Java Code Examples for com.google.android.gms.vision.barcode.BarcodeDetector#isOperational()

protected void createCameraSource() throws MobileVisionException {
    Context context = getApplicationContext();

    BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context)
            .setBarcodeFormats(getIntent().getIntExtra(FORMATS, Barcode.ALL_FORMATS))
            .build();

    BarcodeTrackerFactory barcodeTrackerFactory = new BarcodeTrackerFactory(graphicOverlay,
            this, showText);

    barcodeDetector.setProcessor(
            new MultiProcessor.Builder<>(barcodeTrackerFactory).build());

    if (!barcodeDetector.isOperational()) {
        IntentFilter lowStorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = registerReceiver(null, lowStorageFilter) != null;

        if (hasLowStorage) {
            throw new MobileVisionException("Low Storage.");
        }
    }

    cameraSource = new CameraSource
            .Builder(getApplicationContext(), barcodeDetector)
            .setFacing(camera)
            .setRequestedPreviewSize(previewWidth, previewHeight)
            .setFocusMode(autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE : null)
            .setFlashMode(useFlash ? Camera.Parameters.FLASH_MODE_TORCH : null)
            .setRequestedFps(fps)
            .build();
}
 

/**
 * Creates and starts the camera.  Note that this uses a higher resolution in comparison
 * to other detection examples to enable the barcode detector to detect small barcodes
 * at long distances.
 * <p>
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(boolean autoFocus, boolean useFlash) {
    Context context = getApplicationContext();

    // A barcode detector is created to track barcodes.  An associated multi-processor instance
    // is set to receive the barcode detection results, track the barcodes, and maintain
    // graphics for each barcode on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each barcode.
    BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context).build();
    BarcodeTrackerFactory barcodeFactory = new BarcodeTrackerFactory(mGraphicOverlay, this);
    barcodeDetector.setProcessor(
            new MultiProcessor.Builder<>(barcodeFactory).build());

    if (!barcodeDetector.isOperational()) {
        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(this, R.string.low_storage_error, Toast.LENGTH_LONG).show();
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the barcode detector to detect small barcodes
    // at long distances.
    CameraSource.Builder builder = new CameraSource.Builder(getApplicationContext(), barcodeDetector)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedPreviewSize(1600, 1024)
            .setRequestedFps(15.0f);

    // make sure that auto focus is an available option
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.ICE_CREAM_SANDWICH) {
        builder = builder.setFocusMode(
                autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE : null);
    }

    mCameraSource = builder
            .setFlashMode(useFlash ? Camera.Parameters.FLASH_MODE_TORCH : null)
            .build();
}
 

/**
 * Creates and starts the camera.  Note that this uses a higher resolution in comparison
 * to other detection examples to enable the barcode detector to detect small barcodes
 * at long distances.
 * <p/>
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(boolean autoFocus, boolean useFlash) {
    Context context = getContext().getApplicationContext();

    // A barcode detector is created to track barcodes.  An associated multi-processor instance
    // is set to receive the barcode detection results, track the barcodes, and maintain
    // graphics for each barcode on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each barcode.
    BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context).build();
    BarcodeTrackerFactory barcodeFactory = new BarcodeTrackerFactory(mGraphicOverlay, this);
    barcodeDetector.setProcessor(
            new MultiProcessor.Builder<>(barcodeFactory).build());

    if (!barcodeDetector.isOperational()) {
        // Note: The first time that an app using the barcode or face API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any barcodes
        // and/or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = context.registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(context, R.string.mqttcodereader_lowstorageerror, Toast.LENGTH_LONG).show();
            Log.w(TAG, getString(R.string.mqttcodereader_lowstorageerror));
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the barcode detector to detect small barcodes
    // at long distances.
    CameraSource.Builder builder = new CameraSource.Builder(context, barcodeDetector)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedPreviewSize(1600, 1024)
            .setRequestedFps(15.0f);

    builder = builder.setFocusMode(
            autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE : null);

    mCameraSource = builder
            .setFlashMode(useFlash ? Camera.Parameters.FLASH_MODE_TORCH : null)
            .build();
}
 

/**
 * Creates and starts the camera.
 *
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(boolean autoFocus, boolean useFlash) {
    Context context = getApplicationContext();

    // A barcode detector is created to track barcodes.  An associated multi-processor instance
    // is set to receive the barcode detection results, track the barcodes, and maintain
    // graphics for each barcode on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each barcode.
    BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context)
            .setBarcodeFormats(Barcode.ALL_FORMATS)
            .build();
    BarcodeTrackerFactory barcodeFactory = new BarcodeTrackerFactory(this);
    barcodeDetector.setProcessor(new MultiProcessor.Builder<>(barcodeFactory).build());

    if (!barcodeDetector.isOperational()) {
        // Note: The first time that an app using the barcode or face API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any barcodes
        // and/or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(this, R.string.low_storage_error,
                    Toast.LENGTH_LONG).show();
            Log.w(TAG, getString(R.string.low_storage_error));
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the barcode detector to detect small barcodes
    // at long distances.
    DisplayMetrics metrics = new DisplayMetrics();
    getWindowManager().getDefaultDisplay().getMetrics(metrics);

    CameraSource.Builder builder = new CameraSource.Builder(getApplicationContext(), barcodeDetector)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedPreviewSize(metrics.widthPixels, metrics.heightPixels)
            .setRequestedFps(24.0f);

    // make sure that auto focus is an available option
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.ICE_CREAM_SANDWICH) {
        builder = builder.setFocusMode(
                autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE : null);
    }

    mCameraSource = builder
            .setFlashMode(useFlash ? Camera.Parameters.FLASH_MODE_TORCH : null)
            .build();
}
 

/**
 * Creates and starts the camera.  Note that this uses a higher resolution in comparison
 * to other detection examples to enable the barcode detector to detect small barcodes
 * at long distances.
 * <p>
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(final boolean autoFocus, final boolean useFlash) {
    Log.e(TAG, "createCameraSource:");
    Context context = getActivity();

    // A barcode detector is created to track barcodes.  An associated multi-processor instance
    // is set to receive the barcode detection results, track the barcodes, and maintain
    // graphics for each barcode on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each barcode.
    final BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context).build();
    BarcodeTrackerFactory barcodeFactory = new BarcodeTrackerFactory(mGraphicOverlay, this);
    barcodeDetector.setProcessor(
            new MultiProcessor.Builder<>(barcodeFactory).build());

    if (!barcodeDetector.isOperational()) {
        // Note: The first time that an app using the barcode or face API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any barcodes
        // and/or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = getActivity().registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(getActivity(), R.string.low_storage_error, Toast.LENGTH_LONG).show();
            Log.w(TAG, getString(R.string.low_storage_error));
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the barcode detector to detect small barcodes
    // at long distances.

    CameraSource.Builder builder = new CameraSource.Builder(getActivity(), barcodeDetector)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedPreviewSize(1600, 1024)
            .setRequestedFps(1.0f);

    // make sure that auto focus is an available option
    builder = builder.setFocusMode(
            autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE : null);

    mCameraSource = builder
            .setFlashMode(useFlash ? Camera.Parameters.FLASH_MODE_TORCH : null)
            .build();
}
 

/**
 * Creates and starts the camera.
 *
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(boolean autoFocus, boolean useFlash) {
    Context context = getApplicationContext();

    // A barcode_capture detector is created to track barcodes.  An associated multi-processor instance
    // is set to receive the barcode_capture detection results, track the barcodes, and maintain
    // graphics for each barcode_capture on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each barcode_capture.
    BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context)
            .setBarcodeFormats(Barcode.ALL_FORMATS)
            .build();
    BarcodeTrackerFactory barcodeFactory = new BarcodeTrackerFactory(this);
    barcodeDetector.setProcessor(new MultiProcessor.Builder<>(barcodeFactory).build());

    if (!barcodeDetector.isOperational()) {
        // Note: The first time that an app using the barcode_capture or face API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any barcodes
        // and/or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(this, R.string.low_storage_error,
                    Toast.LENGTH_LONG).show();
            Log.w(TAG, getString(R.string.low_storage_error));
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the barcode_capture detector to detect small barcodes
    // at long distances.
    DisplayMetrics metrics = new DisplayMetrics();
    getWindowManager().getDefaultDisplay().getMetrics(metrics);

    CameraSource.Builder builder = new CameraSource.Builder(getApplicationContext(), barcodeDetector)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedPreviewSize(metrics.widthPixels, metrics.heightPixels)
            .setRequestedFps(24.0f);

    // make sure that auto focus is an available option
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.ICE_CREAM_SANDWICH) {
        builder = builder.setFocusMode(
                autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE : null);
    }

    mCameraSource = builder
            .setFlashMode(useFlash ? Camera.Parameters.FLASH_MODE_TORCH : null)
            .build();
}
 

/**
 * Creates and starts the camera.  Note that this uses a higher resolution in comparison
 * to other detection examples to enable the barcode detector to detect small barcodes
 * at long distances.
 *
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(boolean autoFocus, boolean useFlash) {
    Context context = getApplicationContext();

    // A barcode detector is created to track barcodes.  An associated multi-processor instance
    // is set to receive the barcode detection results, track the barcodes, and maintain
    // graphics for each barcode on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each barcode.
    BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context).build();
    BarcodeTrackerFactory barcodeFactory = new BarcodeTrackerFactory(mGraphicOverlay, this);
    barcodeDetector.setProcessor(
            new MultiProcessor.Builder<>(barcodeFactory).build());

    if (!barcodeDetector.isOperational()) {
        // Note: The first time that an app using the barcode or face API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any barcodes
        // and/or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(this, R.string.low_storage_error, Toast.LENGTH_LONG).show();
            Log.w(TAG, getString(R.string.low_storage_error));
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the barcode detector to detect small barcodes
    // at long distances.
    CameraSource.Builder builder = new CameraSource.Builder(getApplicationContext(), barcodeDetector)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedPreviewSize(1600, 1024)
            .setRequestedFps(15.0f);

    // make sure that auto focus is an available option
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.ICE_CREAM_SANDWICH) {
        builder = builder.setFocusMode(
                autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE : null);
    }

    mCameraSource = builder
            .setFlashMode(useFlash ? Camera.Parameters.FLASH_MODE_TORCH : null)
            .build();
}
 

/**
 * Creates and starts the camera.  Note that this uses a higher resolution in comparison
 * to other detection examples to enable the barcode detector to detect small barcodes
 * at long distances.
 *
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(boolean autoFocus, boolean useFlash) {
    Context context = getApplicationContext();

    // A barcode detector is created to track barcodes.  An associated multi-processor instance
    // is set to receive the barcode detection results, track the barcodes, and maintain
    // graphics for each barcode on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each barcode.
    BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context).build();
    CodeTrackerFactory barcodeFactory = new CodeTrackerFactory(mGraphicOverlay, this);
    barcodeDetector.setProcessor(
            new MultiProcessor.Builder<>(barcodeFactory).build());

    if (!barcodeDetector.isOperational()) {
        // Note: The first time that an app using the barcode or face API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any barcodes
        // and/or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(this, R.string.low_storage_error, Toast.LENGTH_LONG).show();
            Log.w(TAG, getString(R.string.low_storage_error));
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the barcode detector to detect small barcodes
    // at long distances.
    CameraSource.Builder builder = new CameraSource.Builder(getApplicationContext(), barcodeDetector)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedPreviewSize(1600, 1024)
            .setRequestedFps(15.0f);

    // make sure that auto focus is an available option
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.ICE_CREAM_SANDWICH) {
        builder = builder.setFocusMode(
                autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE : null);
    }

    mCameraSource = builder
            .setFlashMode(useFlash ? Camera.Parameters.FLASH_MODE_TORCH : null)
            .build();
}
 

/**
 * Creates and starts the camera.  Note that this uses a higher resolution in comparison
 * to other detection examples to enable the barcode detector to detect small barcodes
 * at long distances.
 * <p>
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(boolean autoFocus, boolean useFlash) {
    Log.e(TAG, "createCameraSource:");
    Context context = getActivity();

    // A barcode detector is created to track barcodes.  An associated multi-processor instance
    // is set to receive the barcode detection results, track the barcodes, and maintain
    // graphics for each barcode on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each barcode.
    BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context).build();
    BarcodeTrackerFactory barcodeFactory = new BarcodeTrackerFactory(mGraphicOverlay, this);
    barcodeDetector.setProcessor(
            new MultiProcessor.Builder<>(barcodeFactory).build());

    if (!barcodeDetector.isOperational()) {
        // Note: The first time that an app using the barcode or face API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any barcodes
        // and/or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = getActivity().registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(getActivity(), R.string.low_storage_error, Toast.LENGTH_LONG).show();
            Log.w(TAG, getString(R.string.low_storage_error));
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the barcode detector to detect small barcodes
    // at long distances.
    CameraSource.Builder builder = new CameraSource.Builder(getActivity(), barcodeDetector)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedPreviewSize(1600, 1024)
            .setRequestedFps(15.0f);

    // make sure that auto focus is an available option
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.ICE_CREAM_SANDWICH) {
        builder = builder.setFocusMode(
                autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE : null);
    }

    mCameraSource = builder
            .setFlashMode(useFlash ? Camera.Parameters.FLASH_MODE_TORCH : null)
            .build();
}
 

private void createCameraSource() {

        Context context = getActivity().getApplicationContext();

        int code = GoogleApiAvailability.getInstance().isGooglePlayServicesAvailable(
                getActivity());
        if (code != ConnectionResult.SUCCESS) {
            GoogleApiAvailability.getInstance().getErrorDialog(getActivity(), code, 100).show();
        } else {

            // A barcode detector is created to track barcodes.  An associated multi-processor instance
            // is set to receive the barcode detection results, track the barcodes, and maintain
            // graphics for each barcode on screen.  The factory is used by the multi-processor to
            // create a separate tracker instance for each barcode.
            BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context).build();
            processor = new PandroidScannerView.SimpleProcessor() {

                @Override
                public boolean handleBarcode(Barcode barcode) {
                    toastManager.makeToast(getActivity(), "Detected: " + barcode.displayValue, new ToastManager.ToastListener() {
                        @Override
                        public void onDismiss() {
                            processor.resumeDetector();
                        }

                        @Override
                        public void onActionClicked() {

                        }
                    });
                    return true;
                }
            };
            barcodeDetector.setProcessor(processor);

            if (!barcodeDetector.isOperational()) {
                // Note: The first time that an app using the barcode or face API is installed on a
                // device, GMS will download a native libraries to the device in order to do detection.
                // Usually this completes before the app is run for the first time.  But if that
                // download has not yet completed, then the above call will not detect any barcodes
                // and/or faces.
                //
                // isOperational() can be used to check if the required native libraries are currently
                // available.  The detectors will automatically become operational once the library
                // downloads complete on device.
                Log.w(TAG, "Detector dependencies are not yet available.");
            }

            // Creates and starts the camera.  Note that this uses a higher resolution in comparison
            // to other detection examples to enable the barcode detector to detect small barcodes
            // at long distances.
            CameraSource.Builder builder = new CameraSource.Builder(context, barcodeDetector)
                    .setFacing(CameraSource.CAMERA_FACING_BACK)
                    .setRequestedPreviewSize(1600, 1024)
                    .setRequestedFps(30.0f)
                    .setAutoFocusEnabled(true);

            mCameraSource = builder.build();
        }

    }
 

/**
 * Creates and starts the camera.
 *
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(boolean autoFocus, boolean useFlash) {
    Context context = getApplicationContext();

    // A barcode detector is created to track barcodes.  An associated multi-processor instance
    // is set to receive the barcode detection results, track the barcodes, and maintain
    // graphics for each barcode on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each barcode.
    BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context)
            .setBarcodeFormats(Barcode.ALL_FORMATS)
            .build();
    BarcodeTrackerFactory barcodeFactory = new BarcodeTrackerFactory(this);
    barcodeDetector.setProcessor(new MultiProcessor.Builder<>(barcodeFactory).build());

    if (!barcodeDetector.isOperational()) {
        // Note: The first time that an app using the barcode or face API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any barcodes
        // and/or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(this, R.string.low_storage_error,
                    Toast.LENGTH_LONG).show();
            Log.w(TAG, getString(R.string.low_storage_error));
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the barcode detector to detect small barcodes
    // at long distances.
    DisplayMetrics metrics = new DisplayMetrics();
    getWindowManager().getDefaultDisplay().getMetrics(metrics);

    CameraSource.Builder builder = new CameraSource.Builder(getApplicationContext(), barcodeDetector)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedPreviewSize(metrics.widthPixels, metrics.heightPixels)
            .setRequestedFps(24.0f);

    // make sure that auto focus is an available option
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.ICE_CREAM_SANDWICH) {
        builder = builder.setFocusMode(
                autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE : null);
    }

    mCameraSource = builder
            .setFlashMode(useFlash ? Camera.Parameters.FLASH_MODE_TORCH : null)
            .build();
}
 

/**
 * Creates and starts the camera.  Note that this uses a higher resolution in comparison
 * to other detection examples to enable the barcode detector to detect small barcodes
 * at long distances.
 *
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(boolean autoFocus) {
    Context context = getApplicationContext();

    // A barcode detector is created to track barcodes.  An associated multi-processor instance
    // is set to receive the barcode detection results, track the barcodes, and maintain
    // graphics for each barcode on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each barcode.
    BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context).build();
    BarcodeTrackerFactory barcodeFactory = new BarcodeTrackerFactory(mGraphicOverlay,this);
    barcodeDetector.setProcessor(
            new MultiProcessor.Builder<Barcode>(barcodeFactory).build());

    if (!barcodeDetector.isOperational()) {
        // Note: The first time that an app using the barcode or face API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any barcodes
        // and/or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(this, "Face detector dependencies cannot be downloaded due to low device storage", Toast.LENGTH_LONG).show();
            Log.w(TAG, "Face detector dependencies cannot be downloaded due to low device storage");
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the barcode detector to detect small barcodes
    // at long distances.
    CameraSource.Builder builder = new CameraSource.Builder(getApplicationContext(), barcodeDetector)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedPreviewSize(1600, 960)
            .setRequestedFps(15.0f);

    // make sure that auto focus is an available option
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.ICE_CREAM_SANDWICH) {
        builder = builder.setFocusMode(
                autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_VIDEO : null);
    }

    mCameraSource = builder.build();

}
 

/**
 * Creates and starts the camera.  Note that this uses a higher resolution in comparison
 * to other detection examples to enable the barcode detector to detect small barcodes
 * at long distances.
 * <p/>
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource() {
    Context context = getActivity().getApplicationContext();

    // A barcode detector is created to track barcodes.  An associated multi-processor instance
    // is set to receive the barcode detection results, track the barcodes, and maintain
    // graphics for each barcode on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each barcode.
    BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context)
            .setBarcodeFormats(mFormats)
            .build();

    BarcodeTrackerFactory barcodeFactory = new BarcodeTrackerFactory(mGraphicOverlay, new BarcodeGraphicTracker.BarcodeDetectionListener() {
        @Override
        public void onNewBarcodeDetected(int id, Barcode barcode) {
            if (barcode != null) onBarcodeDetected(barcode);
            else if (mGraphicOverlay.getFirstGraphic() != null && mGraphicOverlay.getFirstGraphic().getBarcode() != null) {
                onBarcodeDetected(mGraphicOverlay.getFirstGraphic().getBarcode());
            }
        }
    });

    barcodeDetector.setProcessor(
            new MultiProcessor.Builder<>(barcodeFactory).build());

    if (!barcodeDetector.isOperational()) {
        // Note: The first time that an app using the barcode or face API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any barcodes
        // and/or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w("BARCODE-SCANNER", "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = getActivity().registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            if (mListener == null)
                Toast.makeText(getActivity(), R.string.low_storage_error, Toast.LENGTH_LONG).show();
            else
                mListener.onBarcodeScanningFailed("Barcode detector dependencies cannot be downloaded due to low storage");
            Log.w("BARCODE-SCANNER", getString(R.string.low_storage_error));
        }
    }

    //boolean isPortrait = mPreview.isPortraitMode();

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the barcode detector to detect small barcodes
    // at long distances.
    CameraSource.Builder builder = new CameraSource.Builder(getActivity().getApplicationContext(), barcodeDetector)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedFps(15.0f);

    // make sure that auto focus is an available option
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.ICE_CREAM_SANDWICH) {
        builder = builder.setFocusMode(Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE);
    }

    mCameraSource = builder.build();
    Log.d("SCANNER-FRAGMENT", "created camera source");
}
 

/**
 * Creates and starts the camera.  Note that this uses a higher resolution in comparison
 * to other detection examples to enable the barcode detector to detect small barcodes
 * at long distances.
 *
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(boolean autoFocus, boolean useFlash) {
    Context context = getApplicationContext();

    // A barcode detector is created to track barcodes.  An associated multi-processor instance
    // is set to receive the barcode detection results, track the barcodes, and maintain
    // graphics for each barcode on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each barcode.
    BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context).build();
    BarcodeTrackerFactory barcodeFactory = new BarcodeTrackerFactory(mGraphicOverlay, this);
    barcodeDetector.setProcessor(
            new MultiProcessor.Builder<>(barcodeFactory).build());

    if (!barcodeDetector.isOperational()) {
        // Note: The first time that an app using the barcode or face API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any barcodes
        // and/or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(this, R.string.low_storage_error, Toast.LENGTH_LONG).show();
            Log.w(TAG, getString(R.string.low_storage_error));
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the barcode detector to detect small barcodes
    // at long distances.
    CameraSource.Builder builder = new CameraSource.Builder(getApplicationContext(), barcodeDetector)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedPreviewSize(1600, 1024)
            .setRequestedFps(15.0f);

    // make sure that auto focus is an available option
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.ICE_CREAM_SANDWICH) {
        builder = builder.setFocusMode(
                autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE : null);
    }

    mCameraSource = builder
            .setFlashMode(useFlash ? Camera.Parameters.FLASH_MODE_TORCH : null)
            .build();
}
 

/**
 * Creates and starts the camera.  Note that this uses a higher resolution in comparison
 * to other detection examples to enable the barcode detector to detect small barcodes
 * at long distances.
 *
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource() { //boolean autoFocus, boolean useFlash) {
    Context context = getApplicationContext();

    BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context).build();
    BarcodeTrackerFactory barcodeFactory = new BarcodeTrackerFactory(new BarcodeGraphicTracker.Callback() {
        @Override
        public void onFound(Barcode barcode) {
            if (barcode != null) {
                Intent data = new Intent();
                data.putExtra(BarcodeObject, barcode);
                setResult(CommonStatusCodes.SUCCESS, data);
                finish();
            }
        }
    });
    barcodeDetector.setProcessor(
            new MultiProcessor.Builder<>(barcodeFactory).build());

    if (!barcodeDetector.isOperational()) {
        // Note: The first time that an app using the barcode or face API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any barcodes
        // and/or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(this, R.string.low_storage_error, Toast.LENGTH_LONG).show();
            Log.w(TAG, getString(R.string.low_storage_error));
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the barcode detector to detect small barcodes
    // at long distances.
    DisplayMetrics displayMetrics = getResources().getDisplayMetrics();

    CameraSource.Builder builder = new CameraSource.Builder(getApplicationContext(), barcodeDetector)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedPreviewSize(displayMetrics.widthPixels, displayMetrics.heightPixels)
            .setRequestedFps(15.0f);

    // make sure that auto focus is an available option
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.ICE_CREAM_SANDWICH) {
        builder = builder.setFocusMode(Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE);
    }

    mCameraSource = builder
            .setFlashMode(null).build();

    Snackbar.make(mGraphicOverlay, R.string.barcode_scan_instructions, Snackbar.LENGTH_INDEFINITE)
            .setAction(R.string.ok, new View.OnClickListener(){
                public void onClick(View v) {} }).show();
}
 

/**
 * Creates and starts the camera.  Note that this uses a higher resolution in comparison
 * to other detection examples to enable the barcode detector to detect small barcodes
 * at long distances.
 * <p/>
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(boolean autoFocus, boolean useFlash) {
    Context context = getApplicationContext();

    // A barcode detector is created to track barcodes.  An associated multi-processor instance
    // is set to receive the barcode detection results, track the barcodes, and maintain
    // graphics for each barcode on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each barcode.
    BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context).build();
    BarcodeTrackerFactory barcodeFactory = new BarcodeTrackerFactory(mGraphicOverlay, this);
    barcodeDetector.setProcessor(
            new MultiProcessor.Builder<>(barcodeFactory).build());

    if (!barcodeDetector.isOperational()) {
        // Note: The first time that an app using the barcode or face API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any barcodes
        // and/or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(this, R.string.mqttcodereader_lowstorageerror, Toast.LENGTH_LONG).show();
            Log.w(TAG, getString(R.string.mqttcodereader_lowstorageerror));
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the barcode detector to detect small barcodes
    // at long distances.
    CameraSource.Builder builder = new CameraSource.Builder(getApplicationContext(), barcodeDetector)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedPreviewSize(1600, 1024)
            .setRequestedFps(15.0f);

    builder = builder.setFocusMode(
            autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE : null);

    mCameraSource = builder
            .setFlashMode(useFlash ? Camera.Parameters.FLASH_MODE_TORCH : null)
            .build();
}