        self.ssl_context = kwargs.pop('ssl_context', None)
        self.cipherSuite = kwargs.pop('cipherSuite', None)
        self.source_address = kwargs.pop('source_address', None)

        if self.source_address:
            if isinstance(self.source_address, str):
                self.source_address = (self.source_address, 0)

            if not isinstance(self.source_address, tuple):
                raise TypeError(
                    "source_address must be IP address string or (ip, port) tuple"
                )

        if not self.ssl_context:
            self.ssl_context = ssl.create_default_context(ssl.Purpose.SERVER_AUTH)
            self.ssl_context.set_ciphers(self.cipherSuite)
            self.ssl_context.set_ecdh_curve('prime256v1')
            self.ssl_context.options |= (ssl.OP_NO_SSLv2 | ssl.OP_NO_SSLv3 | ssl.OP_NO_TLSv1 | ssl.OP_NO_TLSv1_1)

        super(CipherSuiteAdapter, self).__init__(**kwargs)

    # ------------------------------------------------------------------------------- # 

def _create_ssl_ctx(self, sslp):
        if isinstance(sslp, ssl.SSLContext):
            return sslp
        ca = sslp.get('ca')
        capath = sslp.get('capath')
        hasnoca = ca is None and capath is None
        ctx = ssl.create_default_context(cafile=ca, capath=capath)
        ctx.check_hostname = not hasnoca and sslp.get('check_hostname', True)
        ctx.verify_mode = ssl.CERT_NONE if hasnoca else ssl.CERT_REQUIRED
        if 'cert' in sslp:
            ctx.load_cert_chain(sslp['cert'], keyfile=sslp.get('key'))
        if 'cipher' in sslp:
            ctx.set_ciphers(sslp['cipher'])
        ctx.options |= ssl.OP_NO_SSLv2
        ctx.options |= ssl.OP_NO_SSLv3
        return ctx 

def _create_transport_context(server_side, server_hostname):
    if server_side:
        raise ValueError('Server side SSL needs a valid SSLContext')

    # Client side may pass ssl=True to use a default
    # context; in that case the sslcontext passed is None.
    # The default is secure for client connections.
    if hasattr(ssl, 'create_default_context'):
        # Python 3.4+: use up-to-date strong settings.
        sslcontext = ssl.create_default_context()
        if not server_hostname:
            sslcontext.check_hostname = False
    else:
        # Fallback for Python 3.3.
        sslcontext = ssl.SSLContext(ssl.PROTOCOL_SSLv23)
        sslcontext.options |= ssl.OP_NO_SSLv2
        sslcontext.options |= ssl.OP_NO_SSLv3
        sslcontext.set_default_verify_paths()
        sslcontext.verify_mode = ssl.CERT_REQUIRED
    return sslcontext 

def _init_context(self, ssl_version):
        if self._has_ssl_context:
            self._context = ssl.SSLContext(ssl_version)
            if self._context.protocol == ssl.PROTOCOL_SSLv23:
                self._context.options |= ssl.OP_NO_SSLv2
                self._context.options |= ssl.OP_NO_SSLv3
        else:
            self._context = None
            self._ssl_version = ssl_version 

def get_http2_ssl_context():
    """
    This function creates an SSLContext object that is suitably configured for
    HTTP/2. If you're working with Python TLS directly, you'll want to do the
    exact same setup as this function does.
    """
    # Get the basic context from the standard library.
    ctx = ssl.create_default_context(purpose=ssl.Purpose.CLIENT_AUTH)

    # RFC 7540 Section 9.2: Implementations of HTTP/2 MUST use TLS version 1.2
    # or higher. Disable TLS 1.1 and lower.
    ctx.options |= (
        ssl.OP_NO_SSLv2 | ssl.OP_NO_SSLv3 | ssl.OP_NO_TLSv1 | ssl.OP_NO_TLSv1_1
    )

    # RFC 7540 Section 9.2.1: A deployment of HTTP/2 over TLS 1.2 MUST disable
    # compression.
    ctx.options |= ssl.OP_NO_COMPRESSION

    # RFC 7540 Section 9.2.2: "deployments of HTTP/2 that use TLS 1.2 MUST
    # support TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256". In practice, the
    # blocklist defined in this section allows only the AES GCM and ChaCha20
    # cipher suites with ephemeral key negotiation.
    ctx.set_ciphers("ECDHE+AESGCM:ECDHE+CHACHA20:DHE+AESGCM:DHE+CHACHA20")

    # We want to negotiate using NPN and ALPN. ALPN is mandatory, but NPN may
    # be absent, so allow that. This setup allows for negotiation of HTTP/1.1.
    ctx.set_alpn_protocols(["h2", "http/1.1"])

    try:
        ctx.set_npn_protocols(["h2", "http/1.1"])
    except NotImplementedError:
        pass

    return ctx 

def _init_context(self, ssl_version):
        if self._has_ssl_context:
            self._context = ssl.SSLContext(ssl_version)
            if self._context.protocol == ssl.PROTOCOL_SSLv23:
                self._context.options |= ssl.OP_NO_SSLv2
                self._context.options |= ssl.OP_NO_SSLv3
        else:
            self._context = None
            self._ssl_version = ssl_version 

def get_http2_ssl_context():
    """
    This function creates an SSLContext object that is suitably configured for
    HTTP/2. If you're working with Python TLS directly, you'll want to do the
    exact same setup as this function does.
    """
    # Get the basic context from the standard library.
    ctx = ssl.create_default_context(purpose=ssl.Purpose.SERVER_AUTH)

    # RFC 7540 Section 9.2: Implementations of HTTP/2 MUST use TLS version 1.2
    # or higher. Disable TLS 1.1 and lower.
    ctx.options |= (
        ssl.OP_NO_SSLv2 | ssl.OP_NO_SSLv3 | ssl.OP_NO_TLSv1 | ssl.OP_NO_TLSv1_1
    )

    # RFC 7540 Section 9.2.1: A deployment of HTTP/2 over TLS 1.2 MUST disable
    # compression.
    ctx.options |= ssl.OP_NO_COMPRESSION

    # RFC 7540 Section 9.2.2: "deployments of HTTP/2 that use TLS 1.2 MUST
    # support TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256". In practice, the
    # blocklist defined in this section allows only the AES GCM and ChaCha20
    # cipher suites with ephemeral key negotiation.
    ctx.set_ciphers("ECDHE+AESGCM:ECDHE+CHACHA20:DHE+AESGCM:DHE+CHACHA20")

    # We want to negotiate using NPN and ALPN. ALPN is mandatory, but NPN may
    # be absent, so allow that. This setup allows for negotiation of HTTP/1.1.
    ctx.set_alpn_protocols(["h2", "http/1.1"])

    try:
        ctx.set_npn_protocols(["h2", "http/1.1"])
    except NotImplementedError:
        pass

    return ctx 

def check_default_password(cls, router: BaseIndustrialRouter, semaphore=Semaphore()):
        """
        Method for checking credentials on Sierra Wireless Routers.

        :param router: :class:`aztarna.industrialrouters.scanner.BaseIndustrialRouter` router to check.
        :param semaphore: Asyncio semaphore for limiting concurrency level.
        """
        url = '{}://{}:{}/xml/Connect.xml'.format(router.protocol, router.address, router.port)
        headers = {'Accept': 'application/xml, text/xml, */*; q=0.01',
                   'Accept-Encoding': 'gzip, deflate',
                   'Content-Type': 'text/xml',
                   'X-Requested-With': 'XMLHttpRequest'}
        context = ssl.create_default_context()
        context.check_hostname = False
        context.verify_mode = ssl.CERT_NONE
        context.options &= ~ssl.OP_NO_SSLv3
        context.set_ciphers('HIGH:!DH:!aNULL')
        async with semaphore:
            async with aiohttp.ClientSession(timeout=ClientTimeout(20), headers=headers) as client:
                try:
                    for user, password in cls.default_credentials:
                        payload = '''<request xmlns="urn:acemanager">
<connect>
<login>{}</login>
<password><![CDATA[{}]]></password>
</connect>
</request>
                    '''.format(user, password)
                        logger.info('[+] Connecting to {}'.format(router.address))
                        async with client.post(url, data=bytes(payload, 'utf-8'), ssl=context) as response:
                            router.alive = True
                            content = str(await response.content.read())
                            if cls.failed_message not in content:
                                router.valid_credentials.append((user, password))
                except Exception:
                    router.alive = False
                    logger.warning('[-] Connection to {} failed'.format(router.address)) 

def check_default_password(cls, router: BaseIndustrialRouter, semaphore=Semaphore()):
        """
        Method for checking for default passwords on Moxa Routers.

        :param router: Input router object to check the credentials for.
        :param semaphore: Asyncio semaphore for limiting the concurrency leve.
        """
        uri = '{}://{}:{}/{}'.format(router.protocol, router.address, router.port, cls.url_path)
        context = ssl.create_default_context()
        context.check_hostname = False
        context.verify_mode = ssl.CERT_NONE
        context.options &= ~ssl.OP_NO_SSLv3
        context.set_ciphers('HIGH:!DH:!aNULL')
        async with semaphore:
            async with aiohttp.ClientSession(timeout=ClientTimeout(20)) as client:
                try:
                    logger.info('[+] Connecting to router at {}'.format(router.address))
                    async with client.request('GET', uri, ssl=context) as response:
                        router.alive = True
                        content = str(await response.content.read())
                        if cls.valid_login_text_moxahttp_2_2 in content or cls.valid_login_text_moxahttp_1_0 in content:
                            router.valid_credentials.append(('admin', 'no password'))
                        else:
                            if response.headers.get('Server') == 'MoxaHttp/1.0':
                                await cls.check_password_moxahttp_1_0(client, context, content, router)
                            elif response.headers.get('Server') == 'MoxaHttp/2.2':
                                await cls.check_password_moxahttp_2_2(client, context, content, router)
                except:
                    logger.warning('[-] Connection to {} failed'.format(router.address)) 

def check_is_router(cls, address: str, port: int, semaphore=Semaphore()) -> BaseIndustrialRouter:
        """
        Check if a certain router is an industrial router, given the headers defined at class level.

        :param address: IP address of the router to check.
        :param port: Port of the web interface of the device to check.
        :param semaphore: Asyncio semaphore to be used for concurrency limitation.
        :return: A :class:`aztarna.industrialrouters.scanner.BaseIndustrialRouter` object if the checked device is a router.
                None otherwise.
        """
        context = ssl.create_default_context()
        context.check_hostname = False
        context.verify_mode = ssl.CERT_NONE
        context.options &= ~ssl.OP_NO_SSLv3
        async with semaphore:
            async with aiohttp.ClientSession(timeout=ClientTimeout(2)) as client:
                uri = 'http://{}:{}'.format(address, port)
                print('[+] Connecting to {}'.format(address))
                async with client.get(uri, ssl=context) as response:
                    for field, values in cls.possible_headers:
                        if response.headers.get(field) in values:
                            router = cls.router_cls()
                            router.address = address
                            router.port = port
                            return router
                        else:
                            return None 

def test_create_ssl_context() -> None:
    path = os.path.join(os.path.dirname(__file__), "assets/config_ssl.py")
    config = Config.from_pyfile(path)
    context = config.create_ssl_context()
    assert context.options & (
        ssl.OP_NO_SSLv2
        | ssl.OP_NO_SSLv3
        | ssl.OP_NO_TLSv1
        | ssl.OP_NO_TLSv1_1
        | ssl.OP_NO_COMPRESSION
    ) 

def send_stats(version, uniqid, runtime):
    #Because this is run as a subprocess we need to start logging again
    logger_send_stats = setup_logging(logfilepath="logs/send_stats.log",loggername="send_stats")

    destination="https://statscollector.rpisurv.net"

    #SSL options
    context = ssl.create_default_context(purpose=ssl.Purpose.SERVER_AUTH, cafile="core/util/statscollector.rpisurv.net.pem")
    #Force TLS higher then 1.1
    context.options |= ssl.OP_NO_SSLv2
    context.options |= ssl.OP_NO_SSLv3
    context.options |= ssl.OP_NO_TLSv1
    context.options |= ssl.OP_NO_TLSv1_1
    #Normally this has been set by ssl.Purpose.SERVER_AUTH but for safety in future explicitly set CERT_REQUIRED
    context.verify_mode = ssl.CERT_REQUIRED
    httpshandler = urllib2.HTTPSHandler(context=context)

    opener = urllib2.build_opener(httpshandler)
    opener.addheaders=[
        ('User-Agent', uniqid),
        ('Pragma', 'no-cache'),
        ('Cache-Control', 'no-cache')
    ]
    #Extra info will be send via cookie headers
    #opener.addheaders.append(('Cookie', 'runtime='+ runtime + ';reservedkey=reservedvalue'))
    opener.addheaders.append(('Cookie', 'runtime='+ runtime + ';version='+ str(version)  ))

    urllib2.install_opener(opener)

    #f = opener.open("http://httpbin.org/cookies")
    logger_send_stats.debug("Start sending uniqid " + uniqid + ", runtime " + runtime + ", version " + str(version) + " to " + destination + " for updating stats rpisurv community")
    try:
        response = opener.open(destination, timeout=20)
    except urllib2.HTTPError, e:
        logger_send_stats.error("There was an error connecting to the statistics server at " + destination + ". Failed with code " + str(e.code)) 

def create_urllib3_context(ssl_version=None, cert_reqs=None,
                           options=None, ciphers=None):
    """All arguments have the same meaning as ``ssl_wrap_socket``.

    By default, this function does a lot of the same work that
    ``ssl.create_default_context`` does on Python 3.4+. It:

    - Disables SSLv2, SSLv3, and compression
    - Sets a restricted set of server ciphers

    If you wish to enable SSLv3, you can do::

        from pip._vendor.urllib3.util import ssl_
        context = ssl_.create_urllib3_context()
        context.options &= ~ssl_.OP_NO_SSLv3

    You can do the same to enable compression (substituting ``COMPRESSION``
    for ``SSLv3`` in the last line above).

    :param ssl_version:
        The desired protocol version to use. This will default to
        PROTOCOL_SSLv23 which will negotiate the highest protocol that both
        the server and your installation of OpenSSL support.
    :param cert_reqs:
        Whether to require the certificate verification. This defaults to
        ``ssl.CERT_REQUIRED``.
    :param options:
        Specific OpenSSL options. These default to ``ssl.OP_NO_SSLv2``,
        ``ssl.OP_NO_SSLv3``, ``ssl.OP_NO_COMPRESSION``.
    :param ciphers:
        Which cipher suites to allow the server to select.
    :returns:
        Constructed SSLContext object with specified options
    :rtype: SSLContext
    """
    context = SSLContext(ssl_version or ssl.PROTOCOL_SSLv23)

    # Setting the default here, as we may have no ssl module on import
    cert_reqs = ssl.CERT_REQUIRED if cert_reqs is None else cert_reqs

    if options is None:
        options = 0
        # SSLv2 is easily broken and is considered harmful and dangerous
        options |= OP_NO_SSLv2
        # SSLv3 has several problems and is now dangerous
        options |= OP_NO_SSLv3
        # Disable compression to prevent CRIME attacks for OpenSSL 1.0+
        # (issue #309)
        options |= OP_NO_COMPRESSION

    context.options |= options

    if getattr(context, 'supports_set_ciphers', True):  # Platform-specific: Python 2.6
        context.set_ciphers(ciphers or DEFAULT_CIPHERS)

    context.verify_mode = cert_reqs
    if getattr(context, 'check_hostname', None) is not None:  # Platform-specific: Python 3.2
        # We do our own verification, including fingerprints and alternative
        # hostnames. So disable it here
        context.check_hostname = False
    return context 

def create_urllib3_context(ssl_version=None, cert_reqs=None,
                           options=None, ciphers=None):
    """All arguments have the same meaning as ``ssl_wrap_socket``.

    By default, this function does a lot of the same work that
    ``ssl.create_default_context`` does on Python 3.4+. It:

    - Disables SSLv2, SSLv3, and compression
    - Sets a restricted set of server ciphers

    If you wish to enable SSLv3, you can do::

        from pip._vendor.urllib3.util import ssl_
        context = ssl_.create_urllib3_context()
        context.options &= ~ssl_.OP_NO_SSLv3

    You can do the same to enable compression (substituting ``COMPRESSION``
    for ``SSLv3`` in the last line above).

    :param ssl_version:
        The desired protocol version to use. This will default to
        PROTOCOL_SSLv23 which will negotiate the highest protocol that both
        the server and your installation of OpenSSL support.
    :param cert_reqs:
        Whether to require the certificate verification. This defaults to
        ``ssl.CERT_REQUIRED``.
    :param options:
        Specific OpenSSL options. These default to ``ssl.OP_NO_SSLv2``,
        ``ssl.OP_NO_SSLv3``, ``ssl.OP_NO_COMPRESSION``.
    :param ciphers:
        Which cipher suites to allow the server to select.
    :returns:
        Constructed SSLContext object with specified options
    :rtype: SSLContext
    """
    context = SSLContext(ssl_version or ssl.PROTOCOL_SSLv23)

    context.set_ciphers(ciphers or DEFAULT_CIPHERS)

    # Setting the default here, as we may have no ssl module on import
    cert_reqs = ssl.CERT_REQUIRED if cert_reqs is None else cert_reqs

    if options is None:
        options = 0
        # SSLv2 is easily broken and is considered harmful and dangerous
        options |= OP_NO_SSLv2
        # SSLv3 has several problems and is now dangerous
        options |= OP_NO_SSLv3
        # Disable compression to prevent CRIME attacks for OpenSSL 1.0+
        # (issue #309)
        options |= OP_NO_COMPRESSION

    context.options |= options

    context.verify_mode = cert_reqs
    if getattr(context, 'check_hostname', None) is not None:  # Platform-specific: Python 3.2
        # We do our own verification, including fingerprints and alternative
        # hostnames. So disable it here
        context.check_hostname = False
    return context 

def create_urllib3_context(ssl_version=None, cert_reqs=None,
                           options=None, ciphers=None):
    """All arguments have the same meaning as ``ssl_wrap_socket``.

    By default, this function does a lot of the same work that
    ``ssl.create_default_context`` does on Python 3.4+. It:

    - Disables SSLv2, SSLv3, and compression
    - Sets a restricted set of server ciphers

    If you wish to enable SSLv3, you can do::

        from urllib3.util import ssl_
        context = ssl_.create_urllib3_context()
        context.options &= ~ssl_.OP_NO_SSLv3

    You can do the same to enable compression (substituting ``COMPRESSION``
    for ``SSLv3`` in the last line above).

    :param ssl_version:
        The desired protocol version to use. This will default to
        PROTOCOL_SSLv23 which will negotiate the highest protocol that both
        the server and your installation of OpenSSL support.
    :param cert_reqs:
        Whether to require the certificate verification. This defaults to
        ``ssl.CERT_REQUIRED``.
    :param options:
        Specific OpenSSL options. These default to ``ssl.OP_NO_SSLv2``,
        ``ssl.OP_NO_SSLv3``, ``ssl.OP_NO_COMPRESSION``.
    :param ciphers:
        Which cipher suites to allow the server to select.
    :returns:
        Constructed SSLContext object with specified options
    :rtype: SSLContext
    """
    context = SSLContext(ssl_version or ssl.PROTOCOL_SSLv23)

    # Setting the default here, as we may have no ssl module on import
    cert_reqs = ssl.CERT_REQUIRED if cert_reqs is None else cert_reqs

    if options is None:
        options = 0
        # SSLv2 is easily broken and is considered harmful and dangerous
        options |= OP_NO_SSLv2
        # SSLv3 has several problems and is now dangerous
        options |= OP_NO_SSLv3
        # Disable compression to prevent CRIME attacks for OpenSSL 1.0+
        # (issue #309)
        options |= OP_NO_COMPRESSION

    context.options |= options

    if getattr(context, 'supports_set_ciphers', True):  # Platform-specific: Python 2.6
        context.set_ciphers(ciphers or DEFAULT_CIPHERS)

    context.verify_mode = cert_reqs
    if getattr(context, 'check_hostname', None) is not None:  # Platform-specific: Python 3.2
        # We do our own verification, including fingerprints and alternative
        # hostnames. So disable it here
        context.check_hostname = False
    return context 

def create_urllib3_context(ssl_version=None, cert_reqs=None,
                           options=None, ciphers=None):
    """All arguments have the same meaning as ``ssl_wrap_socket``.

    By default, this function does a lot of the same work that
    ``ssl.create_default_context`` does on Python 3.4+. It:

    - Disables SSLv2, SSLv3, and compression
    - Sets a restricted set of server ciphers

    If you wish to enable SSLv3, you can do::

        from pip._vendor.urllib3.util import ssl_
        context = ssl_.create_urllib3_context()
        context.options &= ~ssl_.OP_NO_SSLv3

    You can do the same to enable compression (substituting ``COMPRESSION``
    for ``SSLv3`` in the last line above).

    :param ssl_version:
        The desired protocol version to use. This will default to
        PROTOCOL_SSLv23 which will negotiate the highest protocol that both
        the server and your installation of OpenSSL support.
    :param cert_reqs:
        Whether to require the certificate verification. This defaults to
        ``ssl.CERT_REQUIRED``.
    :param options:
        Specific OpenSSL options. These default to ``ssl.OP_NO_SSLv2``,
        ``ssl.OP_NO_SSLv3``, ``ssl.OP_NO_COMPRESSION``.
    :param ciphers:
        Which cipher suites to allow the server to select.
    :returns:
        Constructed SSLContext object with specified options
    :rtype: SSLContext
    """
    context = SSLContext(ssl_version or ssl.PROTOCOL_SSLv23)

    context.set_ciphers(ciphers or DEFAULT_CIPHERS)

    # Setting the default here, as we may have no ssl module on import
    cert_reqs = ssl.CERT_REQUIRED if cert_reqs is None else cert_reqs

    if options is None:
        options = 0
        # SSLv2 is easily broken and is considered harmful and dangerous
        options |= OP_NO_SSLv2
        # SSLv3 has several problems and is now dangerous
        options |= OP_NO_SSLv3
        # Disable compression to prevent CRIME attacks for OpenSSL 1.0+
        # (issue #309)
        options |= OP_NO_COMPRESSION

    context.options |= options

    context.verify_mode = cert_reqs
    if getattr(context, 'check_hostname', None) is not None:  # Platform-specific: Python 3.2
        # We do our own verification, including fingerprints and alternative
        # hostnames. So disable it here
        context.check_hostname = False
    return context 

def create_urllib3_context(ssl_version=None, cert_reqs=None,
                           options=None, ciphers=None):
    """All arguments have the same meaning as ``ssl_wrap_socket``.

    By default, this function does a lot of the same work that
    ``ssl.create_default_context`` does on Python 3.4+. It:

    - Disables SSLv2, SSLv3, and compression
    - Sets a restricted set of server ciphers

    If you wish to enable SSLv3, you can do::

        from urllib3.util import ssl_
        context = ssl_.create_urllib3_context()
        context.options &= ~ssl_.OP_NO_SSLv3

    You can do the same to enable compression (substituting ``COMPRESSION``
    for ``SSLv3`` in the last line above).

    :param ssl_version:
        The desired protocol version to use. This will default to
        PROTOCOL_SSLv23 which will negotiate the highest protocol that both
        the server and your installation of OpenSSL support.
    :param cert_reqs:
        Whether to require the certificate verification. This defaults to
        ``ssl.CERT_REQUIRED``.
    :param options:
        Specific OpenSSL options. These default to ``ssl.OP_NO_SSLv2``,
        ``ssl.OP_NO_SSLv3``, ``ssl.OP_NO_COMPRESSION``.
    :param ciphers:
        Which cipher suites to allow the server to select.
    :returns:
        Constructed SSLContext object with specified options
    :rtype: SSLContext
    """
    context = SSLContext(ssl_version or ssl.PROTOCOL_SSLv23)

    context.set_ciphers(ciphers or DEFAULT_CIPHERS)

    # Setting the default here, as we may have no ssl module on import
    cert_reqs = ssl.CERT_REQUIRED if cert_reqs is None else cert_reqs

    if options is None:
        options = 0
        # SSLv2 is easily broken and is considered harmful and dangerous
        options |= OP_NO_SSLv2
        # SSLv3 has several problems and is now dangerous
        options |= OP_NO_SSLv3
        # Disable compression to prevent CRIME attacks for OpenSSL 1.0+
        # (issue #309)
        options |= OP_NO_COMPRESSION

    context.options |= options

    context.verify_mode = cert_reqs
    if getattr(context, 'check_hostname', None) is not None:  # Platform-specific: Python 3.2
        # We do our own verification, including fingerprints and alternative
        # hostnames. So disable it here
        context.check_hostname = False
    return context 

def create_urllib3_context(ssl_version=None, cert_reqs=None,
                           options=None, ciphers=None):
    """All arguments have the same meaning as ``ssl_wrap_socket``.

    By default, this function does a lot of the same work that
    ``ssl.create_default_context`` does on Python 3.4+. It:

    - Disables SSLv2, SSLv3, and compression
    - Sets a restricted set of server ciphers

    If you wish to enable SSLv3, you can do::

        from urllib3.util import ssl_
        context = ssl_.create_urllib3_context()
        context.options &= ~ssl_.OP_NO_SSLv3

    You can do the same to enable compression (substituting ``COMPRESSION``
    for ``SSLv3`` in the last line above).

    :param ssl_version:
        The desired protocol version to use. This will default to
        PROTOCOL_SSLv23 which will negotiate the highest protocol that both
        the server and your installation of OpenSSL support.
    :param cert_reqs:
        Whether to require the certificate verification. This defaults to
        ``ssl.CERT_REQUIRED``.
    :param options:
        Specific OpenSSL options. These default to ``ssl.OP_NO_SSLv2``,
        ``ssl.OP_NO_SSLv3``, ``ssl.OP_NO_COMPRESSION``.
    :param ciphers:
        Which cipher suites to allow the server to select.
    :returns:
        Constructed SSLContext object with specified options
    :rtype: SSLContext
    """
    context = SSLContext(ssl_version or PROTOCOL_TLS)

    context.set_ciphers(ciphers or DEFAULT_CIPHERS)

    # Setting the default here, as we may have no ssl module on import
    cert_reqs = ssl.CERT_REQUIRED if cert_reqs is None else cert_reqs

    if options is None:
        options = 0
        # SSLv2 is easily broken and is considered harmful and dangerous
        options |= OP_NO_SSLv2
        # SSLv3 has several problems and is now dangerous
        options |= OP_NO_SSLv3
        # Disable compression to prevent CRIME attacks for OpenSSL 1.0+
        # (issue #309)
        options |= OP_NO_COMPRESSION

    context.options |= options

    context.verify_mode = cert_reqs
    if getattr(context, 'check_hostname', None) is not None:  # Platform-specific: Python 3.2
        # We do our own verification, including fingerprints and alternative
        # hostnames. So disable it here
        context.check_hostname = False
    return context 

def create_urllib3_context(ssl_version=None, cert_reqs=None,
                           options=None, ciphers=None):
    """All arguments have the same meaning as ``ssl_wrap_socket``.

    By default, this function does a lot of the same work that
    ``ssl.create_default_context`` does on Python 3.4+. It:

    - Disables SSLv2, SSLv3, and compression
    - Sets a restricted set of server ciphers

    If you wish to enable SSLv3, you can do::

        from pip._vendor.urllib3.util import ssl_
        context = ssl_.create_urllib3_context()
        context.options &= ~ssl_.OP_NO_SSLv3

    You can do the same to enable compression (substituting ``COMPRESSION``
    for ``SSLv3`` in the last line above).

    :param ssl_version:
        The desired protocol version to use. This will default to
        PROTOCOL_SSLv23 which will negotiate the highest protocol that both
        the server and your installation of OpenSSL support.
    :param cert_reqs:
        Whether to require the certificate verification. This defaults to
        ``ssl.CERT_REQUIRED``.
    :param options:
        Specific OpenSSL options. These default to ``ssl.OP_NO_SSLv2``,
        ``ssl.OP_NO_SSLv3``, ``ssl.OP_NO_COMPRESSION``.
    :param ciphers:
        Which cipher suites to allow the server to select.
    :returns:
        Constructed SSLContext object with specified options
    :rtype: SSLContext
    """
    context = SSLContext(ssl_version or ssl.PROTOCOL_SSLv23)

    context.set_ciphers(ciphers or DEFAULT_CIPHERS)

    # Setting the default here, as we may have no ssl module on import
    cert_reqs = ssl.CERT_REQUIRED if cert_reqs is None else cert_reqs

    if options is None:
        options = 0
        # SSLv2 is easily broken and is considered harmful and dangerous
        options |= OP_NO_SSLv2
        # SSLv3 has several problems and is now dangerous
        options |= OP_NO_SSLv3
        # Disable compression to prevent CRIME attacks for OpenSSL 1.0+
        # (issue #309)
        options |= OP_NO_COMPRESSION

    context.options |= options

    context.verify_mode = cert_reqs
    if getattr(context, 'check_hostname', None) is not None:  # Platform-specific: Python 3.2
        # We do our own verification, including fingerprints and alternative
        # hostnames. So disable it here
        context.check_hostname = False
    return context 

def create_urllib3_context(ssl_version=None, cert_reqs=None,
                           options=None, ciphers=None):
    """All arguments have the same meaning as ``ssl_wrap_socket``.

    By default, this function does a lot of the same work that
    ``ssl.create_default_context`` does on Python 3.4+. It:

    - Disables SSLv2, SSLv3, and compression
    - Sets a restricted set of server ciphers

    If you wish to enable SSLv3, you can do::

        from urllib3.util import ssl_
        context = ssl_.create_urllib3_context()
        context.options &= ~ssl_.OP_NO_SSLv3

    You can do the same to enable compression (substituting ``COMPRESSION``
    for ``SSLv3`` in the last line above).

    :param ssl_version:
        The desired protocol version to use. This will default to
        PROTOCOL_SSLv23 which will negotiate the highest protocol that both
        the server and your installation of OpenSSL support.
    :param cert_reqs:
        Whether to require the certificate verification. This defaults to
        ``ssl.CERT_REQUIRED``.
    :param options:
        Specific OpenSSL options. These default to ``ssl.OP_NO_SSLv2``,
        ``ssl.OP_NO_SSLv3``, ``ssl.OP_NO_COMPRESSION``.
    :param ciphers:
        Which cipher suites to allow the server to select.
    :returns:
        Constructed SSLContext object with specified options
    :rtype: SSLContext
    """
    context = SSLContext(ssl_version or ssl.PROTOCOL_SSLv23)

    # Setting the default here, as we may have no ssl module on import
    cert_reqs = ssl.CERT_REQUIRED if cert_reqs is None else cert_reqs

    if options is None:
        options = 0
        # SSLv2 is easily broken and is considered harmful and dangerous
        options |= OP_NO_SSLv2
        # SSLv3 has several problems and is now dangerous
        options |= OP_NO_SSLv3
        # Disable compression to prevent CRIME attacks for OpenSSL 1.0+
        # (issue #309)
        options |= OP_NO_COMPRESSION

    context.options |= options

    if getattr(context, 'supports_set_ciphers', True):  # Platform-specific: Python 2.6
        context.set_ciphers(ciphers or DEFAULT_CIPHERS)

    context.verify_mode = cert_reqs
    if getattr(context, 'check_hostname', None) is not None:  # Platform-specific: Python 3.2
        # We do our own verification, including fingerprints and alternative
        # hostnames. So disable it here
        context.check_hostname = False
    return context 

def create_urllib3_context(ssl_version=None, cert_reqs=None,
                           options=None, ciphers=None):
    """All arguments have the same meaning as ``ssl_wrap_socket``.

    By default, this function does a lot of the same work that
    ``ssl.create_default_context`` does on Python 3.4+. It:

    - Disables SSLv2, SSLv3, and compression
    - Sets a restricted set of server ciphers

    If you wish to enable SSLv3, you can do::

        from urllib3.util import ssl_
        context = ssl_.create_urllib3_context()
        context.options &= ~ssl_.OP_NO_SSLv3

    You can do the same to enable compression (substituting ``COMPRESSION``
    for ``SSLv3`` in the last line above).

    :param ssl_version:
        The desired protocol version to use. This will default to
        PROTOCOL_SSLv23 which will negotiate the highest protocol that both
        the server and your installation of OpenSSL support.
    :param cert_reqs:
        Whether to require the certificate verification. This defaults to
        ``ssl.CERT_REQUIRED``.
    :param options:
        Specific OpenSSL options. These default to ``ssl.OP_NO_SSLv2``,
        ``ssl.OP_NO_SSLv3``, ``ssl.OP_NO_COMPRESSION``.
    :param ciphers:
        Which cipher suites to allow the server to select.
    :returns:
        Constructed SSLContext object with specified options
    :rtype: SSLContext
    """
    context = SSLContext(ssl_version or ssl.PROTOCOL_SSLv23)

    # Setting the default here, as we may have no ssl module on import
    cert_reqs = ssl.CERT_REQUIRED if cert_reqs is None else cert_reqs

    if options is None:
        options = 0
        # SSLv2 is easily broken and is considered harmful and dangerous
        options |= OP_NO_SSLv2
        # SSLv3 has several problems and is now dangerous
        options |= OP_NO_SSLv3
        # Disable compression to prevent CRIME attacks for OpenSSL 1.0+
        # (issue #309)
        options |= OP_NO_COMPRESSION

    context.options |= options

    if getattr(context, 'supports_set_ciphers', True):  # Platform-specific: Python 2.6
        context.set_ciphers(ciphers or DEFAULT_CIPHERS)

    context.verify_mode = cert_reqs
    if getattr(context, 'check_hostname', None) is not None:  # Platform-specific: Python 3.2
        # We do our own verification, including fingerprints and alternative
        # hostnames. So disable it here
        context.check_hostname = False
    return context 

def create_urllib3_context(ssl_version=None, cert_reqs=None,
                           options=None, ciphers=None):
    """All arguments have the same meaning as ``ssl_wrap_socket``.

    By default, this function does a lot of the same work that
    ``ssl.create_default_context`` does on Python 3.4+. It:

    - Disables SSLv2, SSLv3, and compression
    - Sets a restricted set of server ciphers

    If you wish to enable SSLv3, you can do::

        from urllib3.util import ssl_
        context = ssl_.create_urllib3_context()
        context.options &= ~ssl_.OP_NO_SSLv3

    You can do the same to enable compression (substituting ``COMPRESSION``
    for ``SSLv3`` in the last line above).

    :param ssl_version:
        The desired protocol version to use. This will default to
        PROTOCOL_SSLv23 which will negotiate the highest protocol that both
        the server and your installation of OpenSSL support.
    :param cert_reqs:
        Whether to require the certificate verification. This defaults to
        ``ssl.CERT_REQUIRED``.
    :param options:
        Specific OpenSSL options. These default to ``ssl.OP_NO_SSLv2``,
        ``ssl.OP_NO_SSLv3``, ``ssl.OP_NO_COMPRESSION``.
    :param ciphers:
        Which cipher suites to allow the server to select.
    :returns:
        Constructed SSLContext object with specified options
    :rtype: SSLContext
    """
    context = SSLContext(ssl_version or PROTOCOL_TLS)

    context.set_ciphers(ciphers or DEFAULT_CIPHERS)

    # Setting the default here, as we may have no ssl module on import
    cert_reqs = ssl.CERT_REQUIRED if cert_reqs is None else cert_reqs

    if options is None:
        options = 0
        # SSLv2 is easily broken and is considered harmful and dangerous
        options |= OP_NO_SSLv2
        # SSLv3 has several problems and is now dangerous
        options |= OP_NO_SSLv3
        # Disable compression to prevent CRIME attacks for OpenSSL 1.0+
        # (issue #309)
        options |= OP_NO_COMPRESSION

    context.options |= options

    context.verify_mode = cert_reqs
    if getattr(context, 'check_hostname', None) is not None:  # Platform-specific: Python 3.2
        # We do our own verification, including fingerprints and alternative
        # hostnames. So disable it here
        context.check_hostname = False
    return context 

def create_urllib3_context(ssl_version=None, cert_reqs=None,
                           options=None, ciphers=None):
    """All arguments have the same meaning as ``ssl_wrap_socket``.

    By default, this function does a lot of the same work that
    ``ssl.create_default_context`` does on Python 3.4+. It:

    - Disables SSLv2, SSLv3, and compression
    - Sets a restricted set of server ciphers

    If you wish to enable SSLv3, you can do::

        from urllib3.util import ssl_
        context = ssl_.create_urllib3_context()
        context.options &= ~ssl_.OP_NO_SSLv3

    You can do the same to enable compression (substituting ``COMPRESSION``
    for ``SSLv3`` in the last line above).

    :param ssl_version:
        The desired protocol version to use. This will default to
        PROTOCOL_SSLv23 which will negotiate the highest protocol that both
        the server and your installation of OpenSSL support.
    :param cert_reqs:
        Whether to require the certificate verification. This defaults to
        ``ssl.CERT_REQUIRED``.
    :param options:
        Specific OpenSSL options. These default to ``ssl.OP_NO_SSLv2``,
        ``ssl.OP_NO_SSLv3``, ``ssl.OP_NO_COMPRESSION``.
    :param ciphers:
        Which cipher suites to allow the server to select.
    :returns:
        Constructed SSLContext object with specified options
    :rtype: SSLContext
    """
    context = SSLContext(ssl_version or ssl.PROTOCOL_SSLv23)

    # Setting the default here, as we may have no ssl module on import
    cert_reqs = ssl.CERT_REQUIRED if cert_reqs is None else cert_reqs

    if options is None:
        options = 0
        # SSLv2 is easily broken and is considered harmful and dangerous
        options |= OP_NO_SSLv2
        # SSLv3 has several problems and is now dangerous
        options |= OP_NO_SSLv3
        # Disable compression to prevent CRIME attacks for OpenSSL 1.0+
        # (issue #309)
        options |= OP_NO_COMPRESSION

    context.options |= options

    if getattr(context, 'supports_set_ciphers', True):  # Platform-specific: Python 2.6
        context.set_ciphers(ciphers or DEFAULT_CIPHERS)

    context.verify_mode = cert_reqs
    if getattr(context, 'check_hostname', None) is not None:  # Platform-specific: Python 3.2
        # We do our own verification, including fingerprints and alternative
        # hostnames. So disable it here
        context.check_hostname = False
    return context 

def create_urllib3_context(ssl_version=None, cert_reqs=None,
                           options=None, ciphers=None):
    """All arguments have the same meaning as ``ssl_wrap_socket``.

    By default, this function does a lot of the same work that
    ``ssl.create_default_context`` does on Python 3.4+. It:

    - Disables SSLv2, SSLv3, and compression
    - Sets a restricted set of server ciphers

    If you wish to enable SSLv3, you can do::

        from urllib3.util import ssl_
        context = ssl_.create_urllib3_context()
        context.options &= ~ssl_.OP_NO_SSLv3

    You can do the same to enable compression (substituting ``COMPRESSION``
    for ``SSLv3`` in the last line above).

    :param ssl_version:
        The desired protocol version to use. This will default to
        PROTOCOL_SSLv23 which will negotiate the highest protocol that both
        the server and your installation of OpenSSL support.
    :param cert_reqs:
        Whether to require the certificate verification. This defaults to
        ``ssl.CERT_REQUIRED``.
    :param options:
        Specific OpenSSL options. These default to ``ssl.OP_NO_SSLv2``,
        ``ssl.OP_NO_SSLv3``, ``ssl.OP_NO_COMPRESSION``.
    :param ciphers:
        Which cipher suites to allow the server to select.
    :returns:
        Constructed SSLContext object with specified options
    :rtype: SSLContext
    """
    context = SSLContext(ssl_version or ssl.PROTOCOL_SSLv23)

    # Setting the default here, as we may have no ssl module on import
    cert_reqs = ssl.CERT_REQUIRED if cert_reqs is None else cert_reqs

    if options is None:
        options = 0
        # SSLv2 is easily broken and is considered harmful and dangerous
        options |= OP_NO_SSLv2
        # SSLv3 has several problems and is now dangerous
        options |= OP_NO_SSLv3
        # Disable compression to prevent CRIME attacks for OpenSSL 1.0+
        # (issue #309)
        options |= OP_NO_COMPRESSION

    context.options |= options

    if getattr(context, 'supports_set_ciphers', True):  # Platform-specific: Python 2.6
        context.set_ciphers(ciphers or DEFAULT_CIPHERS)

    context.verify_mode = cert_reqs
    if getattr(context, 'check_hostname', None) is not None:  # Platform-specific: Python 3.2
        # We do our own verification, including fingerprints and alternative
        # hostnames. So disable it here
        context.check_hostname = False
    return context 

def create_urllib3_context(ssl_version=None, cert_reqs=None,
                           options=None, ciphers=None):
    """All arguments have the same meaning as ``ssl_wrap_socket``.

    By default, this function does a lot of the same work that
    ``ssl.create_default_context`` does on Python 3.4+. It:

    - Disables SSLv2, SSLv3, and compression
    - Sets a restricted set of server ciphers

    If you wish to enable SSLv3, you can do::

        from urllib3.util import ssl_
        context = ssl_.create_urllib3_context()
        context.options &= ~ssl_.OP_NO_SSLv3

    You can do the same to enable compression (substituting ``COMPRESSION``
    for ``SSLv3`` in the last line above).

    :param ssl_version:
        The desired protocol version to use. This will default to
        PROTOCOL_SSLv23 which will negotiate the highest protocol that both
        the server and your installation of OpenSSL support.
    :param cert_reqs:
        Whether to require the certificate verification. This defaults to
        ``ssl.CERT_REQUIRED``.
    :param options:
        Specific OpenSSL options. These default to ``ssl.OP_NO_SSLv2``,
        ``ssl.OP_NO_SSLv3``, ``ssl.OP_NO_COMPRESSION``.
    :param ciphers:
        Which cipher suites to allow the server to select.
    :returns:
        Constructed SSLContext object with specified options
    :rtype: SSLContext
    """
    context = SSLContext(ssl_version or ssl.PROTOCOL_SSLv23)

    # Setting the default here, as we may have no ssl module on import
    cert_reqs = ssl.CERT_REQUIRED if cert_reqs is None else cert_reqs

    if options is None:
        options = 0
        # SSLv2 is easily broken and is considered harmful and dangerous
        options |= OP_NO_SSLv2
        # SSLv3 has several problems and is now dangerous
        options |= OP_NO_SSLv3
        # Disable compression to prevent CRIME attacks for OpenSSL 1.0+
        # (issue #309)
        options |= OP_NO_COMPRESSION

    context.options |= options

    if getattr(context, 'supports_set_ciphers', True):  # Platform-specific: Python 2.6
        context.set_ciphers(ciphers or DEFAULT_CIPHERS)

    context.verify_mode = cert_reqs
    if getattr(context, 'check_hostname', None) is not None:  # Platform-specific: Python 3.2
        # We do our own verification, including fingerprints and alternative
        # hostnames. So disable it here
        context.check_hostname = False
    return context