Java Code Examples for com.codeborne.selenide.Selenide#sleep()

/**
 * Drag and drop an element to a given position. The position will be set by the user. It drags the element and
 * moves it to a specific position of the respective slider.
 * 
 * @param elementToMove
 *            The selector of the slider to drag and drop
 * @param elementToCheck
 *            The locator of the slider value
 * @param horizontalMovement
 *            The offset for the horizontal movement
 * @param verticalMovement
 *            The offset for the vertical movement
 * @param pauseBetweenMovements
 *            Time to pass after the slider do the next movement step
 * @param retryMovements
 *            Amount of retries the slider will be moved
 * @param condition
 *            The condition for the slider to verify the movement
 */

public static void dragAndDropUntilCondition(SelenideElement elementToMove, SelenideElement elementToCheck, int horizontalMovement, int verticalMovement,
                                             int pauseBetweenMovements, int retryMovements, Condition condition)
{
    Actions moveSlider = new Actions(Neodymium.getDriver());

    int counter = 0;
    while (!elementToCheck.has(condition))
    {
        if (counter > retryMovements)
        {
            SelenideAddons.wrapAssertionError(() -> {
                Assert.assertTrue("CircutBreaker: Was not able to move the element and to reach the condition. Tried: " + retryMovements
                                  + " times to move the element.", false);
            });
        }
        Action action = moveSlider.dragAndDropBy(elementToMove.getWrappedElement(), horizontalMovement, verticalMovement).build();
        action.perform();
        Selenide.sleep(pauseBetweenMovements);
        counter++;
    }
}
 

/**
 * Executes the given code at least once but potentially multiple times as long as a
 * {@link StaleElementReferenceException} occurs.
 * <p>
 * Attention: Since the SelenideElement class implements the InvocationHandler interface you have to make sure that
 * the element is retrieved in order to provoke a StaleElementReferenceException. You can do this by calling a
 * should function that uses a condition.
 * </p>
 * <p>
 * The following settings can be configured within the Neodymium configuration to tune the retry behavior:
 * </p>
 * <ul>
 * <li>neodymium.selenideAddons.staleElement.retry.count (default 3 retries)</li>
 * <li>neodymium.selenideAddons.staleElement.retry.timeout (default 500ms pause between retries)</li>
 * </ul>
 * <p>
 * <b>Example:</b>
 * </p>
 * 
 * <pre>
 * SelenideAddons.$safe(() -&gt; {
 *     return $("selector").should(exist);
 * });
 * </pre>
 *
 * @param code
 *            the code to run
 * @return the element of the execution or any exception that might bubble up
 */
public static SelenideElement $safe(final Supplier<SelenideElement> code)
{
    final int maxRetryCount = Neodymium.configuration().staleElementRetryCount();
    int retryCounter = 0;

    while (retryCounter <= maxRetryCount)
    {
        try
        {
            return code.get();
        }
        catch (final Throwable t)
        {
            if (isThrowableCausedBy(t, StaleElementReferenceException.class))
            {
                retryCounter++;
                if (retryCounter > maxRetryCount)
                {
                    // fail
                    throw t;
                }
                else
                {
                    AllureAddons.addToReport("StaleElementReferenceException catched times: \"" + retryCounter + "\".", retryCounter);
                    Selenide.sleep(Neodymium.configuration().staleElementRetryTimeout());
                }
            }
            else
            {
                // not the kind of error we are looking for
                throw t;
            }
        }
    }

    // never get here
    return null;
}
 

/**
 * Executes the given code at least once but potentially multiple times as long as a
 * {@link StaleElementReferenceException} occurs.
 * <p>
 * The following settings can be configured within the Neodymium configuration to tune the retry behavior:
 * </p>
 * <ul>
 * <li>neodymium.selenideAddons.staleElement.retry.count (default 3 retries)</li>
 * <li>neodymium.selenideAddons.staleElement.retry.timeout (default 500ms pause between retries)</li>
 * </ul>
 * <p>
 * <b>Example:</b>
 * </p>
 * 
 * <pre>
 * SelenideAddons.$safe(() -&gt; {
 *     $("selectorOne").find("selectorTwo").shouldBe(visible);
 * });
 * </pre>
 * 
 * @param code
 *            the code to run
 */
public static void $safe(final Runnable code)
{
    final int maxRetryCount = Neodymium.configuration().staleElementRetryCount();
    int retryCounter = 0;

    while (retryCounter <= maxRetryCount)
    {
        try
        {
            code.run();
            break;
        }
        catch (final Throwable t)
        {
            if (isThrowableCausedBy(t, StaleElementReferenceException.class))
            {
                retryCounter++;
                if (retryCounter > maxRetryCount)
                {
                    // fail
                    throw t;
                }
                else
                {
                    AllureAddons.addToReport("StaleElementReferenceException catched times: \"" + retryCounter + "\".", retryCounter);
                    Selenide.sleep(Neodymium.configuration().staleElementRetryTimeout());
                }
            }
            else
            {
                // not the kind of error we are looking for
                throw t;
            }
        }
    }
}
 

public static void highlightAllElements(By by, WebDriver driver)
{
    if (Neodymium.configuration().debuggingHighlightSelectedElements())
    {
        List<WebElement> foundElements = driver.findElements(by);
        highlightElements(foundElements, driver);
        if (Neodymium.configuration().debuggingHighlightDuration() > 0)
        {
            Selenide.sleep(Neodymium.configuration().debuggingHighlightDuration());
        }
        resetAllHighlight();
    }
}
 

@Test
public void testSubmit() {
    InputText inputText = fields.field("Имя").control(InputText.class);
    inputText.shouldExists();
    inputText.shouldHaveValue("Joe");

    Select select = fields.field("Пол").control(Select.class);
    select.shouldHaveValue("Мужской");

    DateInterval dateInterval = fields.field("Даты отпуска").control(DateInterval.class);
    dateInterval.beginShouldHaveValue("15.01.2020");
    dateInterval.endShouldHaveValue("30.01.2020");

    // изменяем обычное текстовое поле
    inputText.val("Ann");
    // обновляем страницу и проверяем значения всех полей
    // ожидание отправки поля
    Selenide.sleep(500);
    Selenide.refresh();
    inputText.shouldHaveValue("Ann");
    select.shouldHaveValue("Мужской");
    dateInterval.beginShouldHaveValue("15.01.2020");
    dateInterval.endShouldHaveValue("30.01.2020");

    // изменяем списковое поле
    select.select(1);
    Selenide.sleep(500);
    Selenide.refresh();
    inputText.shouldHaveValue("Ann");
    select.shouldHaveValue("Женский");
    dateInterval.beginShouldHaveValue("15.01.2020");
    dateInterval.endShouldHaveValue("30.01.2020");

    // изменяем интервальное поле
    dateInterval.beginVal("18.01.2020");
    Selenide.sleep(500);
    Selenide.refresh();
    inputText.shouldHaveValue("Ann");
    select.shouldHaveValue("Женский");
    dateInterval.beginShouldHaveValue("18.01.2020");
    dateInterval.endShouldHaveValue("30.01.2020");

    dateInterval.endVal("24.01.2020");
    Selenide.sleep(500);
    Selenide.refresh();
    inputText.shouldHaveValue("Ann");
    select.shouldHaveValue("Женский");
    dateInterval.beginShouldHaveValue("18.01.2020");
    dateInterval.endShouldHaveValue("24.01.2020");
}
 

@Test
public void testSubmit() {
    builder.sources(new CompileInfo("net/n2oapp/framework/autotest/widget/form/submit/index.page.xml"),
            new CompileInfo("net/n2oapp/framework/autotest/widget/form/submit/test.query.xml"),
            new CompileInfo("net/n2oapp/framework/autotest/widget/form/submit/test.object.xml"));

    SimplePage page = open(SimplePage.class);
    page.shouldExists();
    Fields fields = page.single().widget(FormWidget.class).fields();
    fields.shouldHaveSize(3);

    InputText inputText = fields.field("Имя").control(InputText.class);
    inputText.shouldExists();
    inputText.shouldHaveValue("Joe");

    Select select = fields.field("Пол").control(Select.class);
    select.shouldHaveValue("Мужской");

    DateInterval dateInterval = fields.field("Даты отпуска").control(DateInterval.class);
    dateInterval.beginShouldHaveValue("15.01.2020");
    dateInterval.endShouldHaveValue("30.01.2020");

    // изменяем обычное текстовое поле
    inputText.val("Ann");
    // обновляем страницу и проверяем значения всех полей
    // ожидание отправки поля
    Selenide.sleep(500);
    Selenide.refresh();
    inputText.shouldHaveValue("Ann");
    select.shouldHaveValue("Мужской");
    dateInterval.beginShouldHaveValue("15.01.2020");
    dateInterval.endShouldHaveValue("30.01.2020");

    // изменяем списковое поле
    select.select(1);
    Selenide.sleep(500);
    Selenide.refresh();
    inputText.shouldHaveValue("Ann");
    select.shouldHaveValue("Женский");
    dateInterval.beginShouldHaveValue("15.01.2020");
    dateInterval.endShouldHaveValue("30.01.2020");

    // изменяем интервальное поле
    dateInterval.beginVal("18.01.2020");
    Selenide.sleep(500);
    Selenide.refresh();
    inputText.shouldHaveValue("Ann");
    select.shouldHaveValue("Женский");
    dateInterval.beginShouldHaveValue("18.01.2020");
    dateInterval.endShouldHaveValue("30.01.2020");

    dateInterval.endVal("24.01.2020");
    Selenide.sleep(500);
    Selenide.refresh();
    inputText.shouldHaveValue("Ann");
    select.shouldHaveValue("Женский");
    dateInterval.beginShouldHaveValue("18.01.2020");
    dateInterval.endShouldHaveValue("24.01.2020");
}
 

@Test
public void testModalSubmit() {
    builder.sources(new CompileInfo("net/n2oapp/framework/autotest/widget/form/submit_modal/index.page.xml"),
            new CompileInfo("net/n2oapp/framework/autotest/widget/form/submit_modal/modal.page.xml"),
            new CompileInfo("net/n2oapp/framework/autotest/widget/form/submit_modal/test.query.xml"),
            new CompileInfo("net/n2oapp/framework/autotest/widget/form/submit_modal/test.object.xml"));

    SimplePage page = open(SimplePage.class);
    page.shouldExists();
    TableWidget table = page.single().widget(TableWidget.class);
    table.shouldExists();
    table.columns().rows().shouldHaveSize(3);

    Cells row = table.columns().rows().row(1);
    row.cell(1).textShouldHave("test2");
    row.cell(2).textShouldHave("20");

    // открываем модальную страницу для второй записи
    row.click();
    StandardButton btn = table.toolbar().topLeft().button("Открыть");
    btn.click();
    Modal modal = N2oSelenide.modal();

    FormWidget modalForm = modal.content(SimplePage.class).single().widget(FormWidget.class);
    InputText name = modalForm.fields().field("Имя").control(InputText.class);
    InputText age = modalForm.fields().field("Возраст").control(InputText.class);
    name.shouldHaveValue("test2");
    age.shouldHaveValue("20");

    // меняем имя и ждем отправки значения
    name.val("test123");
    Selenide.sleep(500);
    modalForm.toolbar().bottomRight().button("Закрыть").click();

    row.cell(1).textShouldHave("test123");
    row.cell(2).textShouldHave("20");

    // открываем модальную страницу для второй записи
    row.click();
    btn.click();

    // меняем возраст и ждем отправки значения
    age.val("99");
    Selenide.sleep(500);
    modalForm.toolbar().bottomRight().button("Закрыть").click();

    row.cell(1).textShouldHave("test123");
    row.cell(2).textShouldHave("99");
}
 

public static void sleep(int seconds) {
    Selenide.sleep(TimeUnit.MILLISECONDS.convert(seconds, TimeUnit.SECONDS));
}