Java Code Examples for org.jfree.chart.Effect3D#getYOffset()
The following examples show how to use
org.jfree.chart.Effect3D#getYOffset() .
You can vote up the ones you like or vote down the ones you don't like,
and go to the original project or source file by following the links above each example. You may check out the related API usage on the sidebar.
Example 1
| Source File: CategoryAxis3D.java From ECG-Viewer with GNU General Public License v2.0 | 4 votes |
|
/**
* Draws the axis on a Java 2D graphics device (such as the screen or a
* printer).
*
* @param g2 the graphics device (<code>null</code> not permitted).
* @param cursor the cursor location.
* @param plotArea the area within which the axis should be drawn
* (<code>null</code> not permitted).
* @param dataArea the area within which the plot is being drawn
* (<code>null</code> not permitted).
* @param edge the location of the axis (<code>null</code> not permitted).
* @param plotState collects information about the plot (<code>null</code>
* permitted).
*
* @return The axis state (never <code>null</code>).
*/
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
Rectangle2D dataArea, RectangleEdge edge,
PlotRenderingInfo plotState) {
// if the axis is not visible, don't draw it...
if (!isVisible()) {
return new AxisState(cursor);
}
// calculate the adjusted data area taking into account the 3D effect...
// this assumes that there is a 3D renderer, all this 3D effect is a
// bit of an ugly hack...
CategoryPlot plot = (CategoryPlot) getPlot();
Rectangle2D adjustedDataArea = new Rectangle2D.Double();
if (plot.getRenderer() instanceof Effect3D) {
Effect3D e3D = (Effect3D) plot.getRenderer();
double adjustedX = dataArea.getMinX();
double adjustedY = dataArea.getMinY();
double adjustedW = dataArea.getWidth() - e3D.getXOffset();
double adjustedH = dataArea.getHeight() - e3D.getYOffset();
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += e3D.getYOffset();
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += e3D.getXOffset();
}
adjustedDataArea.setRect(adjustedX, adjustedY, adjustedW,
adjustedH);
}
else {
adjustedDataArea.setRect(dataArea);
}
if (isAxisLineVisible()) {
drawAxisLine(g2, cursor, adjustedDataArea, edge);
}
// draw the category labels and axis label
AxisState state = new AxisState(cursor);
if (isTickMarksVisible()) {
drawTickMarks(g2, cursor, adjustedDataArea, edge, state);
}
state = drawCategoryLabels(g2, plotArea, adjustedDataArea, edge,
state, plotState);
if (getAttributedLabel() != null) {
state = drawAttributedLabel(getAttributedLabel(), g2, plotArea,
dataArea, edge, state);
} else {
state = drawLabel(getLabel(), g2, plotArea, dataArea, edge, state);
}
return state;
}
Example 2
| Source File: CategoryAxis3D.java From opensim-gui with Apache License 2.0 | 4 votes |
|
/**
* Draws the axis on a Java 2D graphics device (such as the screen or a
* printer).
*
* @param g2 the graphics device (<code>null</code> not permitted).
* @param cursor the cursor location.
* @param plotArea the area within which the axis should be drawn
* (<code>null</code> not permitted).
* @param dataArea the area within which the plot is being drawn
* (<code>null</code> not permitted).
* @param edge the location of the axis (<code>null</code> not permitted).
* @param plotState collects information about the plot (<code>null</code>
* permitted).
*
* @return The axis state (never <code>null</code>).
*/
public AxisState draw(Graphics2D g2,
double cursor,
Rectangle2D plotArea,
Rectangle2D dataArea,
RectangleEdge edge,
PlotRenderingInfo plotState) {
// if the axis is not visible, don't draw it...
if (!isVisible()) {
return new AxisState(cursor);
}
// calculate the adjusted data area taking into account the 3D effect...
// this assumes that there is a 3D renderer, all this 3D effect is a
// bit of an ugly hack...
CategoryPlot plot = (CategoryPlot) getPlot();
Rectangle2D adjustedDataArea = new Rectangle2D.Double();
if (plot.getRenderer() instanceof Effect3D) {
Effect3D e3D = (Effect3D) plot.getRenderer();
double adjustedX = dataArea.getMinX();
double adjustedY = dataArea.getMinY();
double adjustedW = dataArea.getWidth() - e3D.getXOffset();
double adjustedH = dataArea.getHeight() - e3D.getYOffset();
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += e3D.getYOffset();
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += e3D.getXOffset();
}
adjustedDataArea.setRect(adjustedX, adjustedY, adjustedW,
adjustedH);
}
else {
adjustedDataArea.setRect(dataArea);
}
// draw the category labels and axis label
AxisState state = new AxisState(cursor);
state = drawCategoryLabels(g2, plotArea, adjustedDataArea, edge,
state, plotState);
state = drawLabel(getLabel(), g2, plotArea, dataArea, edge, state);
return state;
}
Example 3
| Source File: NumberAxis3D.java From opensim-gui with Apache License 2.0 | 4 votes |
|
/**
* Draws the axis on a Java 2D graphics device (such as the screen or a
* printer).
*
* @param g2 the graphics device.
* @param cursor the cursor.
* @param plotArea the area for drawing the axes and data.
* @param dataArea the area for drawing the data (a subset of the
* plotArea).
* @param edge the axis location.
* @param plotState collects information about the plot (<code>null</code>
* permitted).
*
* @return The updated cursor value.
*/
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
Rectangle2D dataArea, RectangleEdge edge,
PlotRenderingInfo plotState) {
// if the axis is not visible, don't draw it...
if (!isVisible()) {
AxisState state = new AxisState(cursor);
// even though the axis is not visible, we need ticks for the
// gridlines...
List ticks = refreshTicks(g2, state, dataArea, edge);
state.setTicks(ticks);
return state;
}
// calculate the adjusted data area taking into account the 3D effect...
double xOffset = 0.0;
double yOffset = 0.0;
Plot plot = getPlot();
if (plot instanceof CategoryPlot) {
CategoryPlot cp = (CategoryPlot) plot;
CategoryItemRenderer r = cp.getRenderer();
if (r instanceof Effect3D) {
Effect3D e3D = (Effect3D) r;
xOffset = e3D.getXOffset();
yOffset = e3D.getYOffset();
}
}
double adjustedX = dataArea.getMinX();
double adjustedY = dataArea.getMinY();
double adjustedW = dataArea.getWidth() - xOffset;
double adjustedH = dataArea.getHeight() - yOffset;
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += yOffset;
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += xOffset;
}
Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX,
adjustedY, adjustedW, adjustedH);
// draw the tick marks and labels...
AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea,
adjustedDataArea, edge);
// draw the axis label...
info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info);
return info;
}
Example 4
| Source File: CategoryAxis3D.java From astor with GNU General Public License v2.0 | 4 votes |
|
/**
* Returns the Java 2D coordinate for a category.
*
* @param anchor the anchor point.
* @param category the category index.
* @param categoryCount the category count.
* @param area the data area.
* @param edge the location of the axis.
*
* @return The coordinate.
*/
public double getCategoryJava2DCoordinate(CategoryAnchor anchor,
int category,
int categoryCount,
Rectangle2D area,
RectangleEdge edge) {
double result = 0.0;
Rectangle2D adjustedArea = area;
CategoryPlot plot = (CategoryPlot) getPlot();
CategoryItemRenderer renderer = plot.getRenderer();
if (renderer instanceof Effect3D) {
Effect3D e3D = (Effect3D) renderer;
double adjustedX = area.getMinX();
double adjustedY = area.getMinY();
double adjustedW = area.getWidth() - e3D.getXOffset();
double adjustedH = area.getHeight() - e3D.getYOffset();
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += e3D.getYOffset();
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += e3D.getXOffset();
}
adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY,
adjustedW, adjustedH);
}
if (anchor == CategoryAnchor.START) {
result = getCategoryStart(category, categoryCount, adjustedArea,
edge);
}
else if (anchor == CategoryAnchor.MIDDLE) {
result = getCategoryMiddle(category, categoryCount, adjustedArea,
edge);
}
else if (anchor == CategoryAnchor.END) {
result = getCategoryEnd(category, categoryCount, adjustedArea,
edge);
}
return result;
}
Example 5
| Source File: NumberAxis3D.java From buffer_bci with GNU General Public License v3.0 | 4 votes |
|
/**
* Draws the axis on a Java 2D graphics device (such as the screen or a
* printer).
*
* @param g2 the graphics device.
* @param cursor the cursor.
* @param plotArea the area for drawing the axes and data.
* @param dataArea the area for drawing the data (a subset of the
* plotArea).
* @param edge the axis location.
* @param plotState collects information about the plot (<code>null</code>
* permitted).
*
* @return The updated cursor value.
*/
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
Rectangle2D dataArea, RectangleEdge edge,
PlotRenderingInfo plotState) {
// if the axis is not visible, don't draw it...
if (!isVisible()) {
AxisState state = new AxisState(cursor);
// even though the axis is not visible, we need ticks for the
// gridlines...
List ticks = refreshTicks(g2, state, dataArea, edge);
state.setTicks(ticks);
return state;
}
// calculate the adjusted data area taking into account the 3D effect...
double xOffset = 0.0;
double yOffset = 0.0;
Plot plot = getPlot();
if (plot instanceof CategoryPlot) {
CategoryPlot cp = (CategoryPlot) plot;
CategoryItemRenderer r = cp.getRenderer();
if (r instanceof Effect3D) {
Effect3D e3D = (Effect3D) r;
xOffset = e3D.getXOffset();
yOffset = e3D.getYOffset();
}
}
double adjustedX = dataArea.getMinX();
double adjustedY = dataArea.getMinY();
double adjustedW = dataArea.getWidth() - xOffset;
double adjustedH = dataArea.getHeight() - yOffset;
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += yOffset;
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += xOffset;
}
Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX,
adjustedY, adjustedW, adjustedH);
// draw the tick marks and labels...
AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea,
adjustedDataArea, edge);
if (getAttributedLabel() != null) {
info = drawAttributedLabel(getAttributedLabel(), g2, plotArea,
dataArea, edge, info);
} else {
info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info);
}
return info;
}
Example 6
| Source File: CategoryAxis3D.java From buffer_bci with GNU General Public License v3.0 | 4 votes |
|
/**
* Returns the Java 2D coordinate for a category.
*
* @param anchor the anchor point.
* @param category the category index.
* @param categoryCount the category count.
* @param area the data area.
* @param edge the location of the axis.
*
* @return The coordinate.
*/
@Override
public double getCategoryJava2DCoordinate(CategoryAnchor anchor,
int category, int categoryCount, Rectangle2D area,
RectangleEdge edge) {
double result = 0.0;
Rectangle2D adjustedArea = area;
CategoryPlot plot = (CategoryPlot) getPlot();
CategoryItemRenderer renderer = plot.getRenderer();
if (renderer instanceof Effect3D) {
Effect3D e3D = (Effect3D) renderer;
double adjustedX = area.getMinX();
double adjustedY = area.getMinY();
double adjustedW = area.getWidth() - e3D.getXOffset();
double adjustedH = area.getHeight() - e3D.getYOffset();
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += e3D.getYOffset();
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += e3D.getXOffset();
}
adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY,
adjustedW, adjustedH);
}
if (anchor == CategoryAnchor.START) {
result = getCategoryStart(category, categoryCount, adjustedArea,
edge);
}
else if (anchor == CategoryAnchor.MIDDLE) {
result = getCategoryMiddle(category, categoryCount, adjustedArea,
edge);
}
else if (anchor == CategoryAnchor.END) {
result = getCategoryEnd(category, categoryCount, adjustedArea,
edge);
}
return result;
}
Example 7
| Source File: CategoryAxis3D.java From astor with GNU General Public License v2.0 | 4 votes |
|
/**
* Returns the Java 2D coordinate for a category.
*
* @param anchor the anchor point.
* @param category the category index.
* @param categoryCount the category count.
* @param area the data area.
* @param edge the location of the axis.
*
* @return The coordinate.
*/
public double getCategoryJava2DCoordinate(CategoryAnchor anchor,
int category,
int categoryCount,
Rectangle2D area,
RectangleEdge edge) {
double result = 0.0;
Rectangle2D adjustedArea = area;
CategoryPlot plot = (CategoryPlot) getPlot();
CategoryItemRenderer renderer = plot.getRenderer();
if (renderer instanceof Effect3D) {
Effect3D e3D = (Effect3D) renderer;
double adjustedX = area.getMinX();
double adjustedY = area.getMinY();
double adjustedW = area.getWidth() - e3D.getXOffset();
double adjustedH = area.getHeight() - e3D.getYOffset();
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += e3D.getYOffset();
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += e3D.getXOffset();
}
adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY,
adjustedW, adjustedH);
}
if (anchor == CategoryAnchor.START) {
result = getCategoryStart(category, categoryCount, adjustedArea,
edge);
}
else if (anchor == CategoryAnchor.MIDDLE) {
result = getCategoryMiddle(category, categoryCount, adjustedArea,
edge);
}
else if (anchor == CategoryAnchor.END) {
result = getCategoryEnd(category, categoryCount, adjustedArea,
edge);
}
return result;
}
Example 8
| Source File: CategoryAxis3D.java From astor with GNU General Public License v2.0 | 4 votes |
|
/**
* Draws the axis on a Java 2D graphics device (such as the screen or a
* printer).
*
* @param g2 the graphics device (<code>null</code> not permitted).
* @param cursor the cursor location.
* @param plotArea the area within which the axis should be drawn
* (<code>null</code> not permitted).
* @param dataArea the area within which the plot is being drawn
* (<code>null</code> not permitted).
* @param edge the location of the axis (<code>null</code> not permitted).
* @param plotState collects information about the plot (<code>null</code>
* permitted).
*
* @return The axis state (never <code>null</code>).
*/
public AxisState draw(Graphics2D g2,
double cursor,
Rectangle2D plotArea,
Rectangle2D dataArea,
RectangleEdge edge,
PlotRenderingInfo plotState) {
// if the axis is not visible, don't draw it...
if (!isVisible()) {
return new AxisState(cursor);
}
// calculate the adjusted data area taking into account the 3D effect...
// this assumes that there is a 3D renderer, all this 3D effect is a
// bit of an ugly hack...
CategoryPlot plot = (CategoryPlot) getPlot();
Rectangle2D adjustedDataArea = new Rectangle2D.Double();
if (plot.getRenderer() instanceof Effect3D) {
Effect3D e3D = (Effect3D) plot.getRenderer();
double adjustedX = dataArea.getMinX();
double adjustedY = dataArea.getMinY();
double adjustedW = dataArea.getWidth() - e3D.getXOffset();
double adjustedH = dataArea.getHeight() - e3D.getYOffset();
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += e3D.getYOffset();
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += e3D.getXOffset();
}
adjustedDataArea.setRect(adjustedX, adjustedY, adjustedW,
adjustedH);
}
else {
adjustedDataArea.setRect(dataArea);
}
if (isAxisLineVisible()) {
drawAxisLine(g2, cursor, adjustedDataArea, edge);
}
// draw the category labels and axis label
AxisState state = new AxisState(cursor);
if (isTickMarksVisible()) {
drawTickMarks(g2, cursor, adjustedDataArea, edge, state);
}
state = drawCategoryLabels(g2, plotArea, adjustedDataArea, edge,
state, plotState);
state = drawLabel(getLabel(), g2, plotArea, dataArea, edge, state,
plotState);
return state;
}
Example 9
| Source File: CategoryAxis3D.java From opensim-gui with Apache License 2.0 | 4 votes |
|
/**
* Returns the Java 2D coordinate for a category.
*
* @param anchor the anchor point.
* @param category the category index.
* @param categoryCount the category count.
* @param area the data area.
* @param edge the location of the axis.
*
* @return The coordinate.
*/
public double getCategoryJava2DCoordinate(CategoryAnchor anchor,
int category,
int categoryCount,
Rectangle2D area,
RectangleEdge edge) {
double result = 0.0;
Rectangle2D adjustedArea = area;
CategoryPlot plot = (CategoryPlot) getPlot();
CategoryItemRenderer renderer = plot.getRenderer();
if (renderer instanceof Effect3D) {
Effect3D e3D = (Effect3D) renderer;
double adjustedX = area.getMinX();
double adjustedY = area.getMinY();
double adjustedW = area.getWidth() - e3D.getXOffset();
double adjustedH = area.getHeight() - e3D.getYOffset();
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += e3D.getYOffset();
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += e3D.getXOffset();
}
adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY,
adjustedW, adjustedH);
}
if (anchor == CategoryAnchor.START) {
result = getCategoryStart(category, categoryCount, adjustedArea,
edge);
}
else if (anchor == CategoryAnchor.MIDDLE) {
result = getCategoryMiddle(category, categoryCount, adjustedArea,
edge);
}
else if (anchor == CategoryAnchor.END) {
result = getCategoryEnd(category, categoryCount, adjustedArea,
edge);
}
return result;
}
Example 10
| Source File: CategoryAxis3D.java From buffer_bci with GNU General Public License v3.0 | 4 votes |
|
/**
* Returns the Java 2D coordinate for a category.
*
* @param anchor the anchor point.
* @param category the category index.
* @param categoryCount the category count.
* @param area the data area.
* @param edge the location of the axis.
*
* @return The coordinate.
*/
@Override
public double getCategoryJava2DCoordinate(CategoryAnchor anchor,
int category, int categoryCount, Rectangle2D area,
RectangleEdge edge) {
double result = 0.0;
Rectangle2D adjustedArea = area;
CategoryPlot plot = (CategoryPlot) getPlot();
CategoryItemRenderer renderer = plot.getRenderer();
if (renderer instanceof Effect3D) {
Effect3D e3D = (Effect3D) renderer;
double adjustedX = area.getMinX();
double adjustedY = area.getMinY();
double adjustedW = area.getWidth() - e3D.getXOffset();
double adjustedH = area.getHeight() - e3D.getYOffset();
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += e3D.getYOffset();
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += e3D.getXOffset();
}
adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY,
adjustedW, adjustedH);
}
if (anchor == CategoryAnchor.START) {
result = getCategoryStart(category, categoryCount, adjustedArea,
edge);
}
else if (anchor == CategoryAnchor.MIDDLE) {
result = getCategoryMiddle(category, categoryCount, adjustedArea,
edge);
}
else if (anchor == CategoryAnchor.END) {
result = getCategoryEnd(category, categoryCount, adjustedArea,
edge);
}
return result;
}
Example 11
| Source File: NumberAxis3D.java From openstock with GNU General Public License v3.0 | 4 votes |
|
/**
* Draws the axis on a Java 2D graphics device (such as the screen or a
* printer).
*
* @param g2 the graphics device.
* @param cursor the cursor.
* @param plotArea the area for drawing the axes and data.
* @param dataArea the area for drawing the data (a subset of the
* plotArea).
* @param edge the axis location.
* @param plotState collects information about the plot (<code>null</code>
* permitted).
*
* @return The updated cursor value.
*/
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
Rectangle2D dataArea, RectangleEdge edge,
PlotRenderingInfo plotState) {
// if the axis is not visible, don't draw it...
if (!isVisible()) {
AxisState state = new AxisState(cursor);
// even though the axis is not visible, we need ticks for the
// gridlines...
List ticks = refreshTicks(g2, state, dataArea, edge);
state.setTicks(ticks);
return state;
}
// calculate the adjusted data area taking into account the 3D effect...
double xOffset = 0.0;
double yOffset = 0.0;
Plot plot = getPlot();
if (plot instanceof CategoryPlot) {
CategoryPlot cp = (CategoryPlot) plot;
CategoryItemRenderer r = cp.getRenderer();
if (r instanceof Effect3D) {
Effect3D e3D = (Effect3D) r;
xOffset = e3D.getXOffset();
yOffset = e3D.getYOffset();
}
}
double adjustedX = dataArea.getMinX();
double adjustedY = dataArea.getMinY();
double adjustedW = dataArea.getWidth() - xOffset;
double adjustedH = dataArea.getHeight() - yOffset;
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += yOffset;
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += xOffset;
}
Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX,
adjustedY, adjustedW, adjustedH);
// draw the tick marks and labels...
AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea,
adjustedDataArea, edge);
if (getAttributedLabel() != null) {
info = drawAttributedLabel(getAttributedLabel(), g2, plotArea,
dataArea, edge, info);
} else {
info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info);
}
return info;
}
Example 12
| Source File: NumberAxis3D.java From ECG-Viewer with GNU General Public License v2.0 | 4 votes |
|
/**
* Draws the axis on a Java 2D graphics device (such as the screen or a
* printer).
*
* @param g2 the graphics device.
* @param cursor the cursor.
* @param plotArea the area for drawing the axes and data.
* @param dataArea the area for drawing the data (a subset of the
* plotArea).
* @param edge the axis location.
* @param plotState collects information about the plot (<code>null</code>
* permitted).
*
* @return The updated cursor value.
*/
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
Rectangle2D dataArea, RectangleEdge edge,
PlotRenderingInfo plotState) {
// if the axis is not visible, don't draw it...
if (!isVisible()) {
AxisState state = new AxisState(cursor);
// even though the axis is not visible, we need ticks for the
// gridlines...
List ticks = refreshTicks(g2, state, dataArea, edge);
state.setTicks(ticks);
return state;
}
// calculate the adjusted data area taking into account the 3D effect...
double xOffset = 0.0;
double yOffset = 0.0;
Plot plot = getPlot();
if (plot instanceof CategoryPlot) {
CategoryPlot cp = (CategoryPlot) plot;
CategoryItemRenderer r = cp.getRenderer();
if (r instanceof Effect3D) {
Effect3D e3D = (Effect3D) r;
xOffset = e3D.getXOffset();
yOffset = e3D.getYOffset();
}
}
double adjustedX = dataArea.getMinX();
double adjustedY = dataArea.getMinY();
double adjustedW = dataArea.getWidth() - xOffset;
double adjustedH = dataArea.getHeight() - yOffset;
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += yOffset;
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += xOffset;
}
Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX,
adjustedY, adjustedW, adjustedH);
// draw the tick marks and labels...
AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea,
adjustedDataArea, edge);
if (getAttributedLabel() != null) {
info = drawAttributedLabel(getAttributedLabel(), g2, plotArea,
dataArea, edge, info);
} else {
info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info);
}
return info;
}
Example 13
| Source File: CategoryAxis3D.java From SIMVA-SoS with Apache License 2.0 | 4 votes |
|
/**
* Returns the Java 2D coordinate for a category.
*
* @param anchor the anchor point.
* @param category the category index.
* @param categoryCount the category count.
* @param area the data area.
* @param edge the location of the axis.
*
* @return The coordinate.
*/
@Override
public double getCategoryJava2DCoordinate(CategoryAnchor anchor,
int category, int categoryCount, Rectangle2D area,
RectangleEdge edge) {
double result = 0.0;
Rectangle2D adjustedArea = area;
CategoryPlot plot = (CategoryPlot) getPlot();
CategoryItemRenderer renderer = plot.getRenderer();
if (renderer instanceof Effect3D) {
Effect3D e3D = (Effect3D) renderer;
double adjustedX = area.getMinX();
double adjustedY = area.getMinY();
double adjustedW = area.getWidth() - e3D.getXOffset();
double adjustedH = area.getHeight() - e3D.getYOffset();
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += e3D.getYOffset();
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += e3D.getXOffset();
}
adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY,
adjustedW, adjustedH);
}
if (anchor == CategoryAnchor.START) {
result = getCategoryStart(category, categoryCount, adjustedArea,
edge);
}
else if (anchor == CategoryAnchor.MIDDLE) {
result = getCategoryMiddle(category, categoryCount, adjustedArea,
edge);
}
else if (anchor == CategoryAnchor.END) {
result = getCategoryEnd(category, categoryCount, adjustedArea,
edge);
}
return result;
}
Example 14
| Source File: CategoryAxis3D.java From SIMVA-SoS with Apache License 2.0 | 4 votes |
|
/**
* Draws the axis on a Java 2D graphics device (such as the screen or a
* printer).
*
* @param g2 the graphics device (<code>null</code> not permitted).
* @param cursor the cursor location.
* @param plotArea the area within which the axis should be drawn
* (<code>null</code> not permitted).
* @param dataArea the area within which the plot is being drawn
* (<code>null</code> not permitted).
* @param edge the location of the axis (<code>null</code> not permitted).
* @param plotState collects information about the plot (<code>null</code>
* permitted).
*
* @return The axis state (never <code>null</code>).
*/
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
Rectangle2D dataArea, RectangleEdge edge,
PlotRenderingInfo plotState) {
// if the axis is not visible, don't draw it...
if (!isVisible()) {
return new AxisState(cursor);
}
// calculate the adjusted data area taking into account the 3D effect...
// this assumes that there is a 3D renderer, all this 3D effect is a
// bit of an ugly hack...
CategoryPlot plot = (CategoryPlot) getPlot();
Rectangle2D adjustedDataArea = new Rectangle2D.Double();
if (plot.getRenderer() instanceof Effect3D) {
Effect3D e3D = (Effect3D) plot.getRenderer();
double adjustedX = dataArea.getMinX();
double adjustedY = dataArea.getMinY();
double adjustedW = dataArea.getWidth() - e3D.getXOffset();
double adjustedH = dataArea.getHeight() - e3D.getYOffset();
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += e3D.getYOffset();
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += e3D.getXOffset();
}
adjustedDataArea.setRect(adjustedX, adjustedY, adjustedW,
adjustedH);
}
else {
adjustedDataArea.setRect(dataArea);
}
if (isAxisLineVisible()) {
drawAxisLine(g2, cursor, adjustedDataArea, edge);
}
// draw the category labels and axis label
AxisState state = new AxisState(cursor);
if (isTickMarksVisible()) {
drawTickMarks(g2, cursor, adjustedDataArea, edge, state);
}
state = drawCategoryLabels(g2, plotArea, adjustedDataArea, edge,
state, plotState);
if (getAttributedLabel() != null) {
state = drawAttributedLabel(getAttributedLabel(), g2, plotArea,
dataArea, edge, state);
} else {
state = drawLabel(getLabel(), g2, plotArea, dataArea, edge, state);
}
return state;
}
Example 15
| Source File: NumberAxis3D.java From SIMVA-SoS with Apache License 2.0 | 4 votes |
|
/**
* Draws the axis on a Java 2D graphics device (such as the screen or a
* printer).
*
* @param g2 the graphics device.
* @param cursor the cursor.
* @param plotArea the area for drawing the axes and data.
* @param dataArea the area for drawing the data (a subset of the
* plotArea).
* @param edge the axis location.
* @param plotState collects information about the plot (<code>null</code>
* permitted).
*
* @return The updated cursor value.
*/
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
Rectangle2D dataArea, RectangleEdge edge,
PlotRenderingInfo plotState) {
// if the axis is not visible, don't draw it...
if (!isVisible()) {
AxisState state = new AxisState(cursor);
// even though the axis is not visible, we need ticks for the
// gridlines...
List ticks = refreshTicks(g2, state, dataArea, edge);
state.setTicks(ticks);
return state;
}
// calculate the adjusted data area taking into account the 3D effect...
double xOffset = 0.0;
double yOffset = 0.0;
Plot plot = getPlot();
if (plot instanceof CategoryPlot) {
CategoryPlot cp = (CategoryPlot) plot;
CategoryItemRenderer r = cp.getRenderer();
if (r instanceof Effect3D) {
Effect3D e3D = (Effect3D) r;
xOffset = e3D.getXOffset();
yOffset = e3D.getYOffset();
}
}
double adjustedX = dataArea.getMinX();
double adjustedY = dataArea.getMinY();
double adjustedW = dataArea.getWidth() - xOffset;
double adjustedH = dataArea.getHeight() - yOffset;
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += yOffset;
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += xOffset;
}
Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX,
adjustedY, adjustedW, adjustedH);
// draw the tick marks and labels...
AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea,
adjustedDataArea, edge);
if (getAttributedLabel() != null) {
info = drawAttributedLabel(getAttributedLabel(), g2, plotArea,
dataArea, edge, info);
} else {
info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info);
}
return info;
}
Example 16
| Source File: CategoryAxis3D.java From ccu-historian with GNU General Public License v3.0 | 4 votes |
|
/**
* Returns the Java 2D coordinate for a category.
*
* @param anchor the anchor point.
* @param category the category index.
* @param categoryCount the category count.
* @param area the data area.
* @param edge the location of the axis.
*
* @return The coordinate.
*/
@Override
public double getCategoryJava2DCoordinate(CategoryAnchor anchor,
int category, int categoryCount, Rectangle2D area,
RectangleEdge edge) {
double result = 0.0;
Rectangle2D adjustedArea = area;
CategoryPlot plot = (CategoryPlot) getPlot();
CategoryItemRenderer renderer = plot.getRenderer();
if (renderer instanceof Effect3D) {
Effect3D e3D = (Effect3D) renderer;
double adjustedX = area.getMinX();
double adjustedY = area.getMinY();
double adjustedW = area.getWidth() - e3D.getXOffset();
double adjustedH = area.getHeight() - e3D.getYOffset();
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += e3D.getYOffset();
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += e3D.getXOffset();
}
adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY,
adjustedW, adjustedH);
}
if (anchor == CategoryAnchor.START) {
result = getCategoryStart(category, categoryCount, adjustedArea,
edge);
}
else if (anchor == CategoryAnchor.MIDDLE) {
result = getCategoryMiddle(category, categoryCount, adjustedArea,
edge);
}
else if (anchor == CategoryAnchor.END) {
result = getCategoryEnd(category, categoryCount, adjustedArea,
edge);
}
return result;
}
Example 17
| Source File: CategoryAxis3D.java From ccu-historian with GNU General Public License v3.0 | 4 votes |
|
/**
* Draws the axis on a Java 2D graphics device (such as the screen or a
* printer).
*
* @param g2 the graphics device (<code>null</code> not permitted).
* @param cursor the cursor location.
* @param plotArea the area within which the axis should be drawn
* (<code>null</code> not permitted).
* @param dataArea the area within which the plot is being drawn
* (<code>null</code> not permitted).
* @param edge the location of the axis (<code>null</code> not permitted).
* @param plotState collects information about the plot (<code>null</code>
* permitted).
*
* @return The axis state (never <code>null</code>).
*/
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
Rectangle2D dataArea, RectangleEdge edge,
PlotRenderingInfo plotState) {
// if the axis is not visible, don't draw it...
if (!isVisible()) {
return new AxisState(cursor);
}
// calculate the adjusted data area taking into account the 3D effect...
// this assumes that there is a 3D renderer, all this 3D effect is a
// bit of an ugly hack...
CategoryPlot plot = (CategoryPlot) getPlot();
Rectangle2D adjustedDataArea = new Rectangle2D.Double();
if (plot.getRenderer() instanceof Effect3D) {
Effect3D e3D = (Effect3D) plot.getRenderer();
double adjustedX = dataArea.getMinX();
double adjustedY = dataArea.getMinY();
double adjustedW = dataArea.getWidth() - e3D.getXOffset();
double adjustedH = dataArea.getHeight() - e3D.getYOffset();
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += e3D.getYOffset();
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += e3D.getXOffset();
}
adjustedDataArea.setRect(adjustedX, adjustedY, adjustedW,
adjustedH);
}
else {
adjustedDataArea.setRect(dataArea);
}
if (isAxisLineVisible()) {
drawAxisLine(g2, cursor, adjustedDataArea, edge);
}
// draw the category labels and axis label
AxisState state = new AxisState(cursor);
if (isTickMarksVisible()) {
drawTickMarks(g2, cursor, adjustedDataArea, edge, state);
}
state = drawCategoryLabels(g2, plotArea, adjustedDataArea, edge,
state, plotState);
if (getAttributedLabel() != null) {
state = drawAttributedLabel(getAttributedLabel(), g2, plotArea,
dataArea, edge, state);
} else {
state = drawLabel(getLabel(), g2, plotArea, dataArea, edge, state);
}
return state;
}
Example 18
| Source File: NumberAxis3D.java From ccu-historian with GNU General Public License v3.0 | 4 votes |
|
/**
* Draws the axis on a Java 2D graphics device (such as the screen or a
* printer).
*
* @param g2 the graphics device.
* @param cursor the cursor.
* @param plotArea the area for drawing the axes and data.
* @param dataArea the area for drawing the data (a subset of the
* plotArea).
* @param edge the axis location.
* @param plotState collects information about the plot (<code>null</code>
* permitted).
*
* @return The updated cursor value.
*/
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
Rectangle2D dataArea, RectangleEdge edge,
PlotRenderingInfo plotState) {
// if the axis is not visible, don't draw it...
if (!isVisible()) {
AxisState state = new AxisState(cursor);
// even though the axis is not visible, we need ticks for the
// gridlines...
List ticks = refreshTicks(g2, state, dataArea, edge);
state.setTicks(ticks);
return state;
}
// calculate the adjusted data area taking into account the 3D effect...
double xOffset = 0.0;
double yOffset = 0.0;
Plot plot = getPlot();
if (plot instanceof CategoryPlot) {
CategoryPlot cp = (CategoryPlot) plot;
CategoryItemRenderer r = cp.getRenderer();
if (r instanceof Effect3D) {
Effect3D e3D = (Effect3D) r;
xOffset = e3D.getXOffset();
yOffset = e3D.getYOffset();
}
}
double adjustedX = dataArea.getMinX();
double adjustedY = dataArea.getMinY();
double adjustedW = dataArea.getWidth() - xOffset;
double adjustedH = dataArea.getHeight() - yOffset;
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += yOffset;
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += xOffset;
}
Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX,
adjustedY, adjustedW, adjustedH);
// draw the tick marks and labels...
AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea,
adjustedDataArea, edge);
if (getAttributedLabel() != null) {
info = drawAttributedLabel(getAttributedLabel(), g2, plotArea,
dataArea, edge, info);
} else {
info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info);
}
return info;
}
Example 19
| Source File: CategoryAxis3D.java From openstock with GNU General Public License v3.0 | 4 votes |
|
/**
* Returns the Java 2D coordinate for a category.
*
* @param anchor the anchor point.
* @param category the category index.
* @param categoryCount the category count.
* @param area the data area.
* @param edge the location of the axis.
*
* @return The coordinate.
*/
@Override
public double getCategoryJava2DCoordinate(CategoryAnchor anchor,
int category, int categoryCount, Rectangle2D area,
RectangleEdge edge) {
double result = 0.0;
Rectangle2D adjustedArea = area;
CategoryPlot plot = (CategoryPlot) getPlot();
CategoryItemRenderer renderer = plot.getRenderer();
if (renderer instanceof Effect3D) {
Effect3D e3D = (Effect3D) renderer;
double adjustedX = area.getMinX();
double adjustedY = area.getMinY();
double adjustedW = area.getWidth() - e3D.getXOffset();
double adjustedH = area.getHeight() - e3D.getYOffset();
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += e3D.getYOffset();
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += e3D.getXOffset();
}
adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY,
adjustedW, adjustedH);
}
if (anchor == CategoryAnchor.START) {
result = getCategoryStart(category, categoryCount, adjustedArea,
edge);
}
else if (anchor == CategoryAnchor.MIDDLE) {
result = getCategoryMiddle(category, categoryCount, adjustedArea,
edge);
}
else if (anchor == CategoryAnchor.END) {
result = getCategoryEnd(category, categoryCount, adjustedArea,
edge);
}
return result;
}
Example 20
| Source File: CategoryAxis3D.java From openstock with GNU General Public License v3.0 | 4 votes |
|
/**
* Draws the axis on a Java 2D graphics device (such as the screen or a
* printer).
*
* @param g2 the graphics device (<code>null</code> not permitted).
* @param cursor the cursor location.
* @param plotArea the area within which the axis should be drawn
* (<code>null</code> not permitted).
* @param dataArea the area within which the plot is being drawn
* (<code>null</code> not permitted).
* @param edge the location of the axis (<code>null</code> not permitted).
* @param plotState collects information about the plot (<code>null</code>
* permitted).
*
* @return The axis state (never <code>null</code>).
*/
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
Rectangle2D dataArea, RectangleEdge edge,
PlotRenderingInfo plotState) {
// if the axis is not visible, don't draw it...
if (!isVisible()) {
return new AxisState(cursor);
}
// calculate the adjusted data area taking into account the 3D effect...
// this assumes that there is a 3D renderer, all this 3D effect is a
// bit of an ugly hack...
CategoryPlot plot = (CategoryPlot) getPlot();
Rectangle2D adjustedDataArea = new Rectangle2D.Double();
if (plot.getRenderer() instanceof Effect3D) {
Effect3D e3D = (Effect3D) plot.getRenderer();
double adjustedX = dataArea.getMinX();
double adjustedY = dataArea.getMinY();
double adjustedW = dataArea.getWidth() - e3D.getXOffset();
double adjustedH = dataArea.getHeight() - e3D.getYOffset();
if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
adjustedY += e3D.getYOffset();
}
else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
adjustedX += e3D.getXOffset();
}
adjustedDataArea.setRect(adjustedX, adjustedY, adjustedW,
adjustedH);
}
else {
adjustedDataArea.setRect(dataArea);
}
if (isAxisLineVisible()) {
drawAxisLine(g2, cursor, adjustedDataArea, edge);
}
// draw the category labels and axis label
AxisState state = new AxisState(cursor);
if (isTickMarksVisible()) {
drawTickMarks(g2, cursor, adjustedDataArea, edge, state);
}
state = drawCategoryLabels(g2, plotArea, adjustedDataArea, edge,
state, plotState);
if (getAttributedLabel() != null) {
state = drawAttributedLabel(getAttributedLabel(), g2, plotArea,
dataArea, edge, state);
} else {
state = drawLabel(getLabel(), g2, plotArea, dataArea, edge, state);
}
return state;
}
