Java Code Examples for org.jfree.ui.RectangleEdge#coordinate()
The following examples show how to use
org.jfree.ui.RectangleEdge#coordinate() .
You can vote up the ones you like or vote down the ones you don't like,
and go to the original project or source file by following the links above each example. You may check out the related API usage on the sidebar.
Example 1
| Source File: CombinedRangeXYPlot.java From SIMVA-SoS with Apache License 2.0 | 4 votes |
|
/**
* Draws the plot within the specified area on a graphics device.
*
* @param g2 the graphics device.
* @param area the plot area (in Java2D space).
* @param anchor an anchor point in Java2D space (<code>null</code>
* permitted).
* @param parentState the state from the parent plot, if there is one
* (<code>null</code> permitted).
* @param info collects chart drawing information (<code>null</code>
* permitted).
*/
@Override
public void draw(Graphics2D g2, Rectangle2D area, Point2D anchor,
PlotState parentState, PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
insets.trim(area);
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
//this.axisOffset.trim(dataArea);
// set the width and height of non-shared axis of all sub-plots
setFixedDomainAxisSpaceForSubplots(space);
// draw the shared axis
ValueAxis axis = getRangeAxis();
RectangleEdge edge = getRangeAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, edge);
AxisState axisState = axis.draw(g2, cursor, area, dataArea, edge, info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, axisState);
// draw all the charts
for (int i = 0; i < this.subplots.size(); i++) {
XYPlot plot = (XYPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
plot.draw(g2, this.subplotAreas[i], anchor, parentState,
subplotInfo);
}
if (info != null) {
info.setDataArea(dataArea);
}
}
Example 2
| Source File: CombinedDomainCategoryPlot.java From opensim-gui with Apache License 2.0 | 4 votes |
|
/**
* Draws the plot on a Java 2D graphics device (such as the screen or a
* printer). Will perform all the placement calculations for each of the
* sub-plots and then tell these to draw themselves.
*
* @param g2 the graphics device.
* @param area the area within which the plot (including axis labels)
* should be drawn.
* @param anchor the anchor point (<code>null</code> permitted).
* @param parentState the state from the parent plot, if there is one.
* @param info collects information about the drawing (<code>null</code>
* permitted).
*/
public void draw(Graphics2D g2,
Rectangle2D area,
Point2D anchor,
PlotState parentState,
PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
area.setRect(area.getX() + insets.getLeft(),
area.getY() + insets.getTop(),
area.getWidth() - insets.getLeft() - insets.getRight(),
area.getHeight() - insets.getTop() - insets.getBottom());
// calculate the data area...
setFixedRangeAxisSpaceForSubplots(null);
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
// set the width and height of non-shared axis of all sub-plots
setFixedRangeAxisSpaceForSubplots(space);
// draw the shared axis
CategoryAxis axis = getDomainAxis();
RectangleEdge domainEdge = getDomainAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, domainEdge);
AxisState axisState = axis.draw(g2, cursor, area, dataArea,
domainEdge, info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, axisState);
// draw all the subplots
for (int i = 0; i < this.subplots.size(); i++) {
CategoryPlot plot = (CategoryPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
plot.draw(g2, this.subplotAreas[i], null, parentState, subplotInfo);
}
if (info != null) {
info.setDataArea(dataArea);
}
}
Example 3
| Source File: CombinedRangeXYPlot.java From opensim-gui with Apache License 2.0 | 4 votes |
|
/**
* Draws the plot within the specified area on a graphics device.
*
* @param g2 the graphics device.
* @param area the plot area (in Java2D space).
* @param anchor an anchor point in Java2D space (<code>null</code>
* permitted).
* @param parentState the state from the parent plot, if there is one
* (<code>null</code> permitted).
* @param info collects chart drawing information (<code>null</code>
* permitted).
*/
public void draw(Graphics2D g2,
Rectangle2D area,
Point2D anchor,
PlotState parentState,
PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
insets.trim(area);
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
//this.axisOffset.trim(dataArea);
// set the width and height of non-shared axis of all sub-plots
setFixedDomainAxisSpaceForSubplots(space);
// draw all the charts
for (int i = 0; i < this.subplots.size(); i++) {
XYPlot plot = (XYPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
plot.draw(g2, this.subplotAreas[i], anchor, parentState,
subplotInfo);
}
// draw the shared axis
ValueAxis axis = getRangeAxis();
RectangleEdge edge = getRangeAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, edge);
AxisState axisState = axis.draw(g2, cursor, area, dataArea, edge, info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, axisState);
if (info != null) {
info.setDataArea(dataArea);
}
}
Example 4
| Source File: CombinedRangeCategoryPlot.java From opensim-gui with Apache License 2.0 | 4 votes |
|
/**
* Draws the plot on a Java 2D graphics device (such as the screen or a
* printer). Will perform all the placement calculations for each
* sub-plots and then tell these to draw themselves.
*
* @param g2 the graphics device.
* @param area the area within which the plot (including axis labels)
* should be drawn.
* @param anchor the anchor point (<code>null</code> permitted).
* @param parentState the parent state.
* @param info collects information about the drawing (<code>null</code>
* permitted).
*/
public void draw(Graphics2D g2, Rectangle2D area, Point2D anchor,
PlotState parentState,
PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
insets.trim(area);
// calculate the data area...
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
// set the width and height of non-shared axis of all sub-plots
setFixedDomainAxisSpaceForSubplots(space);
// draw the shared axis
ValueAxis axis = getRangeAxis();
RectangleEdge rangeEdge = getRangeAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, rangeEdge);
AxisState state = axis.draw(g2, cursor, area, dataArea, rangeEdge,
info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, state);
// draw all the charts
for (int i = 0; i < this.subplots.size(); i++) {
CategoryPlot plot = (CategoryPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
plot.draw(g2, this.subplotArea[i], null, parentState, subplotInfo);
}
if (info != null) {
info.setDataArea(dataArea);
}
}
Example 5
| Source File: CombinedDomainXYPlot.java From opensim-gui with Apache License 2.0 | 4 votes |
|
/**
* Draws the plot within the specified area on a graphics device.
*
* @param g2 the graphics device.
* @param area the plot area (in Java2D space).
* @param anchor an anchor point in Java2D space (<code>null</code>
* permitted).
* @param parentState the state from the parent plot, if there is one
* (<code>null</code> permitted).
* @param info collects chart drawing information (<code>null</code>
* permitted).
*/
public void draw(Graphics2D g2,
Rectangle2D area,
Point2D anchor,
PlotState parentState,
PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
insets.trim(area);
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
// set the width and height of non-shared axis of all sub-plots
setFixedRangeAxisSpaceForSubplots(space);
// draw all the subplots
for (int i = 0; i < this.subplots.size(); i++) {
XYPlot plot = (XYPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
plot.draw(g2, this.subplotAreas[i], anchor, parentState,
subplotInfo);
}
// draw the shared axis
ValueAxis axis = getDomainAxis();
RectangleEdge edge = getDomainAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, edge);
AxisState axisState = axis.draw(g2, cursor, area, dataArea, edge, info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, axisState);
if (info != null) {
info.setDataArea(dataArea);
}
}
Example 6
| Source File: CombinedDomainXYPlot.java From buffer_bci with GNU General Public License v3.0 | 4 votes |
|
/**
* Draws the plot within the specified area on a graphics device.
*
* @param g2 the graphics device.
* @param area the plot area (in Java2D space).
* @param anchor an anchor point in Java2D space (<code>null</code>
* permitted).
* @param parentState the state from the parent plot, if there is one
* (<code>null</code> permitted).
* @param info collects chart drawing information (<code>null</code>
* permitted).
*/
@Override
public void draw(Graphics2D g2, Rectangle2D area, Point2D anchor,
PlotState parentState, PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
insets.trim(area);
setFixedRangeAxisSpaceForSubplots(null);
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
// set the width and height of non-shared axis of all sub-plots
setFixedRangeAxisSpaceForSubplots(space);
// draw the shared axis
ValueAxis axis = getDomainAxis();
RectangleEdge edge = getDomainAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, edge);
AxisState axisState = axis.draw(g2, cursor, area, dataArea, edge, info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, axisState);
// draw all the subplots
for (int i = 0; i < this.subplots.size(); i++) {
XYPlot plot = (XYPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
plot.draw(g2, this.subplotAreas[i], anchor, parentState,
subplotInfo);
}
if (info != null) {
info.setDataArea(dataArea);
}
}
Example 7
| Source File: CombinedRangeXYPlot.java From ECG-Viewer with GNU General Public License v2.0 | 4 votes |
|
/**
* Draws the plot within the specified area on a graphics device.
*
* @param g2 the graphics device.
* @param area the plot area (in Java2D space).
* @param anchor an anchor point in Java2D space (<code>null</code>
* permitted).
* @param parentState the state from the parent plot, if there is one
* (<code>null</code> permitted).
* @param info collects chart drawing information (<code>null</code>
* permitted).
*/
@Override
public void draw(Graphics2D g2, Rectangle2D area, Point2D anchor,
PlotState parentState, PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
insets.trim(area);
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
//this.axisOffset.trim(dataArea);
// set the width and height of non-shared axis of all sub-plots
setFixedDomainAxisSpaceForSubplots(space);
// draw the shared axis
ValueAxis axis = getRangeAxis();
RectangleEdge edge = getRangeAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, edge);
AxisState axisState = axis.draw(g2, cursor, area, dataArea, edge, info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, axisState);
// draw all the charts
for (int i = 0; i < this.subplots.size(); i++) {
XYPlot plot = (XYPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
plot.draw(g2, this.subplotAreas[i], anchor, parentState,
subplotInfo);
}
if (info != null) {
info.setDataArea(dataArea);
}
}
Example 8
| Source File: CombinedRangeCategoryPlot.java From ECG-Viewer with GNU General Public License v2.0 | 4 votes |
|
/**
* Draws the plot on a Java 2D graphics device (such as the screen or a
* printer). Will perform all the placement calculations for each
* sub-plots and then tell these to draw themselves.
*
* @param g2 the graphics device.
* @param area the area within which the plot (including axis labels)
* should be drawn.
* @param anchor the anchor point (<code>null</code> permitted).
* @param parentState the parent state.
* @param info collects information about the drawing (<code>null</code>
* permitted).
*/
@Override
public void draw(Graphics2D g2, Rectangle2D area, Point2D anchor,
PlotState parentState,
PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
insets.trim(area);
// calculate the data area...
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
// set the width and height of non-shared axis of all sub-plots
setFixedDomainAxisSpaceForSubplots(space);
// draw the shared axis
ValueAxis axis = getRangeAxis();
RectangleEdge rangeEdge = getRangeAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, rangeEdge);
AxisState state = axis.draw(g2, cursor, area, dataArea, rangeEdge,
info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, state);
// draw all the charts
for (int i = 0; i < this.subplots.size(); i++) {
CategoryPlot plot = (CategoryPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
Point2D subAnchor = null;
if (anchor != null && this.subplotArea[i].contains(anchor)) {
subAnchor = anchor;
}
plot.draw(g2, this.subplotArea[i], subAnchor, parentState,
subplotInfo);
}
if (info != null) {
info.setDataArea(dataArea);
}
}
Example 9
| Source File: CombinedDomainXYPlot.java From ECG-Viewer with GNU General Public License v2.0 | 4 votes |
|
/**
* Draws the plot within the specified area on a graphics device.
*
* @param g2 the graphics device.
* @param area the plot area (in Java2D space).
* @param anchor an anchor point in Java2D space (<code>null</code>
* permitted).
* @param parentState the state from the parent plot, if there is one
* (<code>null</code> permitted).
* @param info collects chart drawing information (<code>null</code>
* permitted).
*/
@Override
public void draw(Graphics2D g2, Rectangle2D area, Point2D anchor,
PlotState parentState, PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
insets.trim(area);
setFixedRangeAxisSpaceForSubplots(null);
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
// set the width and height of non-shared axis of all sub-plots
setFixedRangeAxisSpaceForSubplots(space);
// draw the shared axis
ValueAxis axis = getDomainAxis();
RectangleEdge edge = getDomainAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, edge);
AxisState axisState = axis.draw(g2, cursor, area, dataArea, edge, info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, axisState);
// draw all the subplots
for (int i = 0; i < this.subplots.size(); i++) {
XYPlot plot = (XYPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
plot.draw(g2, this.subplotAreas[i], anchor, parentState,
subplotInfo);
}
if (info != null) {
info.setDataArea(dataArea);
}
}
Example 10
| Source File: CombinedDomainCategoryPlot.java From SIMVA-SoS with Apache License 2.0 | 4 votes |
|
/**
* Draws the plot on a Java 2D graphics device (such as the screen or a
* printer). Will perform all the placement calculations for each of the
* sub-plots and then tell these to draw themselves.
*
* @param g2 the graphics device.
* @param area the area within which the plot (including axis labels)
* should be drawn.
* @param anchor the anchor point (<code>null</code> permitted).
* @param parentState the state from the parent plot, if there is one.
* @param info collects information about the drawing (<code>null</code>
* permitted).
*/
@Override
public void draw(Graphics2D g2, Rectangle2D area, Point2D anchor,
PlotState parentState, PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
area.setRect(area.getX() + insets.getLeft(),
area.getY() + insets.getTop(),
area.getWidth() - insets.getLeft() - insets.getRight(),
area.getHeight() - insets.getTop() - insets.getBottom());
// calculate the data area...
setFixedRangeAxisSpaceForSubplots(null);
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
// set the width and height of non-shared axis of all sub-plots
setFixedRangeAxisSpaceForSubplots(space);
// draw the shared axis
CategoryAxis axis = getDomainAxis();
RectangleEdge domainEdge = getDomainAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, domainEdge);
AxisState axisState = axis.draw(g2, cursor, area, dataArea,
domainEdge, info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, axisState);
// draw all the subplots
for (int i = 0; i < this.subplots.size(); i++) {
CategoryPlot plot = (CategoryPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
Point2D subAnchor = null;
if (anchor != null && this.subplotAreas[i].contains(anchor)) {
subAnchor = anchor;
}
plot.draw(g2, this.subplotAreas[i], subAnchor, parentState,
subplotInfo);
}
if (info != null) {
info.setDataArea(dataArea);
}
}
Example 11
| Source File: CombinedDomainCategoryPlot.java From buffer_bci with GNU General Public License v3.0 | 4 votes |
|
/**
* Draws the plot on a Java 2D graphics device (such as the screen or a
* printer). Will perform all the placement calculations for each of the
* sub-plots and then tell these to draw themselves.
*
* @param g2 the graphics device.
* @param area the area within which the plot (including axis labels)
* should be drawn.
* @param anchor the anchor point (<code>null</code> permitted).
* @param parentState the state from the parent plot, if there is one.
* @param info collects information about the drawing (<code>null</code>
* permitted).
*/
@Override
public void draw(Graphics2D g2, Rectangle2D area, Point2D anchor,
PlotState parentState, PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
area.setRect(area.getX() + insets.getLeft(),
area.getY() + insets.getTop(),
area.getWidth() - insets.getLeft() - insets.getRight(),
area.getHeight() - insets.getTop() - insets.getBottom());
// calculate the data area...
setFixedRangeAxisSpaceForSubplots(null);
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
// set the width and height of non-shared axis of all sub-plots
setFixedRangeAxisSpaceForSubplots(space);
// draw the shared axis
CategoryAxis axis = getDomainAxis();
RectangleEdge domainEdge = getDomainAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, domainEdge);
AxisState axisState = axis.draw(g2, cursor, area, dataArea,
domainEdge, info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, axisState);
// draw all the subplots
for (int i = 0; i < this.subplots.size(); i++) {
CategoryPlot plot = (CategoryPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
Point2D subAnchor = null;
if (anchor != null && this.subplotAreas[i].contains(anchor)) {
subAnchor = anchor;
}
plot.draw(g2, this.subplotAreas[i], subAnchor, parentState,
subplotInfo);
}
if (info != null) {
info.setDataArea(dataArea);
}
}
Example 12
| Source File: CombinedRangeCategoryPlot.java From SIMVA-SoS with Apache License 2.0 | 4 votes |
|
/**
* Draws the plot on a Java 2D graphics device (such as the screen or a
* printer). Will perform all the placement calculations for each
* sub-plots and then tell these to draw themselves.
*
* @param g2 the graphics device.
* @param area the area within which the plot (including axis labels)
* should be drawn.
* @param anchor the anchor point (<code>null</code> permitted).
* @param parentState the parent state.
* @param info collects information about the drawing (<code>null</code>
* permitted).
*/
@Override
public void draw(Graphics2D g2, Rectangle2D area, Point2D anchor,
PlotState parentState,
PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
insets.trim(area);
// calculate the data area...
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
// set the width and height of non-shared axis of all sub-plots
setFixedDomainAxisSpaceForSubplots(space);
// draw the shared axis
ValueAxis axis = getRangeAxis();
RectangleEdge rangeEdge = getRangeAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, rangeEdge);
AxisState state = axis.draw(g2, cursor, area, dataArea, rangeEdge,
info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, state);
// draw all the charts
for (int i = 0; i < this.subplots.size(); i++) {
CategoryPlot plot = (CategoryPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
Point2D subAnchor = null;
if (anchor != null && this.subplotArea[i].contains(anchor)) {
subAnchor = anchor;
}
plot.draw(g2, this.subplotArea[i], subAnchor, parentState,
subplotInfo);
}
if (info != null) {
info.setDataArea(dataArea);
}
}
Example 13
| Source File: CombinedRangeXYPlot.java From buffer_bci with GNU General Public License v3.0 | 4 votes |
|
/**
* Draws the plot within the specified area on a graphics device.
*
* @param g2 the graphics device.
* @param area the plot area (in Java2D space).
* @param anchor an anchor point in Java2D space (<code>null</code>
* permitted).
* @param parentState the state from the parent plot, if there is one
* (<code>null</code> permitted).
* @param info collects chart drawing information (<code>null</code>
* permitted).
*/
@Override
public void draw(Graphics2D g2, Rectangle2D area, Point2D anchor,
PlotState parentState, PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
insets.trim(area);
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
//this.axisOffset.trim(dataArea);
// set the width and height of non-shared axis of all sub-plots
setFixedDomainAxisSpaceForSubplots(space);
// draw the shared axis
ValueAxis axis = getRangeAxis();
RectangleEdge edge = getRangeAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, edge);
AxisState axisState = axis.draw(g2, cursor, area, dataArea, edge, info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, axisState);
// draw all the charts
for (int i = 0; i < this.subplots.size(); i++) {
XYPlot plot = (XYPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
plot.draw(g2, this.subplotAreas[i], anchor, parentState,
subplotInfo);
}
if (info != null) {
info.setDataArea(dataArea);
}
}
Example 14
| Source File: CombinedDomainCategoryPlot.java From ccu-historian with GNU General Public License v3.0 | 4 votes |
|
/**
* Draws the plot on a Java 2D graphics device (such as the screen or a
* printer). Will perform all the placement calculations for each of the
* sub-plots and then tell these to draw themselves.
*
* @param g2 the graphics device.
* @param area the area within which the plot (including axis labels)
* should be drawn.
* @param anchor the anchor point (<code>null</code> permitted).
* @param parentState the state from the parent plot, if there is one.
* @param info collects information about the drawing (<code>null</code>
* permitted).
*/
@Override
public void draw(Graphics2D g2, Rectangle2D area, Point2D anchor,
PlotState parentState, PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
area.setRect(area.getX() + insets.getLeft(),
area.getY() + insets.getTop(),
area.getWidth() - insets.getLeft() - insets.getRight(),
area.getHeight() - insets.getTop() - insets.getBottom());
// calculate the data area...
setFixedRangeAxisSpaceForSubplots(null);
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
// set the width and height of non-shared axis of all sub-plots
setFixedRangeAxisSpaceForSubplots(space);
// draw the shared axis
CategoryAxis axis = getDomainAxis();
RectangleEdge domainEdge = getDomainAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, domainEdge);
AxisState axisState = axis.draw(g2, cursor, area, dataArea,
domainEdge, info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, axisState);
// draw all the subplots
for (int i = 0; i < this.subplots.size(); i++) {
CategoryPlot plot = (CategoryPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
Point2D subAnchor = null;
if (anchor != null && this.subplotAreas[i].contains(anchor)) {
subAnchor = anchor;
}
plot.draw(g2, this.subplotAreas[i], subAnchor, parentState,
subplotInfo);
}
if (info != null) {
info.setDataArea(dataArea);
}
}
Example 15
| Source File: CombinedDomainXYPlot.java From buffer_bci with GNU General Public License v3.0 | 4 votes |
|
/**
* Draws the plot within the specified area on a graphics device.
*
* @param g2 the graphics device.
* @param area the plot area (in Java2D space).
* @param anchor an anchor point in Java2D space (<code>null</code>
* permitted).
* @param parentState the state from the parent plot, if there is one
* (<code>null</code> permitted).
* @param info collects chart drawing information (<code>null</code>
* permitted).
*/
@Override
public void draw(Graphics2D g2, Rectangle2D area, Point2D anchor,
PlotState parentState, PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
insets.trim(area);
setFixedRangeAxisSpaceForSubplots(null);
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
// set the width and height of non-shared axis of all sub-plots
setFixedRangeAxisSpaceForSubplots(space);
// draw the shared axis
ValueAxis axis = getDomainAxis();
RectangleEdge edge = getDomainAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, edge);
AxisState axisState = axis.draw(g2, cursor, area, dataArea, edge, info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, axisState);
// draw all the subplots
for (int i = 0; i < this.subplots.size(); i++) {
XYPlot plot = (XYPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
plot.draw(g2, this.subplotAreas[i], anchor, parentState,
subplotInfo);
}
if (info != null) {
info.setDataArea(dataArea);
}
}
Example 16
| Source File: CombinedRangeCategoryPlot.java From ccu-historian with GNU General Public License v3.0 | 4 votes |
|
/**
* Draws the plot on a Java 2D graphics device (such as the screen or a
* printer). Will perform all the placement calculations for each
* sub-plots and then tell these to draw themselves.
*
* @param g2 the graphics device.
* @param area the area within which the plot (including axis labels)
* should be drawn.
* @param anchor the anchor point (<code>null</code> permitted).
* @param parentState the parent state.
* @param info collects information about the drawing (<code>null</code>
* permitted).
*/
@Override
public void draw(Graphics2D g2, Rectangle2D area, Point2D anchor,
PlotState parentState,
PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
insets.trim(area);
// calculate the data area...
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
// set the width and height of non-shared axis of all sub-plots
setFixedDomainAxisSpaceForSubplots(space);
// draw the shared axis
ValueAxis axis = getRangeAxis();
RectangleEdge rangeEdge = getRangeAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, rangeEdge);
AxisState state = axis.draw(g2, cursor, area, dataArea, rangeEdge,
info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, state);
// draw all the charts
for (int i = 0; i < this.subplots.size(); i++) {
CategoryPlot plot = (CategoryPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
Point2D subAnchor = null;
if (anchor != null && this.subplotArea[i].contains(anchor)) {
subAnchor = anchor;
}
plot.draw(g2, this.subplotArea[i], subAnchor, parentState,
subplotInfo);
}
if (info != null) {
info.setDataArea(dataArea);
}
}
Example 17
| Source File: CombinedRangeCategoryPlot.java From buffer_bci with GNU General Public License v3.0 | 4 votes |
|
/**
* Draws the plot on a Java 2D graphics device (such as the screen or a
* printer). Will perform all the placement calculations for each
* sub-plots and then tell these to draw themselves.
*
* @param g2 the graphics device.
* @param area the area within which the plot (including axis labels)
* should be drawn.
* @param anchor the anchor point (<code>null</code> permitted).
* @param parentState the parent state.
* @param info collects information about the drawing (<code>null</code>
* permitted).
*/
@Override
public void draw(Graphics2D g2, Rectangle2D area, Point2D anchor,
PlotState parentState,
PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
insets.trim(area);
// calculate the data area...
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
// set the width and height of non-shared axis of all sub-plots
setFixedDomainAxisSpaceForSubplots(space);
// draw the shared axis
ValueAxis axis = getRangeAxis();
RectangleEdge rangeEdge = getRangeAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, rangeEdge);
AxisState state = axis.draw(g2, cursor, area, dataArea, rangeEdge,
info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, state);
// draw all the charts
for (int i = 0; i < this.subplots.size(); i++) {
CategoryPlot plot = (CategoryPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
Point2D subAnchor = null;
if (anchor != null && this.subplotArea[i].contains(anchor)) {
subAnchor = anchor;
}
plot.draw(g2, this.subplotArea[i], subAnchor, parentState,
subplotInfo);
}
if (info != null) {
info.setDataArea(dataArea);
}
}
Example 18
| Source File: CombinedDomainCategoryPlot.java From openstock with GNU General Public License v3.0 | 4 votes |
|
/**
* Draws the plot on a Java 2D graphics device (such as the screen or a
* printer). Will perform all the placement calculations for each of the
* sub-plots and then tell these to draw themselves.
*
* @param g2 the graphics device.
* @param area the area within which the plot (including axis labels)
* should be drawn.
* @param anchor the anchor point (<code>null</code> permitted).
* @param parentState the state from the parent plot, if there is one.
* @param info collects information about the drawing (<code>null</code>
* permitted).
*/
@Override
public void draw(Graphics2D g2, Rectangle2D area, Point2D anchor,
PlotState parentState, PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
area.setRect(area.getX() + insets.getLeft(),
area.getY() + insets.getTop(),
area.getWidth() - insets.getLeft() - insets.getRight(),
area.getHeight() - insets.getTop() - insets.getBottom());
// calculate the data area...
setFixedRangeAxisSpaceForSubplots(null);
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
// set the width and height of non-shared axis of all sub-plots
setFixedRangeAxisSpaceForSubplots(space);
// draw the shared axis
CategoryAxis axis = getDomainAxis();
RectangleEdge domainEdge = getDomainAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, domainEdge);
AxisState axisState = axis.draw(g2, cursor, area, dataArea,
domainEdge, info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, axisState);
// draw all the subplots
for (int i = 0; i < this.subplots.size(); i++) {
CategoryPlot plot = (CategoryPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
Point2D subAnchor = null;
if (anchor != null && this.subplotAreas[i].contains(anchor)) {
subAnchor = anchor;
}
plot.draw(g2, this.subplotAreas[i], subAnchor, parentState,
subplotInfo);
}
if (info != null) {
info.setDataArea(dataArea);
}
}
Example 19
| Source File: CombinedRangeXYPlot.java From openstock with GNU General Public License v3.0 | 4 votes |
|
/**
* Draws the plot within the specified area on a graphics device.
*
* @param g2 the graphics device.
* @param area the plot area (in Java2D space).
* @param anchor an anchor point in Java2D space (<code>null</code>
* permitted).
* @param parentState the state from the parent plot, if there is one
* (<code>null</code> permitted).
* @param info collects chart drawing information (<code>null</code>
* permitted).
*/
@Override
public void draw(Graphics2D g2, Rectangle2D area, Point2D anchor,
PlotState parentState, PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
insets.trim(area);
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
//this.axisOffset.trim(dataArea);
// set the width and height of non-shared axis of all sub-plots
setFixedDomainAxisSpaceForSubplots(space);
// draw the shared axis
ValueAxis axis = getRangeAxis();
RectangleEdge edge = getRangeAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, edge);
AxisState axisState = axis.draw(g2, cursor, area, dataArea, edge, info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, axisState);
// draw all the charts
for (int i = 0; i < this.subplots.size(); i++) {
XYPlot plot = (XYPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
plot.draw(g2, this.subplotAreas[i], anchor, parentState,
subplotInfo);
}
if (info != null) {
info.setDataArea(dataArea);
}
}
Example 20
| Source File: CombinedRangeCategoryPlot.java From buffer_bci with GNU General Public License v3.0 | 4 votes |
|
/**
* Draws the plot on a Java 2D graphics device (such as the screen or a
* printer). Will perform all the placement calculations for each
* sub-plots and then tell these to draw themselves.
*
* @param g2 the graphics device.
* @param area the area within which the plot (including axis labels)
* should be drawn.
* @param anchor the anchor point (<code>null</code> permitted).
* @param parentState the parent state.
* @param info collects information about the drawing (<code>null</code>
* permitted).
*/
@Override
public void draw(Graphics2D g2, Rectangle2D area, Point2D anchor,
PlotState parentState,
PlotRenderingInfo info) {
// set up info collection...
if (info != null) {
info.setPlotArea(area);
}
// adjust the drawing area for plot insets (if any)...
RectangleInsets insets = getInsets();
insets.trim(area);
// calculate the data area...
AxisSpace space = calculateAxisSpace(g2, area);
Rectangle2D dataArea = space.shrink(area, null);
// set the width and height of non-shared axis of all sub-plots
setFixedDomainAxisSpaceForSubplots(space);
// draw the shared axis
ValueAxis axis = getRangeAxis();
RectangleEdge rangeEdge = getRangeAxisEdge();
double cursor = RectangleEdge.coordinate(dataArea, rangeEdge);
AxisState state = axis.draw(g2, cursor, area, dataArea, rangeEdge,
info);
if (parentState == null) {
parentState = new PlotState();
}
parentState.getSharedAxisStates().put(axis, state);
// draw all the charts
for (int i = 0; i < this.subplots.size(); i++) {
CategoryPlot plot = (CategoryPlot) this.subplots.get(i);
PlotRenderingInfo subplotInfo = null;
if (info != null) {
subplotInfo = new PlotRenderingInfo(info.getOwner());
info.addSubplotInfo(subplotInfo);
}
Point2D subAnchor = null;
if (anchor != null && this.subplotArea[i].contains(anchor)) {
subAnchor = anchor;
}
plot.draw(g2, this.subplotArea[i], subAnchor, parentState,
subplotInfo);
}
if (info != null) {
info.setDataArea(dataArea);
}
}
