Python termios.ECHONL Examples

The following are 5 code examples of termios.ECHONL(). You can vote up the ones you like or vote down the ones you don't like, and go to the original project or source file by following the links above each example. You may also want to check out all available functions/classes of the module termios , or try the search function .
Example #1
Source File: input_kbd.py    From DeepPicar-v2 with GNU General Public License v2.0 6 votes vote down vote up
def init():
    fd = sys.stdin.fileno()
    # save old state
    flags_save = fcntl.fcntl(fd, fcntl.F_GETFL)
    attrs_save = termios.tcgetattr(fd)
    # make raw - the way to do this comes from the termios(3) man page.
    attrs = list(attrs_save) # copy the stored version to update
    # iflag
    attrs[0] &= ~(termios.IGNBRK | termios.BRKINT | termios.PARMRK 
                  | termios.ISTRIP | termios.INLCR | termios. IGNCR 
                  | termios.ICRNL | termios.IXON )
    # oflag
    attrs[1] &= ~termios.OPOST
    # cflag
    attrs[2] &= ~(termios.CSIZE | termios. PARENB)
    attrs[2] |= termios.CS8
    # lflag
    attrs[3] &= ~(termios.ECHONL | termios.ECHO | termios.ICANON
                  | termios.ISIG | termios.IEXTEN)
    termios.tcsetattr(fd, termios.TCSANOW, attrs)
    # turn off non-blocking
    fcntl.fcntl(fd, fcntl.F_SETFL, flags_save & ~os.O_NONBLOCK)
    # read a single keystroke
    return (flags_save, attrs_save) 
Example #2
Source File: recipe-580680.py    From code with MIT License 5 votes vote down vote up
def prepare_tty():                       
    "set the terminal in char mode (return each keyboard press at once) and"\
    " switch off echoing of this input; return the original settings"
    stdin_fd = sys.stdin.fileno()  # will most likely be 0  ;->
    old_stdin_config = termios.tcgetattr(stdin_fd)
    [ iflag, oflag, cflag, lflag, ispeed, ospeed, cc ] = \
        termios.tcgetattr(stdin_fd)
    cc[termios.VTIME] = 1
    cc[termios.VMIN] = 1
    iflag = iflag & ~(termios.IGNBRK |
                      termios.BRKINT |
                      termios.PARMRK |
                      termios.ISTRIP |
                      termios.INLCR |
                      termios.IGNCR |
                      #termios.ICRNL |
                      termios.IXON)
    #  oflag = oflag & ~termios.OPOST
    cflag = cflag | termios.CS8
    lflag = lflag & ~(termios.ECHO |
                      termios.ECHONL |
                      termios.ICANON |
                      # termios.ISIG |
                      termios.IEXTEN)
    termios.tcsetattr(stdin_fd, termios.TCSANOW,
                      [ iflag, oflag, cflag, lflag, ispeed, ospeed, cc ])
    return (stdin_fd, old_stdin_config) 
Example #3
Source File: cli.py    From simdem with MIT License 4 votes vote down vote up
def get_instruction_key(self):
        """Waits for a single keypress on stdin.

        This is a silly function to call if you need to do it a lot because it has
        to store stdin's current setup, setup stdin for reading single keystrokes
        then read the single keystroke then revert stdin back after reading the
        keystroke.

        Returns the character of the key that was pressed (zero on
        KeyboardInterrupt which can happen when a signal gets handled)

        This method is licensed under cc by-sa 3.0 
        Thanks to mheyman http://stackoverflow.com/questions/983354/how-do-i-make-python-to-wait-for-a-pressed-key\
        """
        import termios, fcntl, sys, os
        fd = sys.stdin.fileno()
        # save old state
        flags_save = fcntl.fcntl(fd, fcntl.F_GETFL)
        attrs_save = termios.tcgetattr(fd)
        # make raw - the way to do this comes from the termios(3) man page.
        attrs = list(attrs_save) # copy the stored version to update
        # iflag
        attrs[0] &= ~(termios.IGNBRK | termios.BRKINT | termios.PARMRK 
                      | termios.ISTRIP | termios.INLCR | termios. IGNCR 
                      | termios.ICRNL | termios.IXON )
        # oflag
        attrs[1] &= ~termios.OPOST
        # cflag
        attrs[2] &= ~(termios.CSIZE | termios. PARENB)
        attrs[2] |= termios.CS8
        # lflag
        attrs[3] &= ~(termios.ECHONL | termios.ECHO | termios.ICANON
                      | termios.ISIG | termios.IEXTEN)
        termios.tcsetattr(fd, termios.TCSANOW, attrs)
        # turn off non-blocking
        fcntl.fcntl(fd, fcntl.F_SETFL, flags_save & ~os.O_NONBLOCK)
        # read a single keystroke
        try:
            ret = sys.stdin.read(1) # returns a single character
        except KeyboardInterrupt:
            ret = 0
        finally:
            # restore old state
            termios.tcsetattr(fd, termios.TCSAFLUSH, attrs_save)
            fcntl.fcntl(fd, fcntl.F_SETFL, flags_save)
        return ret 
Example #4
Source File: Pipe.py    From redeem with GNU General Public License v3.0 4 votes vote down vote up
def __init__(self, printer, prot, iomanager):
    self.printer = printer
    self.prot = prot
    self.iomanager = iomanager

    (master_fd, slave_fd) = os.openpty()
    slave = os.ttyname(slave_fd)

    master_flags = fcntl.fcntl(master_fd, fcntl.F_GETFL, 0)
    fcntl.fcntl(master_fd, fcntl.F_SETFL, master_flags | os.O_NONBLOCK)

    # switch to "raw" mode - these constants come from the manpage for termios under cfmakeraw()
    master_attr = termios.tcgetattr(master_fd)
    master_attr[0] &= ~(termios.IGNBRK | termios.BRKINT | termios.PARMRK | termios.ISTRIP
                        | termios.INLCR | termios.IGNCR | termios.ICRNL | termios.IXON)
    master_attr[1] &= ~termios.OPOST
    master_attr[2] &= ~(termios.CSIZE | termios.PARENB)
    master_attr[3] &= ~(termios.ECHO | termios.ECHONL | termios.ICANON | termios.ISIG
                        | termios.IEXTEN)
    master_attr[3] |= termios.CS8
    termios.tcsetattr(master_fd, termios.TCSADRAIN, master_attr)

    # Fun detail: master will always show as /dev/ptmx, but the kernel knows from
    # the fd which PTY we're using. This means we have to use master_fd instead
    # of opening master by name.

    logging.info("Opened PTY for {} and got {}".format(prot, os.ttyname(slave_fd)))

    self.pipe_link = "/dev/" + prot + "_1"

    try:
      os.unlink(self.pipe_link)
    except OSError as e:
      # file not found is fine to ignore - anythine else and we should log it
      if e.errno != errno.ENOENT:
        logging.error("Failed to unlink '{}': {}".format(self.pipe_link, e.strerror))

    logging.info("linking {}".format(self.pipe_link))
    os.symlink(slave, self.pipe_link)
    os.chmod(self.pipe_link, 0o666)

    logging.info("{} Pipe open. Use '{}' to communicate with it".format(self.prot, self.pipe_link))

    self.rd = os.fdopen(master_fd, "r")
    self.wr = os.fdopen(master_fd, "w")

    self.send_response = True
    self.iomanager.add_file(self.rd, self.get_message) 
Example #5
Source File: misc.py    From fast-autocomplete with MIT License 4 votes vote down vote up
def read_single_keypress():
    """Waits for a single keypress on stdin.
    https://stackoverflow.com/a/6599441/1497443

    This is a silly function to call if you need to do it a lot because it has
    to store stdin's current setup, setup stdin for reading single keystrokes
    then read the single keystroke then revert stdin back after reading the
    keystroke.

    Returns the character of the key that was pressed (zero on
    KeyboardInterrupt which can happen when a signal gets handled)

    """
    if fcntl is None or termios is None:
        raise ValueError('termios and/or fcntl packages are not available in your system. This is possible because you are not on a Linux Distro.')
    fd = sys.stdin.fileno()
    # save old state
    flags_save = fcntl.fcntl(fd, fcntl.F_GETFL)
    attrs_save = termios.tcgetattr(fd)
    # make raw - the way to do this comes from the termios(3) man page.
    attrs = list(attrs_save)  # copy the stored version to update
    # iflag
    attrs[0] &= ~(termios.IGNBRK | termios.BRKINT | termios.PARMRK |
                  termios.ISTRIP | termios.INLCR | termios.IGNCR |
                  termios.ICRNL | termios.IXON)
    # oflag
    attrs[1] &= ~termios.OPOST
    # cflag
    attrs[2] &= ~(termios.CSIZE | termios. PARENB)
    attrs[2] |= termios.CS8
    # lflag
    attrs[3] &= ~(termios.ECHONL | termios.ECHO | termios.ICANON |
                  termios.ISIG | termios.IEXTEN)
    termios.tcsetattr(fd, termios.TCSANOW, attrs)
    # turn off non-blocking
    fcntl.fcntl(fd, fcntl.F_SETFL, flags_save & ~os.O_NONBLOCK)
    # read a single keystroke
    try:
        ret = sys.stdin.read(1)  # returns a single character
    except KeyboardInterrupt:
        ret = 0
    finally:
        # restore old state
        termios.tcsetattr(fd, termios.TCSAFLUSH, attrs_save)
        fcntl.fcntl(fd, fcntl.F_SETFL, flags_save)
    return ret