Java Code Examples for sun.java2d.pipe.Region#getHeight()

/**
 * Returns the Rectangle describing the OpenGL scissor box on the
 * Java 2D surface associated with the given Graphics object.  When a
 * third-party library is performing OpenGL rendering directly
 * into the visible region of the associated surface, this scissor box
 * must be set to avoid drawing over existing rendering results.
 *
 * Note that the x/y values in the returned Rectangle object represent
 * the lower-left corner of the scissor region, relative to the
 * lower-left corner of the given surface.
 *
 * @param g the Graphics object for the corresponding destination surface;
 * cannot be null
 * @return a Rectangle describing the OpenGL scissor box for the given
 * Graphics object and corresponding destination surface, or null if the
 * given Graphics object is invalid or the clip region is non-rectangular
 */
public static Rectangle getOGLScissorBox(Graphics g) {
    if (!(g instanceof SunGraphics2D)) {
        return null;
    }

    SunGraphics2D sg2d = (SunGraphics2D)g;
    SurfaceData sData = (SurfaceData)sg2d.surfaceData;
    Region r = sg2d.getCompClip();
    if (!r.isRectangular()) {
        // caller probably doesn't know how to handle shape clip
        // appropriately, so just return null (Swing currently never
        // sets a shape clip, but that could change in the future)
        return null;
    }

    // this is the upper-left origin of the scissor box relative to the
    // upper-left origin of the surface (in Java 2D coordinates)
    int x0 = r.getLoX();
    int y0 = r.getLoY();

    // this is the width and height of the scissor region
    int w = r.getWidth();
    int h = r.getHeight();

    // this is the lower-left origin of the scissor box relative to the
    // lower-left origin of the surface (in OpenGL coordinates)
    Rectangle surfaceBounds = sData.getBounds();
    int x1 = x0;
    int y1 = surfaceBounds.height - (y0 + h);

    return new Rectangle(x1, y1, w, h);
}
 

/**
 * Returns the Rectangle describing the OpenGL scissor box on the
 * Java 2D surface associated with the given Graphics object.  When a
 * third-party library is performing OpenGL rendering directly
 * into the visible region of the associated surface, this scissor box
 * must be set to avoid drawing over existing rendering results.
 *
 * Note that the x/y values in the returned Rectangle object represent
 * the lower-left corner of the scissor region, relative to the
 * lower-left corner of the given surface.
 *
 * @param g the Graphics object for the corresponding destination surface;
 * cannot be null
 * @return a Rectangle describing the OpenGL scissor box for the given
 * Graphics object and corresponding destination surface, or null if the
 * given Graphics object is invalid or the clip region is non-rectangular
 */
public static Rectangle getOGLScissorBox(Graphics g) {
    if (!(g instanceof SunGraphics2D)) {
        return null;
    }

    SunGraphics2D sg2d = (SunGraphics2D)g;
    SurfaceData sData = (SurfaceData)sg2d.surfaceData;
    Region r = sg2d.getCompClip();
    if (!r.isRectangular()) {
        // caller probably doesn't know how to handle shape clip
        // appropriately, so just return null (Swing currently never
        // sets a shape clip, but that could change in the future)
        return null;
    }

    // this is the upper-left origin of the scissor box relative to the
    // upper-left origin of the surface (in Java 2D coordinates)
    int x0 = r.getLoX();
    int y0 = r.getLoY();

    // this is the width and height of the scissor region
    int w = r.getWidth();
    int h = r.getHeight();

    // this is the lower-left origin of the scissor box relative to the
    // lower-left origin of the surface (in OpenGL coordinates)
    Rectangle surfaceBounds = sData.getBounds();
    int x1 = x0;
    int y1 = surfaceBounds.height - (y0 + h);

    return new Rectangle(x1, y1, w, h);
}
 

/**
 * Returns the Rectangle describing the OpenGL scissor box on the
 * Java 2D surface associated with the given Graphics object.  When a
 * third-party library is performing OpenGL rendering directly
 * into the visible region of the associated surface, this scissor box
 * must be set to avoid drawing over existing rendering results.
 *
 * Note that the x/y values in the returned Rectangle object represent
 * the lower-left corner of the scissor region, relative to the
 * lower-left corner of the given surface.
 *
 * @param g the Graphics object for the corresponding destination surface;
 * cannot be null
 * @return a Rectangle describing the OpenGL scissor box for the given
 * Graphics object and corresponding destination surface, or null if the
 * given Graphics object is invalid or the clip region is non-rectangular
 */
public static Rectangle getOGLScissorBox(Graphics g) {
    if (!(g instanceof SunGraphics2D)) {
        return null;
    }

    SunGraphics2D sg2d = (SunGraphics2D)g;
    SurfaceData sData = (SurfaceData)sg2d.surfaceData;
    Region r = sg2d.getCompClip();
    if (!r.isRectangular()) {
        // caller probably doesn't know how to handle shape clip
        // appropriately, so just return null (Swing currently never
        // sets a shape clip, but that could change in the future)
        return null;
    }

    // this is the upper-left origin of the scissor box relative to the
    // upper-left origin of the surface (in Java 2D coordinates)
    int x0 = r.getLoX();
    int y0 = r.getLoY();

    // this is the width and height of the scissor region
    int w = r.getWidth();
    int h = r.getHeight();

    // this is the lower-left origin of the scissor box relative to the
    // lower-left origin of the surface (in OpenGL coordinates)
    Rectangle surfaceBounds = sData.getBounds();
    int x1 = x0;
    int y1 = surfaceBounds.height - (y0 + h);

    return new Rectangle(x1, y1, w, h);
}
 

/**
 * Returns the Rectangle describing the OpenGL scissor box on the
 * Java 2D surface associated with the given Graphics object.  When a
 * third-party library is performing OpenGL rendering directly
 * into the visible region of the associated surface, this scissor box
 * must be set to avoid drawing over existing rendering results.
 *
 * Note that the x/y values in the returned Rectangle object represent
 * the lower-left corner of the scissor region, relative to the
 * lower-left corner of the given surface.
 *
 * @param g the Graphics object for the corresponding destination surface;
 * cannot be null
 * @return a Rectangle describing the OpenGL scissor box for the given
 * Graphics object and corresponding destination surface, or null if the
 * given Graphics object is invalid or the clip region is non-rectangular
 */
public static Rectangle getOGLScissorBox(Graphics g) {
    if (!(g instanceof SunGraphics2D)) {
        return null;
    }

    SunGraphics2D sg2d = (SunGraphics2D)g;
    SurfaceData sData = (SurfaceData)sg2d.surfaceData;
    Region r = sg2d.getCompClip();
    if (!r.isRectangular()) {
        // caller probably doesn't know how to handle shape clip
        // appropriately, so just return null (Swing currently never
        // sets a shape clip, but that could change in the future)
        return null;
    }

    // this is the upper-left origin of the scissor box relative to the
    // upper-left origin of the surface (in Java 2D coordinates)
    int x0 = r.getLoX();
    int y0 = r.getLoY();

    // this is the width and height of the scissor region
    int w = r.getWidth();
    int h = r.getHeight();

    // this is the lower-left origin of the scissor box relative to the
    // lower-left origin of the surface (in OpenGL coordinates)
    Rectangle surfaceBounds = sData.getBounds();
    int x1 = x0;
    int y1 = surfaceBounds.height - (y0 + h);

    return new Rectangle(x1, y1, w, h);
}
 

/**
 * Returns the Rectangle describing the OpenGL scissor box on the
 * Java 2D surface associated with the given Graphics object.  When a
 * third-party library is performing OpenGL rendering directly
 * into the visible region of the associated surface, this scissor box
 * must be set to avoid drawing over existing rendering results.
 *
 * Note that the x/y values in the returned Rectangle object represent
 * the lower-left corner of the scissor region, relative to the
 * lower-left corner of the given surface.
 *
 * @param g the Graphics object for the corresponding destination surface;
 * cannot be null
 * @return a Rectangle describing the OpenGL scissor box for the given
 * Graphics object and corresponding destination surface, or null if the
 * given Graphics object is invalid or the clip region is non-rectangular
 */
public static Rectangle getOGLScissorBox(Graphics g) {
    if (!(g instanceof SunGraphics2D)) {
        return null;
    }

    SunGraphics2D sg2d = (SunGraphics2D)g;
    SurfaceData sData = (SurfaceData)sg2d.surfaceData;
    Region r = sg2d.getCompClip();
    if (!r.isRectangular()) {
        // caller probably doesn't know how to handle shape clip
        // appropriately, so just return null (Swing currently never
        // sets a shape clip, but that could change in the future)
        return null;
    }

    // this is the upper-left origin of the scissor box relative to the
    // upper-left origin of the surface (in Java 2D coordinates)
    int x0 = r.getLoX();
    int y0 = r.getLoY();

    // this is the width and height of the scissor region
    int w = r.getWidth();
    int h = r.getHeight();

    // this is the lower-left origin of the scissor box relative to the
    // lower-left origin of the surface (in OpenGL coordinates)
    Rectangle surfaceBounds = sData.getBounds();
    int x1 = x0;
    int y1 = surfaceBounds.height - (y0 + h);

    return new Rectangle(x1, y1, w, h);
}
 

public AATileGenerator getAATileGenerator(double x, double y,
                                          double dx1, double dy1,
                                          double dx2, double dy2,
                                          double lw1, double lw2,
                                          Region clip,
                                          int bbox[])
{
    // REMIND: Deal with large coordinates!
    double ldx1, ldy1, ldx2, ldy2;
    boolean innerpgram = (lw1 > 0 && lw2 > 0);

    if (innerpgram) {
        ldx1 = dx1 * lw1;
        ldy1 = dy1 * lw1;
        ldx2 = dx2 * lw2;
        ldy2 = dy2 * lw2;
        x -= (ldx1 + ldx2) / 2.0;
        y -= (ldy1 + ldy2) / 2.0;
        dx1 += ldx1;
        dy1 += ldy1;
        dx2 += ldx2;
        dy2 += ldy2;
        if (lw1 > 1 && lw2 > 1) {
            // Inner parallelogram was entirely consumed by stroke...
            innerpgram = false;
        }
    } else {
        ldx1 = ldy1 = ldx2 = ldy2 = 0;
    }

    Renderer r = new Renderer(3, 3,
            clip.getLoX(), clip.getLoY(),
            clip.getWidth(), clip.getHeight(),
            PathIterator.WIND_EVEN_ODD);

    r.moveTo((float) x, (float) y);
    r.lineTo((float) (x+dx1), (float) (y+dy1));
    r.lineTo((float) (x+dx1+dx2), (float) (y+dy1+dy2));
    r.lineTo((float) (x+dx2), (float) (y+dy2));
    r.closePath();

    if (innerpgram) {
        x += ldx1 + ldx2;
        y += ldy1 + ldy2;
        dx1 -= 2.0 * ldx1;
        dy1 -= 2.0 * ldy1;
        dx2 -= 2.0 * ldx2;
        dy2 -= 2.0 * ldy2;
        r.moveTo((float) x, (float) y);
        r.lineTo((float) (x+dx1), (float) (y+dy1));
        r.lineTo((float) (x+dx1+dx2), (float) (y+dy1+dy2));
        r.lineTo((float) (x+dx2), (float) (y+dy2));
        r.closePath();
    }

    r.pathDone();

    r.endRendering();
    PiscesTileGenerator ptg = new PiscesTileGenerator(r, r.MAX_AA_ALPHA);
    ptg.getBbox(bbox);
    return ptg;
}
 

public AATileGenerator getAATileGenerator(double x, double y,
                                          double dx1, double dy1,
                                          double dx2, double dy2,
                                          double lw1, double lw2,
                                          Region clip,
                                          int bbox[])
{
    // REMIND: Deal with large coordinates!
    double ldx1, ldy1, ldx2, ldy2;
    boolean innerpgram = (lw1 > 0 && lw2 > 0);

    if (innerpgram) {
        ldx1 = dx1 * lw1;
        ldy1 = dy1 * lw1;
        ldx2 = dx2 * lw2;
        ldy2 = dy2 * lw2;
        x -= (ldx1 + ldx2) / 2.0;
        y -= (ldy1 + ldy2) / 2.0;
        dx1 += ldx1;
        dy1 += ldy1;
        dx2 += ldx2;
        dy2 += ldy2;
        if (lw1 > 1 && lw2 > 1) {
            // Inner parallelogram was entirely consumed by stroke...
            innerpgram = false;
        }
    } else {
        ldx1 = ldy1 = ldx2 = ldy2 = 0;
    }

    Renderer r = new Renderer(3, 3,
            clip.getLoX(), clip.getLoY(),
            clip.getWidth(), clip.getHeight(),
            PathIterator.WIND_EVEN_ODD);

    r.moveTo((float) x, (float) y);
    r.lineTo((float) (x+dx1), (float) (y+dy1));
    r.lineTo((float) (x+dx1+dx2), (float) (y+dy1+dy2));
    r.lineTo((float) (x+dx2), (float) (y+dy2));
    r.closePath();

    if (innerpgram) {
        x += ldx1 + ldx2;
        y += ldy1 + ldy2;
        dx1 -= 2.0 * ldx1;
        dy1 -= 2.0 * ldy1;
        dx2 -= 2.0 * ldx2;
        dy2 -= 2.0 * ldy2;
        r.moveTo((float) x, (float) y);
        r.lineTo((float) (x+dx1), (float) (y+dy1));
        r.lineTo((float) (x+dx1+dx2), (float) (y+dy1+dy2));
        r.lineTo((float) (x+dx2), (float) (y+dy2));
        r.closePath();
    }

    r.pathDone();

    r.endRendering();
    PiscesTileGenerator ptg = new PiscesTileGenerator(r, r.MAX_AA_ALPHA);
    ptg.getBbox(bbox);
    return ptg;
}
 

public void Blit(SurfaceData src, SurfaceData dst,
                 Composite comp, Region clip,
                 int sx, int sy, int dx, int dy,
                 int w, int h)
{
    if (clip != null) {
        clip = clip.getIntersectionXYWH(dx, dy, w, h);
        // At the end this method will flush the RenderQueue, we should exit
        // from it as soon as possible.
        if (clip.isEmpty()) {
            return;
        }
        sx += clip.getLoX() - dx;
        sy += clip.getLoY() - dy;
        dx = clip.getLoX();
        dy = clip.getLoY();
        w = clip.getWidth();
        h = clip.getHeight();

        if (!clip.isRectangular()) {
            complexClipBlit(src, dst, comp, clip, sx, sy, dx, dy, w, h);
            return;
        }
    }

    OGLRenderQueue rq = OGLRenderQueue.getInstance();
    rq.lock();
    try {
        // make sure the RenderQueue keeps a hard reference to the
        // destination (sysmem) SurfaceData to prevent it from being
        // disposed while the operation is processed on the QFT
        rq.addReference(dst);

        RenderBuffer buf = rq.getBuffer();
        OGLContext.validateContext((OGLSurfaceData)src);

        rq.ensureCapacityAndAlignment(48, 32);
        buf.putInt(SURFACE_TO_SW_BLIT);
        buf.putInt(sx).putInt(sy);
        buf.putInt(dx).putInt(dy);
        buf.putInt(w).putInt(h);
        buf.putInt(typeval);
        buf.putLong(src.getNativeOps());
        buf.putLong(dst.getNativeOps());

        // always flush immediately
        rq.flushNow();
    } finally {
        rq.unlock();
    }
}
 

public void Blit(SurfaceData src, SurfaceData dst,
                 Composite comp, Region clip,
                 int sx, int sy, int dx, int dy,
                 int w, int h)
{
    if (clip != null) {
        clip = clip.getIntersectionXYWH(dx, dy, w, h);
        // At the end this method will flush the RenderQueue, we should exit
        // from it as soon as possible.
        if (clip.isEmpty()) {
            return;
        }
        sx += clip.getLoX() - dx;
        sy += clip.getLoY() - dy;
        dx = clip.getLoX();
        dy = clip.getLoY();
        w = clip.getWidth();
        h = clip.getHeight();

        if (!clip.isRectangular()) {
            complexClipBlit(src, dst, comp, clip, sx, sy, dx, dy, w, h);
            return;
        }
    }

    OGLRenderQueue rq = OGLRenderQueue.getInstance();
    rq.lock();
    try {
        // make sure the RenderQueue keeps a hard reference to the
        // destination (sysmem) SurfaceData to prevent it from being
        // disposed while the operation is processed on the QFT
        rq.addReference(dst);

        RenderBuffer buf = rq.getBuffer();
        OGLContext.validateContext((OGLSurfaceData)src);

        rq.ensureCapacityAndAlignment(48, 32);
        buf.putInt(SURFACE_TO_SW_BLIT);
        buf.putInt(sx).putInt(sy);
        buf.putInt(dx).putInt(dy);
        buf.putInt(w).putInt(h);
        buf.putInt(typeval);
        buf.putLong(src.getNativeOps());
        buf.putLong(dst.getNativeOps());

        // always flush immediately
        rq.flushNow();
    } finally {
        rq.unlock();
    }
}
 

public void Blit(SurfaceData src, SurfaceData dst,
                 Composite comp, Region clip,
                 int sx, int sy, int dx, int dy,
                 int w, int h)
{
    if (clip != null) {
        clip = clip.getIntersectionXYWH(dx, dy, w, h);
        // At the end this method will flush the RenderQueue, we should exit
        // from it as soon as possible.
        if (clip.isEmpty()) {
            return;
        }
        sx += clip.getLoX() - dx;
        sy += clip.getLoY() - dy;
        dx = clip.getLoX();
        dy = clip.getLoY();
        w = clip.getWidth();
        h = clip.getHeight();

        if (!clip.isRectangular()) {
            complexClipBlit(src, dst, comp, clip, sx, sy, dx, dy, w, h);
            return;
        }
    }

    OGLRenderQueue rq = OGLRenderQueue.getInstance();
    rq.lock();
    try {
        // make sure the RenderQueue keeps a hard reference to the
        // destination (sysmem) SurfaceData to prevent it from being
        // disposed while the operation is processed on the QFT
        rq.addReference(dst);

        RenderBuffer buf = rq.getBuffer();
        OGLContext.validateContext((OGLSurfaceData)src);

        rq.ensureCapacityAndAlignment(48, 32);
        buf.putInt(SURFACE_TO_SW_BLIT);
        buf.putInt(sx).putInt(sy);
        buf.putInt(dx).putInt(dy);
        buf.putInt(w).putInt(h);
        buf.putInt(typeval);
        buf.putLong(src.getNativeOps());
        buf.putLong(dst.getNativeOps());

        // always flush immediately
        rq.flushNow();
    } finally {
        rq.unlock();
    }
}
 

public void Blit(SurfaceData src, SurfaceData dst,
                 Composite comp, Region clip,
                 int sx, int sy, int dx, int dy,
                 int w, int h)
{
    if (clip != null) {
        clip = clip.getIntersectionXYWH(dx, dy, w, h);
        // At the end this method will flush the RenderQueue, we should exit
        // from it as soon as possible.
        if (clip.isEmpty()) {
            return;
        }
        sx += clip.getLoX() - dx;
        sy += clip.getLoY() - dy;
        dx = clip.getLoX();
        dy = clip.getLoY();
        w = clip.getWidth();
        h = clip.getHeight();

        if (!clip.isRectangular()) {
            complexClipBlit(src, dst, comp, clip, sx, sy, dx, dy, w, h);
            return;
        }
    }

    OGLRenderQueue rq = OGLRenderQueue.getInstance();
    rq.lock();
    try {
        // make sure the RenderQueue keeps a hard reference to the
        // destination (sysmem) SurfaceData to prevent it from being
        // disposed while the operation is processed on the QFT
        rq.addReference(dst);

        RenderBuffer buf = rq.getBuffer();
        OGLContext.validateContext((OGLSurfaceData)src);

        rq.ensureCapacityAndAlignment(48, 32);
        buf.putInt(SURFACE_TO_SW_BLIT);
        buf.putInt(sx).putInt(sy);
        buf.putInt(dx).putInt(dy);
        buf.putInt(w).putInt(h);
        buf.putInt(typeval);
        buf.putLong(src.getNativeOps());
        buf.putLong(dst.getNativeOps());

        // always flush immediately
        rq.flushNow();
    } finally {
        rq.unlock();
    }
}
 

public AATileGenerator getAATileGenerator(double x, double y,
                                          double dx1, double dy1,
                                          double dx2, double dy2,
                                          double lw1, double lw2,
                                          Region clip,
                                          int bbox[])
{
    // REMIND: Deal with large coordinates!
    double ldx1, ldy1, ldx2, ldy2;
    boolean innerpgram = (lw1 > 0 && lw2 > 0);

    if (innerpgram) {
        ldx1 = dx1 * lw1;
        ldy1 = dy1 * lw1;
        ldx2 = dx2 * lw2;
        ldy2 = dy2 * lw2;
        x -= (ldx1 + ldx2) / 2.0;
        y -= (ldy1 + ldy2) / 2.0;
        dx1 += ldx1;
        dy1 += ldy1;
        dx2 += ldx2;
        dy2 += ldy2;
        if (lw1 > 1 && lw2 > 1) {
            // Inner parallelogram was entirely consumed by stroke...
            innerpgram = false;
        }
    } else {
        ldx1 = ldy1 = ldx2 = ldy2 = 0;
    }

    Renderer r = new Renderer(3, 3,
            clip.getLoX(), clip.getLoY(),
            clip.getWidth(), clip.getHeight(),
            PathIterator.WIND_EVEN_ODD);

    r.moveTo((float) x, (float) y);
    r.lineTo((float) (x+dx1), (float) (y+dy1));
    r.lineTo((float) (x+dx1+dx2), (float) (y+dy1+dy2));
    r.lineTo((float) (x+dx2), (float) (y+dy2));
    r.closePath();

    if (innerpgram) {
        x += ldx1 + ldx2;
        y += ldy1 + ldy2;
        dx1 -= 2.0 * ldx1;
        dy1 -= 2.0 * ldy1;
        dx2 -= 2.0 * ldx2;
        dy2 -= 2.0 * ldy2;
        r.moveTo((float) x, (float) y);
        r.lineTo((float) (x+dx1), (float) (y+dy1));
        r.lineTo((float) (x+dx1+dx2), (float) (y+dy1+dy2));
        r.lineTo((float) (x+dx2), (float) (y+dy2));
        r.closePath();
    }

    r.pathDone();

    r.endRendering();
    PiscesTileGenerator ptg = new PiscesTileGenerator(r, r.MAX_AA_ALPHA);
    ptg.getBbox(bbox);
    return ptg;
}
 

public AATileGenerator getAATileGenerator(double x, double y,
                                          double dx1, double dy1,
                                          double dx2, double dy2,
                                          double lw1, double lw2,
                                          Region clip,
                                          int bbox[])
{
    // REMIND: Deal with large coordinates!
    double ldx1, ldy1, ldx2, ldy2;
    boolean innerpgram = (lw1 > 0 && lw2 > 0);

    if (innerpgram) {
        ldx1 = dx1 * lw1;
        ldy1 = dy1 * lw1;
        ldx2 = dx2 * lw2;
        ldy2 = dy2 * lw2;
        x -= (ldx1 + ldx2) / 2.0;
        y -= (ldy1 + ldy2) / 2.0;
        dx1 += ldx1;
        dy1 += ldy1;
        dx2 += ldx2;
        dy2 += ldy2;
        if (lw1 > 1 && lw2 > 1) {
            // Inner parallelogram was entirely consumed by stroke...
            innerpgram = false;
        }
    } else {
        ldx1 = ldy1 = ldx2 = ldy2 = 0;
    }

    Renderer r = new Renderer(3, 3,
            clip.getLoX(), clip.getLoY(),
            clip.getWidth(), clip.getHeight(),
            PathIterator.WIND_EVEN_ODD);

    r.moveTo((float) x, (float) y);
    r.lineTo((float) (x+dx1), (float) (y+dy1));
    r.lineTo((float) (x+dx1+dx2), (float) (y+dy1+dy2));
    r.lineTo((float) (x+dx2), (float) (y+dy2));
    r.closePath();

    if (innerpgram) {
        x += ldx1 + ldx2;
        y += ldy1 + ldy2;
        dx1 -= 2.0 * ldx1;
        dy1 -= 2.0 * ldy1;
        dx2 -= 2.0 * ldx2;
        dy2 -= 2.0 * ldy2;
        r.moveTo((float) x, (float) y);
        r.lineTo((float) (x+dx1), (float) (y+dy1));
        r.lineTo((float) (x+dx1+dx2), (float) (y+dy1+dy2));
        r.lineTo((float) (x+dx2), (float) (y+dy2));
        r.closePath();
    }

    r.pathDone();

    r.endRendering();
    PiscesTileGenerator ptg = new PiscesTileGenerator(r, r.MAX_AA_ALPHA);
    ptg.getBbox(bbox);
    return ptg;
}
 

public AATileGenerator getAATileGenerator(double x, double y,
                                          double dx1, double dy1,
                                          double dx2, double dy2,
                                          double lw1, double lw2,
                                          Region clip,
                                          int bbox[])
{
    // REMIND: Deal with large coordinates!
    double ldx1, ldy1, ldx2, ldy2;
    boolean innerpgram = (lw1 > 0 && lw2 > 0);

    if (innerpgram) {
        ldx1 = dx1 * lw1;
        ldy1 = dy1 * lw1;
        ldx2 = dx2 * lw2;
        ldy2 = dy2 * lw2;
        x -= (ldx1 + ldx2) / 2.0;
        y -= (ldy1 + ldy2) / 2.0;
        dx1 += ldx1;
        dy1 += ldy1;
        dx2 += ldx2;
        dy2 += ldy2;
        if (lw1 > 1 && lw2 > 1) {
            // Inner parallelogram was entirely consumed by stroke...
            innerpgram = false;
        }
    } else {
        ldx1 = ldy1 = ldx2 = ldy2 = 0;
    }

    Renderer r = new Renderer(3, 3,
            clip.getLoX(), clip.getLoY(),
            clip.getWidth(), clip.getHeight(),
            PathIterator.WIND_EVEN_ODD);

    r.moveTo((float) x, (float) y);
    r.lineTo((float) (x+dx1), (float) (y+dy1));
    r.lineTo((float) (x+dx1+dx2), (float) (y+dy1+dy2));
    r.lineTo((float) (x+dx2), (float) (y+dy2));
    r.closePath();

    if (innerpgram) {
        x += ldx1 + ldx2;
        y += ldy1 + ldy2;
        dx1 -= 2.0 * ldx1;
        dy1 -= 2.0 * ldy1;
        dx2 -= 2.0 * ldx2;
        dy2 -= 2.0 * ldy2;
        r.moveTo((float) x, (float) y);
        r.lineTo((float) (x+dx1), (float) (y+dy1));
        r.lineTo((float) (x+dx1+dx2), (float) (y+dy1+dy2));
        r.lineTo((float) (x+dx2), (float) (y+dy2));
        r.closePath();
    }

    r.pathDone();

    r.endRendering();
    PiscesTileGenerator ptg = new PiscesTileGenerator(r, r.MAX_AA_ALPHA);
    ptg.getBbox(bbox);
    return ptg;
}
 

/**
 * Construct an antialiased tile generator for the given shape with
 * the given rendering attributes and store the bounds of the tile
 * iteration in the bbox parameter.
 * The {@code at} parameter specifies a transform that should affect
 * both the shape and the {@code BasicStroke} attributes.
 * The {@code clip} parameter specifies the current clip in effect
 * in device coordinates and can be used to prune the data for the
 * operation, but the renderer is not required to perform any
 * clipping.
 * If the {@code BasicStroke} parameter is null then the shape
 * should be filled as is, otherwise the attributes of the
 * {@code BasicStroke} should be used to specify a draw operation.
 * The {@code thin} parameter indicates whether or not the
 * transformed {@code BasicStroke} represents coordinates smaller
 * than the minimum resolution of the antialiasing rasterizer as
 * specified by the {@code getMinimumAAPenWidth()} method.
 * <p>
 * Upon returning, this method will fill the {@code bbox} parameter
 * with 4 values indicating the bounds of the iteration of the
 * tile generator.
 * The iteration order of the tiles will be as specified by the
 * pseudo-code:
 * <pre>
 *     for (y = bbox[1]; y < bbox[3]; y += tileheight) {
 *         for (x = bbox[0]; x < bbox[2]; x += tilewidth) {
 *         }
 *     }
 * </pre>
 * If there is no output to be rendered, this method may return
 * null.
 *
 * @param s the shape to be rendered (fill or draw)
 * @param at the transform to be applied to the shape and the
 *           stroke attributes
 * @param clip the current clip in effect in device coordinates
 * @param bs if non-null, a {@code BasicStroke} whose attributes
 *           should be applied to this operation
 * @param thin true if the transformed stroke attributes are smaller
 *             than the minimum dropout pen width
 * @param normalize true if the {@code VALUE_STROKE_NORMALIZE}
 *                  {@code RenderingHint} is in effect
 * @param bbox returns the bounds of the iteration
 * @return the {@code AATileGenerator} instance to be consulted
 *         for tile coverages, or null if there is no output to render
 * @since 1.7
 */
public AATileGenerator getAATileGenerator(Shape s,
                                          AffineTransform at,
                                          Region clip,
                                          BasicStroke bs,
                                          boolean thin,
                                          boolean normalize,
                                          int bbox[])
{
    Renderer r;
    NormMode norm = (normalize) ? NormMode.ON_WITH_AA : NormMode.OFF;
    if (bs == null) {
        PathIterator pi;
        if (normalize) {
            pi = new NormalizingPathIterator(s.getPathIterator(at), norm);
        } else {
            pi = s.getPathIterator(at);
        }
        r = new Renderer(3, 3,
                         clip.getLoX(), clip.getLoY(),
                         clip.getWidth(), clip.getHeight(),
                         pi.getWindingRule());
        pathTo(pi, r);
    } else {
        r = new Renderer(3, 3,
                         clip.getLoX(), clip.getLoY(),
                         clip.getWidth(), clip.getHeight(),
                         PathIterator.WIND_NON_ZERO);
        strokeTo(s, at, bs, thin, norm, true, r);
    }
    r.endRendering();
    PiscesTileGenerator ptg = new PiscesTileGenerator(r, r.MAX_AA_ALPHA);
    ptg.getBbox(bbox);
    return ptg;
}
 

/**
 * Construct an antialiased tile generator for the given shape with
 * the given rendering attributes and store the bounds of the tile
 * iteration in the bbox parameter.
 * The {@code at} parameter specifies a transform that should affect
 * both the shape and the {@code BasicStroke} attributes.
 * The {@code clip} parameter specifies the current clip in effect
 * in device coordinates and can be used to prune the data for the
 * operation, but the renderer is not required to perform any
 * clipping.
 * If the {@code BasicStroke} parameter is null then the shape
 * should be filled as is, otherwise the attributes of the
 * {@code BasicStroke} should be used to specify a draw operation.
 * The {@code thin} parameter indicates whether or not the
 * transformed {@code BasicStroke} represents coordinates smaller
 * than the minimum resolution of the antialiasing rasterizer as
 * specified by the {@code getMinimumAAPenWidth()} method.
 * <p>
 * Upon returning, this method will fill the {@code bbox} parameter
 * with 4 values indicating the bounds of the iteration of the
 * tile generator.
 * The iteration order of the tiles will be as specified by the
 * pseudo-code:
 * <pre>
 *     for (y = bbox[1]; y < bbox[3]; y += tileheight) {
 *         for (x = bbox[0]; x < bbox[2]; x += tilewidth) {
 *         }
 *     }
 * </pre>
 * If there is no output to be rendered, this method may return
 * null.
 *
 * @param s the shape to be rendered (fill or draw)
 * @param at the transform to be applied to the shape and the
 *           stroke attributes
 * @param clip the current clip in effect in device coordinates
 * @param bs if non-null, a {@code BasicStroke} whose attributes
 *           should be applied to this operation
 * @param thin true if the transformed stroke attributes are smaller
 *             than the minimum dropout pen width
 * @param normalize true if the {@code VALUE_STROKE_NORMALIZE}
 *                  {@code RenderingHint} is in effect
 * @param bbox returns the bounds of the iteration
 * @return the {@code AATileGenerator} instance to be consulted
 *         for tile coverages, or null if there is no output to render
 * @since 1.7
 */
public AATileGenerator getAATileGenerator(Shape s,
                                          AffineTransform at,
                                          Region clip,
                                          BasicStroke bs,
                                          boolean thin,
                                          boolean normalize,
                                          int bbox[])
{
    Renderer r;
    NormMode norm = (normalize) ? NormMode.ON_WITH_AA : NormMode.OFF;
    if (bs == null) {
        PathIterator pi;
        if (normalize) {
            pi = new NormalizingPathIterator(s.getPathIterator(at), norm);
        } else {
            pi = s.getPathIterator(at);
        }
        r = new Renderer(3, 3,
                         clip.getLoX(), clip.getLoY(),
                         clip.getWidth(), clip.getHeight(),
                         pi.getWindingRule());
        pathTo(pi, r);
    } else {
        r = new Renderer(3, 3,
                         clip.getLoX(), clip.getLoY(),
                         clip.getWidth(), clip.getHeight(),
                         PathIterator.WIND_NON_ZERO);
        strokeTo(s, at, bs, thin, norm, true, r);
    }
    r.endRendering();
    PiscesTileGenerator ptg = new PiscesTileGenerator(r, r.MAX_AA_ALPHA);
    ptg.getBbox(bbox);
    return ptg;
}
 

/**
 * Construct an antialiased tile generator for the given shape with
 * the given rendering attributes and store the bounds of the tile
 * iteration in the bbox parameter.
 * The {@code at} parameter specifies a transform that should affect
 * both the shape and the {@code BasicStroke} attributes.
 * The {@code clip} parameter specifies the current clip in effect
 * in device coordinates and can be used to prune the data for the
 * operation, but the renderer is not required to perform any
 * clipping.
 * If the {@code BasicStroke} parameter is null then the shape
 * should be filled as is, otherwise the attributes of the
 * {@code BasicStroke} should be used to specify a draw operation.
 * The {@code thin} parameter indicates whether or not the
 * transformed {@code BasicStroke} represents coordinates smaller
 * than the minimum resolution of the antialiasing rasterizer as
 * specified by the {@code getMinimumAAPenWidth()} method.
 * <p>
 * Upon returning, this method will fill the {@code bbox} parameter
 * with 4 values indicating the bounds of the iteration of the
 * tile generator.
 * The iteration order of the tiles will be as specified by the
 * pseudo-code:
 * <pre>
 *     for (y = bbox[1]; y < bbox[3]; y += tileheight) {
 *         for (x = bbox[0]; x < bbox[2]; x += tilewidth) {
 *         }
 *     }
 * </pre>
 * If there is no output to be rendered, this method may return
 * null.
 *
 * @param s the shape to be rendered (fill or draw)
 * @param at the transform to be applied to the shape and the
 *           stroke attributes
 * @param clip the current clip in effect in device coordinates
 * @param bs if non-null, a {@code BasicStroke} whose attributes
 *           should be applied to this operation
 * @param thin true if the transformed stroke attributes are smaller
 *             than the minimum dropout pen width
 * @param normalize true if the {@code VALUE_STROKE_NORMALIZE}
 *                  {@code RenderingHint} is in effect
 * @param bbox returns the bounds of the iteration
 * @return the {@code AATileGenerator} instance to be consulted
 *         for tile coverages, or null if there is no output to render
 * @since 1.7
 */
public AATileGenerator getAATileGenerator(Shape s,
                                          AffineTransform at,
                                          Region clip,
                                          BasicStroke bs,
                                          boolean thin,
                                          boolean normalize,
                                          int bbox[])
{
    Renderer r;
    NormMode norm = (normalize) ? NormMode.ON_WITH_AA : NormMode.OFF;
    if (bs == null) {
        PathIterator pi;
        if (normalize) {
            pi = new NormalizingPathIterator(s.getPathIterator(at), norm);
        } else {
            pi = s.getPathIterator(at);
        }
        r = new Renderer(3, 3,
                         clip.getLoX(), clip.getLoY(),
                         clip.getWidth(), clip.getHeight(),
                         pi.getWindingRule());
        pathTo(pi, r);
    } else {
        r = new Renderer(3, 3,
                         clip.getLoX(), clip.getLoY(),
                         clip.getWidth(), clip.getHeight(),
                         PathIterator.WIND_NON_ZERO);
        strokeTo(s, at, bs, thin, norm, true, r);
    }
    r.endRendering();
    PiscesTileGenerator ptg = new PiscesTileGenerator(r, r.MAX_AA_ALPHA);
    ptg.getBbox(bbox);
    return ptg;
}
 

/**
 * Construct an antialiased tile generator for the given shape with
 * the given rendering attributes and store the bounds of the tile
 * iteration in the bbox parameter.
 * The {@code at} parameter specifies a transform that should affect
 * both the shape and the {@code BasicStroke} attributes.
 * The {@code clip} parameter specifies the current clip in effect
 * in device coordinates and can be used to prune the data for the
 * operation, but the renderer is not required to perform any
 * clipping.
 * If the {@code BasicStroke} parameter is null then the shape
 * should be filled as is, otherwise the attributes of the
 * {@code BasicStroke} should be used to specify a draw operation.
 * The {@code thin} parameter indicates whether or not the
 * transformed {@code BasicStroke} represents coordinates smaller
 * than the minimum resolution of the antialiasing rasterizer as
 * specified by the {@code getMinimumAAPenWidth()} method.
 * <p>
 * Upon returning, this method will fill the {@code bbox} parameter
 * with 4 values indicating the bounds of the iteration of the
 * tile generator.
 * The iteration order of the tiles will be as specified by the
 * pseudo-code:
 * <pre>
 *     for (y = bbox[1]; y < bbox[3]; y += tileheight) {
 *         for (x = bbox[0]; x < bbox[2]; x += tilewidth) {
 *         }
 *     }
 * </pre>
 * If there is no output to be rendered, this method may return
 * null.
 *
 * @param s the shape to be rendered (fill or draw)
 * @param at the transform to be applied to the shape and the
 *           stroke attributes
 * @param clip the current clip in effect in device coordinates
 * @param bs if non-null, a {@code BasicStroke} whose attributes
 *           should be applied to this operation
 * @param thin true if the transformed stroke attributes are smaller
 *             than the minimum dropout pen width
 * @param normalize true if the {@code VALUE_STROKE_NORMALIZE}
 *                  {@code RenderingHint} is in effect
 * @param bbox returns the bounds of the iteration
 * @return the {@code AATileGenerator} instance to be consulted
 *         for tile coverages, or null if there is no output to render
 * @since 1.7
 */
public AATileGenerator getAATileGenerator(Shape s,
                                          AffineTransform at,
                                          Region clip,
                                          BasicStroke bs,
                                          boolean thin,
                                          boolean normalize,
                                          int bbox[])
{
    Renderer r;
    NormMode norm = (normalize) ? NormMode.ON_WITH_AA : NormMode.OFF;
    if (bs == null) {
        PathIterator pi;
        if (normalize) {
            pi = new NormalizingPathIterator(s.getPathIterator(at), norm);
        } else {
            pi = s.getPathIterator(at);
        }
        r = new Renderer(3, 3,
                         clip.getLoX(), clip.getLoY(),
                         clip.getWidth(), clip.getHeight(),
                         pi.getWindingRule());
        pathTo(pi, r);
    } else {
        r = new Renderer(3, 3,
                         clip.getLoX(), clip.getLoY(),
                         clip.getWidth(), clip.getHeight(),
                         PathIterator.WIND_NON_ZERO);
        strokeTo(s, at, bs, thin, norm, true, r);
    }
    r.endRendering();
    PiscesTileGenerator ptg = new PiscesTileGenerator(r, r.MAX_AA_ALPHA);
    ptg.getBbox(bbox);
    return ptg;
}
 

/**
 * Construct an antialiased tile generator for the given shape with
 * the given rendering attributes and store the bounds of the tile
 * iteration in the bbox parameter.
 * The {@code at} parameter specifies a transform that should affect
 * both the shape and the {@code BasicStroke} attributes.
 * The {@code clip} parameter specifies the current clip in effect
 * in device coordinates and can be used to prune the data for the
 * operation, but the renderer is not required to perform any
 * clipping.
 * If the {@code BasicStroke} parameter is null then the shape
 * should be filled as is, otherwise the attributes of the
 * {@code BasicStroke} should be used to specify a draw operation.
 * The {@code thin} parameter indicates whether or not the
 * transformed {@code BasicStroke} represents coordinates smaller
 * than the minimum resolution of the antialiasing rasterizer as
 * specified by the {@code getMinimumAAPenWidth()} method.
 * <p>
 * Upon returning, this method will fill the {@code bbox} parameter
 * with 4 values indicating the bounds of the iteration of the
 * tile generator.
 * The iteration order of the tiles will be as specified by the
 * pseudo-code:
 * <pre>
 *     for (y = bbox[1]; y < bbox[3]; y += tileheight) {
 *         for (x = bbox[0]; x < bbox[2]; x += tilewidth) {
 *         }
 *     }
 * </pre>
 * If there is no output to be rendered, this method may return
 * null.
 *
 * @param s the shape to be rendered (fill or draw)
 * @param at the transform to be applied to the shape and the
 *           stroke attributes
 * @param clip the current clip in effect in device coordinates
 * @param bs if non-null, a {@code BasicStroke} whose attributes
 *           should be applied to this operation
 * @param thin true if the transformed stroke attributes are smaller
 *             than the minimum dropout pen width
 * @param normalize true if the {@code VALUE_STROKE_NORMALIZE}
 *                  {@code RenderingHint} is in effect
 * @param bbox returns the bounds of the iteration
 * @return the {@code AATileGenerator} instance to be consulted
 *         for tile coverages, or null if there is no output to render
 * @since 1.7
 */
public AATileGenerator getAATileGenerator(Shape s,
                                          AffineTransform at,
                                          Region clip,
                                          BasicStroke bs,
                                          boolean thin,
                                          boolean normalize,
                                          int bbox[])
{
    Renderer r;
    NormMode norm = (normalize) ? NormMode.ON_WITH_AA : NormMode.OFF;
    if (bs == null) {
        PathIterator pi;
        if (normalize) {
            pi = new NormalizingPathIterator(s.getPathIterator(at), norm);
        } else {
            pi = s.getPathIterator(at);
        }
        r = new Renderer(3, 3,
                         clip.getLoX(), clip.getLoY(),
                         clip.getWidth(), clip.getHeight(),
                         pi.getWindingRule());
        pathTo(pi, r);
    } else {
        r = new Renderer(3, 3,
                         clip.getLoX(), clip.getLoY(),
                         clip.getWidth(), clip.getHeight(),
                         PathIterator.WIND_NON_ZERO);
        strokeTo(s, at, bs, thin, norm, true, r);
    }
    r.endRendering();
    PiscesTileGenerator ptg = new PiscesTileGenerator(r, r.MAX_AA_ALPHA);
    ptg.getBbox(bbox);
    return ptg;
}
 

/**
 * Construct an antialiased tile generator for the given shape with
 * the given rendering attributes and store the bounds of the tile
 * iteration in the bbox parameter.
 * The {@code at} parameter specifies a transform that should affect
 * both the shape and the {@code BasicStroke} attributes.
 * The {@code clip} parameter specifies the current clip in effect
 * in device coordinates and can be used to prune the data for the
 * operation, but the renderer is not required to perform any
 * clipping.
 * If the {@code BasicStroke} parameter is null then the shape
 * should be filled as is, otherwise the attributes of the
 * {@code BasicStroke} should be used to specify a draw operation.
 * The {@code thin} parameter indicates whether or not the
 * transformed {@code BasicStroke} represents coordinates smaller
 * than the minimum resolution of the antialiasing rasterizer as
 * specified by the {@code getMinimumAAPenWidth()} method.
 * <p>
 * Upon returning, this method will fill the {@code bbox} parameter
 * with 4 values indicating the bounds of the iteration of the
 * tile generator.
 * The iteration order of the tiles will be as specified by the
 * pseudo-code:
 * <pre>
 *     for (y = bbox[1]; y < bbox[3]; y += tileheight) {
 *         for (x = bbox[0]; x < bbox[2]; x += tilewidth) {
 *         }
 *     }
 * </pre>
 * If there is no output to be rendered, this method may return
 * null.
 *
 * @param s the shape to be rendered (fill or draw)
 * @param at the transform to be applied to the shape and the
 *           stroke attributes
 * @param clip the current clip in effect in device coordinates
 * @param bs if non-null, a {@code BasicStroke} whose attributes
 *           should be applied to this operation
 * @param thin true if the transformed stroke attributes are smaller
 *             than the minimum dropout pen width
 * @param normalize true if the {@code VALUE_STROKE_NORMALIZE}
 *                  {@code RenderingHint} is in effect
 * @param bbox returns the bounds of the iteration
 * @return the {@code AATileGenerator} instance to be consulted
 *         for tile coverages, or null if there is no output to render
 * @since 1.7
 */
public AATileGenerator getAATileGenerator(Shape s,
                                          AffineTransform at,
                                          Region clip,
                                          BasicStroke bs,
                                          boolean thin,
                                          boolean normalize,
                                          int bbox[])
{
    Renderer r;
    NormMode norm = (normalize) ? NormMode.ON_WITH_AA : NormMode.OFF;
    if (bs == null) {
        PathIterator pi;
        if (normalize) {
            pi = new NormalizingPathIterator(s.getPathIterator(at), norm);
        } else {
            pi = s.getPathIterator(at);
        }
        r = new Renderer(3, 3,
                         clip.getLoX(), clip.getLoY(),
                         clip.getWidth(), clip.getHeight(),
                         pi.getWindingRule());
        pathTo(pi, r);
    } else {
        r = new Renderer(3, 3,
                         clip.getLoX(), clip.getLoY(),
                         clip.getWidth(), clip.getHeight(),
                         PathIterator.WIND_NON_ZERO);
        strokeTo(s, at, bs, thin, norm, true, r);
    }
    r.endRendering();
    PiscesTileGenerator ptg = new PiscesTileGenerator(r, r.MAX_AA_ALPHA);
    ptg.getBbox(bbox);
    return ptg;
}